chelsio: the return statement is not a function

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

drivers/net/chelsio/my3126.c

@@ -10,25 +10,25 @@ static int my3126_reset(struct cphy *cphy, int wait)
 	 * This can be done through registers.  It is not required since
 	 * a full chip reset is used.
 	 */
-	return (0);
+	return 0;
 }
 
 static int my3126_interrupt_enable(struct cphy *cphy)
 {
 	schedule_delayed_work(&cphy->phy_update, HZ/30);
 	t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
-	return (0);
+	return 0;
 }
 
 static int my3126_interrupt_disable(struct cphy *cphy)
 {
 	cancel_rearming_delayed_work(&cphy->phy_update);
-	return (0);
+	return 0;
 }
 
 static int my3126_interrupt_clear(struct cphy *cphy)
 {
-	return (0);
+	return 0;
 }
 
 #define OFFSET(REG_ADDR)    (REG_ADDR << 2)
@@ -102,7 +102,7 @@ static void my3216_poll(struct work_struct *work)
 
 static int my3126_set_loopback(struct cphy *cphy, int on)
 {
-	return (0);
+	return 0;
 }
 
 /* To check the activity LED */
@@ -146,7 +146,7 @@ static int my3126_get_link_status(struct cphy *cphy,
 	if (fc)
 		*fc = PAUSE_RX | PAUSE_TX;
 
-	return (0);
+	return 0;
 }
 
 static void my3126_destroy(struct cphy *cphy)
@@ -177,7 +177,7 @@ static struct cphy *my3126_phy_create(adapter_t *adapter,
 	INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
 	cphy->bmsr = 0;
 
-	return (cphy);
+	return cphy;
 }
 
 /* Chip Reset */
@@ -198,7 +198,7 @@ static int my3126_phy_reset(adapter_t * adapter)
 	val |= 0x8000;
 	t1_tpi_write(adapter, A_ELMER0_GPO, val);
 	udelay(100);
-	return (0);
+	return 0;
 }
 
 struct gphy t1_my3126_ops = {

drivers/net/chelsio/vsc7326.c

@@ -256,7 +256,7 @@ static int bist_rd(adapter_t *adapter, int moduleid, int address)
 	else if((result & (1<<8)) != 0x0)
 		CH_ERR("bist read error: 0x%x\n", result);
 
-	return(result & 0xff);
+	return (result & 0xff);
 }
 
 static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
@@ -286,7 +286,7 @@ static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
 	else if((result & (1<<26)) != 0x0)
 		CH_ERR("bist write error: 0x%x\n", result);
 
-	return(0);
+	return 0;
 }
 
 static int run_bist(adapter_t *adapter, int moduleid)
@@ -295,7 +295,7 @@ static int run_bist(adapter_t *adapter, int moduleid)
 	(void) bist_wr(adapter,moduleid, 0x00, 0x02);
 	(void) bist_wr(adapter,moduleid, 0x01, 0x01);
 
-	return(0);
+	return 0;
 }
 
 static int check_bist(adapter_t *adapter, int moduleid)
@@ -309,14 +309,14 @@ static int check_bist(adapter_t *adapter, int moduleid)
 	if ((result & 3) != 0x3)
 		CH_ERR("Result: 0x%x  BIST error in ram %d, column: 0x%04x\n",
 			result, moduleid, column);
-	return(0);
+	return 0;
 }
 
 static int enable_mem(adapter_t *adapter, int moduleid)
 {
 	/*enable mem*/
 	(void) bist_wr(adapter,moduleid, 0x00, 0x00);
-	return(0);
+	return 0;
 }
 
 static int run_bist_all(adapter_t *adapter)
@@ -358,7 +358,7 @@ static int run_bist_all(adapter_t *adapter)
 	udelay(300);
 	vsc_write(adapter, REG_MEM_BIST, 0x0);
 	mdelay(10);
-	return(0);
+	return 0;
 }
 
 static int mac_intr_handler(struct cmac *mac)