DMA: PL330: Merge PL330 driver into drivers/dma/

Currently there were two part of DMAC PL330 driver for
support old styled s3c-pl330 which has been merged into
drivers/dma/pl330.c driver. Actually, there is no reason
to separate them now.

Basically this patch merges arch/arm/common/pl330.c into
drivers/dma/pl330.c driver and removes useless exported
symbol, externed function and so on.

The newer pl330 driver tested on SMDKV310 and SMDK4212 boards

Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>

arch/arm/common/Kconfig

@@ -24,9 +24,6 @@ config ARM_VIC_NR
 config ICST
 	bool
 
-config PL330
-	bool
-
 config SA1111
 	bool
 	select DMABOUNCE if !ARCH_PXA

arch/arm/common/Makefile

@@ -5,7 +5,6 @@
 obj-$(CONFIG_ARM_GIC)		+= gic.o
 obj-$(CONFIG_ARM_VIC)		+= vic.o
 obj-$(CONFIG_ICST)		+= icst.o
-obj-$(CONFIG_PL330)		+= pl330.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o

arch/arm/include/asm/hardware/pl330.h

-/* linux/include/asm/hardware/pl330.h
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __PL330_CORE_H
-#define __PL330_CORE_H
-
-#define PL330_MAX_CHAN		8
-#define PL330_MAX_IRQS		32
-#define PL330_MAX_PERI		32
-
-enum pl330_srccachectrl {
-	SCCTRL0 = 0, /* Noncacheable and nonbufferable */
-	SCCTRL1, /* Bufferable only */
-	SCCTRL2, /* Cacheable, but do not allocate */
-	SCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	SINVALID1,
-	SINVALID2,
-	SCCTRL6, /* Cacheable write-through, allocate on reads only */
-	SCCTRL7, /* Cacheable write-back, allocate on reads only */
-};
-
-enum pl330_dstcachectrl {
-	DCCTRL0 = 0, /* Noncacheable and nonbufferable */
-	DCCTRL1, /* Bufferable only */
-	DCCTRL2, /* Cacheable, but do not allocate */
-	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1 = 8,
-	DINVALID2,
-	DCCTRL6, /* Cacheable write-through, allocate on writes only */
-	DCCTRL7, /* Cacheable write-back, allocate on writes only */
-};
-
-/* Populated by the PL330 core driver for DMA API driver's info */
-struct pl330_config {
-	u32	periph_id;
-	u32	pcell_id;
-#define DMAC_MODE_NS	(1 << 0)
-	unsigned int	mode;
-	unsigned int	data_bus_width:10; /* In number of bits */
-	unsigned int	data_buf_dep:10;
-	unsigned int	num_chan:4;
-	unsigned int	num_peri:6;
-	u32		peri_ns;
-	unsigned int	num_events:6;
-	u32		irq_ns;
-};
-
-/* Handle to the DMAC provided to the PL330 core */
-struct pl330_info {
-	/* Owning device */
-	struct device *dev;
-	/* Size of MicroCode buffers for each channel. */
-	unsigned mcbufsz;
-	/* ioremap'ed address of PL330 registers. */
-	void __iomem	*base;
-	/* Client can freely use it. */
-	void	*client_data;
-	/* PL330 core data, Client must not touch it. */
-	void	*pl330_data;
-	/* Populated by the PL330 core driver during pl330_add */
-	struct pl330_config	pcfg;
-	/*
-	 * If the DMAC has some reset mechanism, then the
-	 * client may want to provide pointer to the method.
-	 */
-	void (*dmac_reset)(struct pl330_info *pi);
-};
-
-enum pl330_byteswap {
-	SWAP_NO = 0,
-	SWAP_2,
-	SWAP_4,
-	SWAP_8,
-	SWAP_16,
-};
-
-/**
- * Request Configuration.
- * The PL330 core does not modify this and uses the last
- * working configuration if the request doesn't provide any.
- *
- * The Client may want to provide this info only for the
- * first request and a request with new settings.
- */
-struct pl330_reqcfg {
-	/* Address Incrementing */
-	unsigned dst_inc:1;
-	unsigned src_inc:1;
-
-	/*
-	 * For now, the SRC & DST protection levels
-	 * and burst size/length are assumed same.
-	 */
-	bool nonsecure;
-	bool privileged;
-	bool insnaccess;
-	unsigned brst_len:5;
-	unsigned brst_size:3; /* in power of 2 */
-
-	enum pl330_dstcachectrl dcctl;
-	enum pl330_srccachectrl scctl;
-	enum pl330_byteswap swap;
-};
-
-/*
- * One cycle of DMAC operation.
- * There may be more than one xfer in a request.
- */
-struct pl330_xfer {
-	u32 src_addr;
-	u32 dst_addr;
-	/* Size to xfer */
-	u32 bytes;
-	/*
-	 * Pointer to next xfer in the list.
-	 * The last xfer in the req must point to NULL.
-	 */
-	struct pl330_xfer *next;
-};
-
-/* The xfer callbacks are made with one of these arguments. */
-enum pl330_op_err {
-	/* The all xfers in the request were success. */
-	PL330_ERR_NONE,
-	/* If req aborted due to global error. */
-	PL330_ERR_ABORT,
-	/* If req failed due to problem with Channel. */
-	PL330_ERR_FAIL,
-};
-
-enum pl330_reqtype {
-	MEMTOMEM,
-	MEMTODEV,
-	DEVTOMEM,
-	DEVTODEV,
-};
-
-/* A request defining Scatter-Gather List ending with NULL xfer. */
-struct pl330_req {
-	enum pl330_reqtype rqtype;
-	/* Index of peripheral for the xfer. */
-	unsigned peri:5;
-	/* Unique token for this xfer, set by the client. */
-	void *token;
-	/* Callback to be called after xfer. */
-	void (*xfer_cb)(void *token, enum pl330_op_err err);
-	/* If NULL, req will be done at last set parameters. */
-	struct pl330_reqcfg *cfg;
-	/* Pointer to first xfer in the request. */
-	struct pl330_xfer *x;
-};
-
-/*
- * To know the status of the channel and DMAC, the client
- * provides a pointer to this structure. The PL330 core
- * fills it with current information.
- */
-struct pl330_chanstatus {
-	/*
-	 * If the DMAC engine halted due to some error,
-	 * the client should remove-add DMAC.
-	 */
-	bool dmac_halted;
-	/*
-	 * If channel is halted due to some error,
-	 * the client should ABORT/FLUSH and START the channel.
-	 */
-	bool faulting;
-	/* Location of last load */
-	u32 src_addr;
-	/* Location of last store */
-	u32 dst_addr;
-	/*
-	 * Pointer to the currently active req, NULL if channel is
-	 * inactive, even though the requests may be present.
-	 */
-	struct pl330_req *top_req;
-	/* Pointer to req waiting second in the queue if any. */
-	struct pl330_req *wait_req;
-};
-
-enum pl330_chan_op {
-	/* Start the channel */
-	PL330_OP_START,
-	/* Abort the active xfer */
-	PL330_OP_ABORT,
-	/* Stop xfer and flush queue */
-	PL330_OP_FLUSH,
-};
-
-extern int pl330_add(struct pl330_info *);
-extern void pl330_del(struct pl330_info *pi);
-extern int pl330_update(const struct pl330_info *pi);
-extern void pl330_release_channel(void *ch_id);
-extern void *pl330_request_channel(const struct pl330_info *pi);
-extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus);
-extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op);
-extern int pl330_submit_req(void *ch_id, struct pl330_req *r);
-
-#endif	/* __PL330_CORE_H */

drivers/dma/Kconfig

@@ -201,7 +201,6 @@ config PL330_DMA
 	tristate "DMA API Driver for PL330"
 	select DMA_ENGINE
 	depends on ARM_AMBA
-	select PL330
 	help
 	  Select if your platform has one or more PL330 DMACs.
 	  You need to provide platform specific settings via

include/linux/amba/pl330.h

@@ -13,7 +13,6 @@
 #define	__AMBA_PL330_H_
 
 #include <linux/dmaengine.h>
-#include <asm/hardware/pl330.h>
 
 struct dma_pl330_platdata {
 	/*