wil6210: sync with new firmware

Adjust driver for changes in the FW API.
Noticeable changes in the FW are:
- temperature sensing
- infrastructure for multiple connections
- infrastructure for P2P
- signal strength indication

This commit introduces only changes that are required to support same functionality
as previous firmware, no new features.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/wil6210/cfg80211.c

@@ -427,10 +427,6 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	if (rc)
 		return rc;
 
-	rc = wmi_set_channel(wil, channel->hw_value);
-	if (rc)
-		return rc;
-
 	/* MAC address - pre-requisite for other commands */
 	wmi_set_mac_address(wil, ndev->dev_addr);
 
@@ -450,7 +446,8 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 
 	wil->secure_pcp = info->privacy;
 
-	rc = wmi_set_bcon(wil, info->beacon_interval, wmi_nettype);
+	rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
+			   channel->hw_value);
 	if (rc)
 		return rc;
 
@@ -467,11 +464,8 @@ static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
 {
 	int rc = 0;
 	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
-	struct wireless_dev *wdev = ndev->ieee80211_ptr;
-	u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
 
-	/* To stop beaconing, set BI to 0 */
-	rc = wmi_set_bcon(wil, 0, wmi_nettype);
+	rc = wmi_pcp_stop(wil);
 
 	return rc;
 }

drivers/net/wireless/ath/wil6210/main.c

@@ -343,9 +343,9 @@ static int __wil_up(struct wil6210_priv *wil)
 			wil_err(wil, "SSID not set\n");
 			return -EINVAL;
 		}
-		wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
-		if (channel)
-			wmi_set_channel(wil, channel->hw_value);
+		rc = wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid);
+		if (rc)
+			return rc;
 		break;
 	default:
 		break;
@@ -355,9 +355,12 @@ static int __wil_up(struct wil6210_priv *wil)
 	wmi_set_mac_address(wil, ndev->dev_addr);
 
 	/* Set up beaconing if required. */
-	rc = wmi_set_bcon(wil, bi, wmi_nettype);
-	if (rc)
-		return rc;
+	if (bi > 0) {
+		rc = wmi_pcp_start(wil, bi, wmi_nettype,
+				   (channel ? channel->hw_value : 0));
+		if (rc)
+			return rc;
+	}
 
 	/* Rx VRING. After MAC and beacon */
 	wil_rx_init(wil);

drivers/net/wireless/ath/wil6210/txrx.c

@@ -557,7 +557,7 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 	if (rc)
 		goto out_free;
 
-	if (reply.cmd.status != WMI_VRING_CFG_SUCCESS) {
+	if (reply.cmd.status != WMI_FW_STATUS_SUCCESS) {
 		wil_err(wil, "Tx config failed, status 0x%02x\n",
 			reply.cmd.status);
 		rc = -EINVAL;

drivers/net/wireless/ath/wil6210/wil6210.h

@@ -209,6 +209,8 @@ struct wil6210_priv {
 	struct wireless_dev *wdev;
 	void __iomem *csr;
 	ulong status;
+	u32 fw_version;
+	u8 n_mids; /* number of additional MIDs as reported by FW */
 	/* profile */
 	u32 monitor_flags;
 	u32 secure_pcp; /* create secure PCP? */
@@ -326,6 +328,7 @@ int wmi_add_cipher_key(struct wil6210_priv *wil, u8 key_index,
 int wmi_echo(struct wil6210_priv *wil);
 int wmi_set_ie(struct wil6210_priv *wil, u8 type, u16 ie_len, const void *ie);
 int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring);
+int wmi_p2p_cfg(struct wil6210_priv *wil, int channel);
 
 int wil6210_init_irq(struct wil6210_priv *wil, int irq);
 void wil6210_fini_irq(struct wil6210_priv *wil, int irq);
@@ -339,7 +342,8 @@ struct wireless_dev *wil_cfg80211_init(struct device *dev);
 void wil_wdev_free(struct wil6210_priv *wil);
 
 int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
-int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype);
+int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan);
+int wmi_pcp_stop(struct wil6210_priv *wil);
 void wil6210_disconnect(struct wil6210_priv *wil, void *bssid);
 
 int wil_rx_init(struct wil6210_priv *wil);

drivers/net/wireless/ath/wil6210/wmi.c

@@ -269,16 +269,18 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len)
 	struct net_device *ndev = wil_to_ndev(wil);
 	struct wireless_dev *wdev = wil->wdev;
 	struct wmi_ready_event *evt = d;
-	u32 ver = le32_to_cpu(evt->sw_version);
+	wil->fw_version = le32_to_cpu(evt->sw_version);
+	wil->n_mids = evt->numof_additional_mids;
 
-	wil_dbg_wmi(wil, "FW ver. %d; MAC %pM\n", ver, evt->mac);
+	wil_dbg_wmi(wil, "FW ver. %d; MAC %pM; %d MID's\n", wil->fw_version,
+		    evt->mac, wil->n_mids);
 
 	if (!is_valid_ether_addr(ndev->dev_addr)) {
 		memcpy(ndev->dev_addr, evt->mac, ETH_ALEN);
 		memcpy(ndev->perm_addr, evt->mac, ETH_ALEN);
 	}
 	snprintf(wdev->wiphy->fw_version, sizeof(wdev->wiphy->fw_version),
-		 "%d", ver);
+		 "%d", wil->fw_version);
 }
 
 static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d,
@@ -714,18 +716,39 @@ int wmi_set_mac_address(struct wil6210_priv *wil, void *addr)
 	return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd));
 }
 
-int wmi_set_bcon(struct wil6210_priv *wil, int bi, u8 wmi_nettype)
+int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan)
 {
-	struct wmi_bcon_ctrl_cmd cmd = {
+	int rc;
+
+	struct wmi_pcp_start_cmd cmd = {
 		.bcon_interval = cpu_to_le16(bi),
 		.network_type = wmi_nettype,
 		.disable_sec_offload = 1,
+		.channel = chan,
 	};
+	struct {
+		struct wil6210_mbox_hdr_wmi wmi;
+		struct wmi_pcp_started_event evt;
+	} __packed reply;
 
 	if (!wil->secure_pcp)
 		cmd.disable_sec = 1;
 
-	return wmi_send(wil, WMI_BCON_CTRL_CMDID, &cmd, sizeof(cmd));
+	rc = wmi_call(wil, WMI_PCP_START_CMDID, &cmd, sizeof(cmd),
+		      WMI_PCP_STARTED_EVENTID, &reply, sizeof(reply), 100);
+	if (rc)
+		return rc;
+
+	if (reply.evt.status != WMI_FW_STATUS_SUCCESS)
+		rc = -EINVAL;
+
+	return rc;
+}
+
+int wmi_pcp_stop(struct wil6210_priv *wil)
+{
+	return wmi_call(wil, WMI_PCP_STOP_CMDID, NULL, 0,
+			WMI_PCP_STOPPED_EVENTID, NULL, 0, 20);
 }
 
 int wmi_set_ssid(struct wil6210_priv *wil, u8 ssid_len, const void *ssid)
@@ -796,6 +819,16 @@ int wmi_get_channel(struct wil6210_priv *wil, int *channel)
 	return 0;
 }
 
+int wmi_p2p_cfg(struct wil6210_priv *wil, int channel)
+{
+	struct wmi_p2p_cfg_cmd cmd = {
+		.discovery_mode = WMI_DISCOVERY_MODE_NON_OFFLOAD,
+		.channel = channel - 1,
+	};
+
+	return wmi_send(wil, WMI_P2P_CFG_CMDID, &cmd, sizeof(cmd));
+}
+
 int wmi_tx_eapol(struct wil6210_priv *wil, struct sk_buff *skb)
 {
 	struct wmi_eapol_tx_cmd *cmd;