Commit b8ab0ccc authored by Sylwester Nawrocki's avatar Sylwester Nawrocki Committed by Mark Brown

ASoC: Revert "samsung: Remove unneeded initialization of chan_name"

This reverts commit cdaf9af1
which breaks I2S support on the non-DT Samsung SoC platforms,
since the default "tx", "rx" DMA channel names for playback
and capture streams or custom channel names in struct
snd_dmaengine_pcm_config are supported in the ASoC dmaengine
module only for devicetree booting case.
Signed-off-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent a5de5b74
......@@ -37,8 +37,12 @@ int samsung_asoc_dma_platform_register(struct device *dev, dma_filter_fn filter,
pcm_conf->prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config;
pcm_conf->compat_filter_fn = filter;
pcm_conf->chan_names[SNDRV_PCM_STREAM_PLAYBACK] = tx;
pcm_conf->chan_names[SNDRV_PCM_STREAM_CAPTURE] = rx;
if (dev->of_node) {
pcm_conf->chan_names[SNDRV_PCM_STREAM_PLAYBACK] = tx;
pcm_conf->chan_names[SNDRV_PCM_STREAM_CAPTURE] = rx;
} else {
flags |= SND_DMAENGINE_PCM_FLAG_CUSTOM_CHANNEL_NAME;
}
return devm_snd_dmaengine_pcm_register(dev, pcm_conf, flags);
}
......
......@@ -1305,6 +1305,8 @@ static int samsung_i2s_probe(struct platform_device *pdev)
}
pri_dai->dma_playback.addr = regs_base + I2STXD;
pri_dai->dma_capture.addr = regs_base + I2SRXD;
pri_dai->dma_playback.chan_name = "tx";
pri_dai->dma_capture.chan_name = "rx";
pri_dai->dma_playback.addr_width = 4;
pri_dai->dma_capture.addr_width = 4;
pri_dai->quirks = quirks;
......@@ -1329,6 +1331,7 @@ static int samsung_i2s_probe(struct platform_device *pdev)
sec_dai->lock = &pri_dai->spinlock;
sec_dai->variant_regs = pri_dai->variant_regs;
sec_dai->dma_playback.addr = regs_base + I2STXDS;
sec_dai->dma_playback.chan_name = "tx-sec";
if (!np) {
sec_dai->dma_playback.filter_data = i2s_pdata->dma_play_sec;
......
......@@ -35,10 +35,12 @@
#include <linux/platform_data/asoc-s3c.h>
static struct snd_dmaengine_dai_dma_data s3c2412_i2s_pcm_stereo_out = {
.chan_name = "tx",
.addr_width = 4,
};
static struct snd_dmaengine_dai_dma_data s3c2412_i2s_pcm_stereo_in = {
.chan_name = "rx",
.addr_width = 4,
};
......
......@@ -31,10 +31,12 @@
#include "s3c24xx-i2s.h"
static struct snd_dmaengine_dai_dma_data s3c24xx_i2s_pcm_stereo_out = {
.chan_name = "tx",
.addr_width = 2,
};
static struct snd_dmaengine_dai_dma_data s3c24xx_i2s_pcm_stereo_in = {
.chan_name = "rx",
.addr_width = 2,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment