Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable

Conflicts:
	arch/arm/Makefile

MAINTAINERS

@@ -662,6 +662,12 @@ T:	git://git.pengutronix.de/git/imx/linux-2.6.git
 F:	arch/arm/mach-mx*/
 F:	arch/arm/plat-mxc/
 
+ARM/FREESCALE IMX51
+M:	Amit Kucheria <amit.kucheria@canonical.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-mx5/
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/Kconfig

@@ -310,10 +310,9 @@ config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select ARCH_MTD_XIP
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select COMMON_CLKDEV
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 

arch/arm/Makefile

@@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik

arch/arm/configs/mx27_defconfig

@@ -200,7 +200,7 @@ CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
 CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_MX27LITE=y
+CONFIG_MACH_IMX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 

arch/arm/mach-mx1/Makefile

@@ -4,11 +4,12 @@
 
 # Object file lists.
 
+EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-y			+= generic.o clock.o devices.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO)	+= ksym_mx1.o mx1_camera_fiq.o
 
 # Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o

arch/arm/mach-mx1/mx1ads.c → arch/arm/mach-mx1/mach-mx1ads.c

 /*
- * arch/arm/mach-imx/mx1ads.c
+ * arch/arm/mach-imx/mach-mx1ads.c
  *
  * Initially based on:
  *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
@@ -27,7 +27,7 @@
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
 
 #include "devices.h"
@@ -147,7 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
@@ -157,7 +157,7 @@ MACHINE_END
 MACHINE_START(MXLADS, "Freescale MXLADS")
 	.phys_io	= IMX_IO_PHYS,
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.boot_params	= MX1_PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
 	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,

arch/arm/mach-mx1/scb9328.c → arch/arm/mach-mx1/mach-scb9328.c

 /*
- * linux/arch/arm/mach-mx1/scb9328.c
+ * linux/arch/arm/mach-mx1/mach-scb9328.c
  *
  * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
  * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
@@ -23,7 +23,7 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx1.h>
 
 #include "devices.h"
 

arch/arm/mach-mx2/Kconfig

@@ -37,6 +37,7 @@ config MACH_MX27ADS
 config MACH_PCM038
 	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
 	depends on MACH_MX27
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 	  includes specific configurations for the module and its peripherals.
@@ -55,7 +56,7 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
-config MACH_EUKREA_CPUIMX27
+config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
 	depends on MACH_MX27
 	help
@@ -64,14 +65,14 @@ config MACH_EUKREA_CPUIMX27
 
 config MACH_EUKREA_CPUIMX27_USESDHC2
 	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_EUKREA_CPUIMX27
+	depends on MACH_CPUIMX27
 	help
 	  This adds support for the internal SDHC2 used on CPUIMX27 used
 	  for wifi or eMMC.
 
 choice
 	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX27
+	depends on MACH_CPUIMX27
 	default MACH_EUKREA_MBIMX27_BASEBOARD
 
 config MACH_EUKREA_MBIMX27_BASEBOARD
@@ -90,7 +91,7 @@ config MACH_MX27_3DS
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_MX27LITE
+config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
 	depends on MACH_MX27
 	help
@@ -100,6 +101,7 @@ config MACH_MX27LITE
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
 	depends on MACH_MX27
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.

arch/arm/mach-mx2/Makefile

@@ -4,21 +4,20 @@
 
 # Object file lists.
 
-obj-y	:=  generic.o devices.o serial.o
+obj-y	:=  devices.o serial.o
 
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o
+obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
 
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
 
-obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
-obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
-
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o

arch/arm/mach-mx2/clock_imx21.c

@@ -23,11 +23,242 @@
 #include <linux/module.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 #include <mach/common.h>
 #include <asm/clkdev.h>
 #include <asm/div64.h>
 
-#include "crm_regs.h"
+#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_PRESC_OFFSET	29
+#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET	24
+#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES	(1 << 22)
+#define CCM_CSCR_MPLLRES	(1 << 21)
+#define CCM_CSCR_SSI2_OFFSET	20
+#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET	19
+#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET	18
+#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP		(1 << 17)
+#define CCM_CSCR_MCU		(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET	9
+#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV	(1 << 4)
+#define CCM_CSCR_OSC26M		(1 << 3)
+#define CCM_CSCR_FPM		(1 << 2)
+#define CCM_CSCR_SPEN		(1 << 1)
+#define CCM_CSCR_MPEN		1
+
+#define CCM_MPCTL0_CPLM		(1 << 31)
+#define CCM_MPCTL0_PD_OFFSET	26
+#define CCM_MPCTL0_PD_MASK	(0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET	16
+#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET	10
+#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET	0
+#define CCM_MPCTL0_MFN_MASK	0x3ff
+
+#define CCM_MPCTL1_LF		(1 << 15)
+#define CCM_MPCTL1_BRMO		(1 << 6)
+
+#define CCM_SPCTL0_CPLM		(1 << 31)
+#define CCM_SPCTL0_PD_OFFSET	26
+#define CCM_SPCTL0_PD_MASK	(0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET	16
+#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET	10
+#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET	0
+#define CCM_SPCTL0_MFN_MASK	0x3ff
+
+#define CCM_SPCTL1_LF		(1 << 15)
+#define CCM_SPCTL1_BRMO		(1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET	16
+#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET	8
+#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET	0
+#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET		12
+#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET		5
+#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET	0
+#define CCM_PCDR0_FIRIDIV_MASK		0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET	24
+#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET	16
+#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET	8
+#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET	0
+#define CCM_PCDR1_PERDIV1_MASK		0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET	31
+#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET	30
+#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET	28
+#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET	27
+#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET	26
+#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
+#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
+#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET	23
+#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET		22
+#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET		21
+#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET	20
+#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET		19
+#define CCM_PCCR_NFC_REG		CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET		18
+#define CCM_PCCR_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET	17
+#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET	16
+#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET		15
+#define CCM_PCCR_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET		14
+#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET		13
+#define CCM_PCCR_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET		12
+#define CCM_PCCR_I2C1_REG		CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET		11
+#define CCM_PCCR_GPIO_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET		10
+#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET		9
+#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET		8
+#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET	7
+#define CCM_PCCR_SSI2_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET	6
+#define CCM_PCCR_SSI1_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET		5
+#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET		4
+#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET		3
+#define CCM_PCCR_UART4_REG		CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET		2
+#define CCM_PCCR_UART3_REG		CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET		1
+#define CCM_PCCR_UART2_REG		CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET		0
+#define CCM_PCCR_UART1_REG		CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET		31
+#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET		30
+#define CCM_PCCR_KPP_REG		CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET		29
+#define CCM_PCCR_RTC_REG		CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET		28
+#define CCM_PCCR_PWM_REG		CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET		27
+#define CCM_PCCR_GPT3_REG		CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET		26
+#define CCM_PCCR_GPT2_REG		CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET		25
+#define CCM_PCCR_GPT1_REG		CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET		24
+#define CCM_PCCR_WDT_REG		CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET		23
+#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
+
+#define CCM_CCSR_32KSR		(1 << 15)
+
+#define CCM_CCSR_CLKMODE1	(1 << 9)
+#define CCM_CCSR_CLKMODE0	(1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK	0x1f
+
+#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
+#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
 
 static int _clk_enable(struct clk *clk)
 {
@@ -1004,6 +1235,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+			MX21_INT_GPT1);
 	return 0;
 }

arch/arm/mach-mx2/clock_imx27.c

@@ -29,21 +29,23 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 
+#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
 /* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
 
 #define CCM_CSCR_UPDATE_DIS	(1 << 31)
 #define CCM_CSCR_SSI2		(1 << 23)
@@ -755,7 +757,8 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+			MX27_INT_GPT1);
 
 	return 0;
 }

arch/arm/mach-mx2/cpu_imx27.c

@@ -39,7 +39,8 @@ static void query_silicon_parameter(void)
 	 * the silicon revision very early we read it here to
 	 * avoid any further hooks
 	*/
-	val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+				+ SYS_CHIP_ID));
 
 	cpu_silicon_rev = (int)(val >> 28);
 	cpu_partnumber = (int)((val >> 12) & 0xFFFF);

arch/arm/mach-mx2/devices.h

 extern struct platform_device mxc_gpt1;
 extern struct platform_device mxc_gpt2;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
+#endif
 extern struct platform_device mxc_wdt;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
@@ -11,12 +13,19 @@ extern struct platform_device mxc_uart_device3;
 extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
+#ifdef CONFIG_MACH_MX21
+extern struct platform_device imx21_nand_device;
+#endif
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device imx27_nand_device;
+#endif
 extern struct platform_device mxc_fb_device;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_pwm_device;
 extern struct platform_device mxc_i2c_device0;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_i2c_device1;
+#endif
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
@@ -25,6 +34,8 @@ extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_spi_device2;
+#endif
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;

arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c

@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>

arch/arm/mach-mx2/eukrea_cpuimx27.c → arch/arm/mach-mx2/mach-cpuimx27.c

@@ -36,7 +36,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
 
@@ -142,28 +142,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
 		.irq = IRQ_GPIOB(23),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
 		.irq = IRQ_GPIOB(22),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
 		.irq = IRQ_GPIOB(27),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
 		.irq = IRQ_GPIOB(30),
 		.uartclk = 14745600,
 		.regshift = 1,
@@ -189,7 +189,8 @@ static void __init eukrea_cpuimx27_init(void)
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 
-	mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+	mxc_register_device(&imx27_nand_device,
+			&eukrea_cpuimx27_nand_board_info);
 
 	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
@@ -224,9 +225,9 @@ static struct sys_timer eukrea_cpuimx27_timer = {
 };
 
 MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = eukrea_cpuimx27_init,

arch/arm/mach-mx2/mx27lite.c → arch/arm/mach-mx2/mach-imx27lite.c

@@ -27,7 +27,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27lite.h>
 
 #include "devices.h"
@@ -85,9 +85,9 @@ static struct sys_timer mx27lite_timer = {
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27lite_init,

arch/arm/mach-mx2/mx21ads.c → arch/arm/mach-mx2/mach-mx21ads.c

@@ -30,7 +30,7 @@
 #include <asm/mach/map.h>
 #include <mach/imx-uart.h>
 #include <mach/imxfb.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
 #include <mach/board-mx21ads.h>
@@ -118,8 +118,8 @@ static struct physmap_flash_data mx21ads_flash_data = {
 };
 
 static struct resource mx21ads_flash_resource = {
-	.start = CS0_BASE_ADDR,
-	.end = CS0_BASE_ADDR + 0x02000000 - 1,
+	.start = MX21_CS0_BASE_ADDR,
+	.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -242,7 +242,7 @@ static struct map_desc mx21ads_io_desc[] __initdata = {
 	 */
 	{
 		.virtual = MX21ADS_MMIO_BASE_ADDR,
-		.pfn = __phys_to_pfn(CS1_BASE_ADDR),
+		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
 		.length = MX21ADS_MMIO_SIZE,
 		.type = MT_DEVICE,
 	},
@@ -268,7 +268,7 @@ static void __init mx21ads_board_init(void)
 	mxc_register_device(&mxc_uart_device3, &uart_pdata);
 	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
 	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
-	mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+	mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
@@ -284,9 +284,9 @@ static struct sys_timer mx21ads_timer = {
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX21_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX21_PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
 	.init_irq       = mx21_init_irq,
 	.init_machine   = mx21ads_board_init,

arch/arm/mach-mx2/mx27pdk.c → arch/arm/mach-mx2/mach-mx27_3ds.c

@@ -26,7 +26,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27pdk.h>
 
 #include "devices.h"
@@ -85,9 +85,9 @@ static struct sys_timer mx27pdk_timer = {
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27pdk_init,

arch/arm/mach-mx2/mx27ads.c → arch/arm/mach-mx2/mach-mx27ads.c

@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27ads.h>
 #include <mach/mxc_nand.h>
 #include <mach/i2c.h>
@@ -290,7 +290,7 @@ static void __init mx27ads_board_init(void)
 	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
 	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
-	mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, mx27ads_i2c_devices,
@@ -320,7 +320,7 @@ static struct sys_timer mx27ads_timer = {
 static struct map_desc mx27ads_io_desc[] __initdata = {
 	{
 		.virtual = PBC_BASE_ADDRESS,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
+		.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
 		.length = SZ_1M,
 		.type = MT_DEVICE,
 	},
@@ -334,9 +334,9 @@ static void __init mx27ads_map_io(void)
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27ads_board_init,

arch/arm/mach-mx2/mxt_td60.c → arch/arm/mach-mx2/mach-mxt_td60.c

@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
 #include <mach/i2c.h>
 #include <linux/i2c/pca953x.h>
@@ -257,7 +257,7 @@ static void __init mxt_td60_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,
 				ARRAY_SIZE(mxt_td60_i2c_devices));
@@ -284,9 +284,9 @@ static struct sys_timer mxt_td60_timer = {
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
-	.phys_io	= AIPI_BASE_ADDR,
-	.io_pg_offst	= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.phys_io	= MX27_AIPI_BASE_ADDR,
+	.io_pg_offst	= ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= MX27_PHYS_OFFSET + 0x100,
 	.map_io		= mx27_map_io,
 	.init_irq	= mx27_init_irq,
 	.init_machine	= mxt_td60_board_init,

arch/arm/mach-mx2/pca100.c → arch/arm/mach-mx2/mach-pca100.c

@@ -25,25 +25,36 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/irq.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/i2c.h>
 #include <asm/mach/time.h>
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 #include <mach/spi.h>
 #endif
 #include <mach/imx-uart.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
 #include <mach/mxc_nand.h>
 #include <mach/irqs.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
+#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
+#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
+
 static int pca100_pins[] = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
@@ -92,6 +103,34 @@ static int pca100_pins[] = {
 	PD29_PF_CSPI1_SCLK,
 	PD30_PF_CSPI1_MISO,
 	PD31_PF_CSPI1_MOSI,
+	/* OTG */
+	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* USBH2 */
+	USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -157,6 +196,37 @@ static struct spi_imx_master pca100_spi_0_data = {
 };
 #endif
 
+static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
+	gpio_set_value(GPIO_PORTC + 20, 1);
+	udelay(2);
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	msleep(2);
+}
+
+static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);  /* FS */
+	gpio_set_value(GPIO_PORTC + 20, 0);
+	mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT);  /* TX */
+	gpio_set_value(GPIO_PORTC + 22, 0);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT);  /* reset */
+	gpio_set_value(GPIO_PORTC + 28, 0);
+	udelay(10);
+	gpio_set_value(GPIO_PORTC + 28, 1);
+	mxc_gpio_mode(PC20_PF_SSI1_FS);
+	mxc_gpio_mode(PC22_PF_SSI1_TXD);
+	msleep(2);
+}
+
+static struct imx_ssi_platform_data pca100_ssi_pdata = {
+	.ac97_reset		= pca100_ac97_cold_reset,
+	.ac97_warm_reset	= pca100_ac97_warm_reset,
+	.flags			= IMX_SSI_USE_AC97,
+};
+
 static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
 		void *data)
 {
@@ -182,21 +252,79 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pca100_sdhc2_exit,
 };
 
+static int otg_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(OTG_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data otg_pdata = {
+	.init	= otg_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static int usbh2_phy_init(struct platform_device *pdev)
+{
+	gpio_set_value(USBH2_PHY_CS_GPIO, 0);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= usbh2_phy_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pca100_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", pca100_otg_mode);
+
 static void __init pca100_init(void)
 {
 	int ret;
 
+	/* SSI unit */
+	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(3) |
+				  MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+				  MXC_AUDMUX_V1_PCR_RXDSEL(3));
+	mxc_audmux_v1_configure_port(3,
+				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+				  MXC_AUDMUX_V1_PCR_TFCSEL(0) |
+				  MXC_AUDMUX_V1_PCR_TFSDIR |
+				  MXC_AUDMUX_V1_PCR_RXDSEL(0));
+
 	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
 			ARRAY_SIZE(pca100_pins), "PCA100");
 	if (ret)
 		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
 
+	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
 	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 
-	mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pca100_i2c_devices,
@@ -220,6 +348,29 @@ static void __init pca100_init(void)
 	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
 #endif
 
+	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
+	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
+	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
+	gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host) {
+		gpio_set_value(OTG_PHY_CS_GPIO, 0);
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+	}
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
@@ -233,9 +384,9 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = pca100_init,

arch/arm/mach-mx2/pcm038.c → arch/arm/mach-mx2/mach-pcm038.c

@@ -36,10 +36,12 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
 #include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
@@ -96,6 +98,19 @@ static int pcm038_pins[] = {
 	PC17_PF_SSI4_RXD,
 	PC18_PF_SSI4_TXD,
 	PC19_PF_SSI4_CLK,
+	/* USB host */
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
 };
 
 /*
@@ -108,8 +123,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
 };
 
 static struct resource pcm038_sram_resource = {
-	.start = CS1_BASE_ADDR,
-	.end   = CS1_BASE_ADDR + 512 * 1024 - 1,
+	.start = MX27_CS1_BASE_ADDR,
+	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -173,9 +188,7 @@ static struct platform_device *platform_devices[] __initdata = {
  * setup other stuffs to access the sram. */
 static void __init pcm038_init_sram(void)
 {
-	__raw_writel(0x0000d843, CSCR_U(1));
-	__raw_writel(0x22252521, CSCR_L(1));
-	__raw_writel(0x22220a00, CSCR_A(1));
+	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
 }
 
 static struct imxi2c_platform_data pcm038_i2c_1_data = {
@@ -279,6 +292,11 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = {
 	}
 };
 
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
 static void __init pcm038_init(void)
 {
 	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -291,7 +309,7 @@ static void __init pcm038_init(void)
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
 
 	mxc_gpio_mode(PE16_AF_OWIRE);
-	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
+	mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
 
 	/* only the i2c master 1 is used on this CPU card */
 	i2c_register_board_info(1, pcm038_i2c_devices,
@@ -311,6 +329,8 @@ static void __init pcm038_init(void)
 	spi_register_board_info(pcm038_spi_board_info,
 				ARRAY_SIZE(pcm038_spi_board_info));
 
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -328,9 +348,9 @@ static struct sys_timer pcm038_timer = {
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,
 	.init_machine   = pcm038_init,

arch/arm/mach-mx2/mm-imx21.c

+/*
+ * arch/arm/mach-mx2/mm-imx21.c
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/* MX21 memory map definition */
+static struct map_desc imx21_io_desc[] __initdata = {
+	/*
+	 * this fixed mapping covers:
+	 * - AIPI1
+	 * - AIPI2
+	 * - AITC
+	 * - ROM Patch
+	 * - and some reserved space
+	 */
+	{
+		.virtual = MX21_AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
+		.length = MX21_AIPI_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - CSI
+	 * - ATA
+	 */
+	{
+		.virtual = MX21_SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
+		.length = MX21_SAHB1_SIZE,
+		.type = MT_DEVICE
+	},
+	/*
+	 * this fixed mapping covers:
+	 * - EMI
+	 */
+	{
+		.virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
+		.length = MX21_X_MEMC_SIZE,
+		.type = MT_DEVICE
+	},
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+void __init mx21_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
+
+	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
+}
+
+void __init mx21_init_irq(void)
+{
+	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
+}

arch/arm/mach-mx2/generic.c → arch/arm/mach-mx2/mm-imx27.c

 /*
- * generic.c
+ * arch/arm/mach-mx2/mm-imx27.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -26,7 +26,7 @@
 #include <asm/mach/map.h>
 
 /* MX27 memory map definition */
-static struct map_desc mxc_io_desc[] __initdata = {
+static struct map_desc imx27_io_desc[] __initdata = {
 	/*
 	 * this fixed mapping covers:
 	 * - AIPI1
@@ -36,9 +36,9 @@ static struct map_desc mxc_io_desc[] __initdata = {
 	 * - and some reserved space
 	 */
 	{
-		.virtual = AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(AIPI_BASE_ADDR),
-		.length = AIPI_SIZE,
+		.virtual = MX27_AIPI_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
+		.length = MX27_AIPI_SIZE,
 		.type = MT_DEVICE
 	},
 	/*
@@ -47,9 +47,9 @@ static struct map_desc mxc_io_desc[] __initdata = {
 	 * - ATA
 	 */
 	{
-		.virtual = SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
-		.length = SAHB1_SIZE,
+		.virtual = MX27_SAHB1_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
+		.length = MX27_SAHB1_SIZE,
 		.type = MT_DEVICE
 	},
 	/*
@@ -57,11 +57,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
 	 * - EMI
 	 */
 	{
-		.virtual = X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
-		.length = X_MEMC_SIZE,
+		.virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
+		.length = MX27_X_MEMC_SIZE,
 		.type = MT_DEVICE
-	}
+	},
 };
 
 /*
@@ -69,29 +69,15 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual
  * memory map for the IO modules.
  */
-void __init mx21_map_io(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX21);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
-
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
 void __init mx27_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
 
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
 }
 
 void __init mx27_init_irq(void)
 {
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
 }
-
-void __init mx21_init_irq(void)
-{
-	mx27_init_irq();
-}
-

arch/arm/mach-mx2/pcm970-baseboard.c

@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
@@ -190,8 +190,8 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 
 static struct resource pcm970_sja1000_resources[] = {
 	{
-		.start   = CS4_BASE_ADDR,
-		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.start   = MX27_CS4_BASE_ADDR,
+		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
 		.flags   = IORESOURCE_MEM,
 	}, {
 		.start   = IRQ_GPIOE(19),

arch/arm/mach-mx2/serial.c

@@ -26,12 +26,12 @@
 
 static struct resource uart0[] = {
 	{
-		.start = UART1_BASE_ADDR,
-		.end = UART1_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART1_BASE_ADDR,
+		.end = MX2x_UART1_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART1,
-		.end = MXC_INT_UART1,
+		.start = MX2x_INT_UART1,
+		.end = MX2x_INT_UART1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -45,12 +45,12 @@ struct platform_device mxc_uart_device0 = {
 
 static struct resource uart1[] = {
 	{
-		.start = UART2_BASE_ADDR,
-		.end = UART2_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART2_BASE_ADDR,
+		.end = MX2x_UART2_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART2,
-		.end = MXC_INT_UART2,
+		.start = MX2x_INT_UART2,
+		.end = MX2x_INT_UART2,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -64,12 +64,12 @@ struct platform_device mxc_uart_device1 = {
 
 static struct resource uart2[] = {
 	{
-		.start = UART3_BASE_ADDR,
-		.end = UART3_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART3_BASE_ADDR,
+		.end = MX2x_UART3_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART3,
-		.end = MXC_INT_UART3,
+		.start = MX2x_INT_UART3,
+		.end = MX2x_INT_UART3,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -83,12 +83,12 @@ struct platform_device mxc_uart_device2 = {
 
 static struct resource uart3[] = {
 	{
-		.start = UART4_BASE_ADDR,
-		.end = UART4_BASE_ADDR + 0x0B5,
+		.start = MX2x_UART4_BASE_ADDR,
+		.end = MX2x_UART4_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART4,
-		.end = MXC_INT_UART4,
+		.start = MX2x_INT_UART4,
+		.end = MX2x_INT_UART4,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -103,12 +103,12 @@ struct platform_device mxc_uart_device3 = {
 #ifdef CONFIG_MACH_MX27
 static struct resource uart4[] = {
 	{
-		.start = UART5_BASE_ADDR,
-		.end = UART5_BASE_ADDR + 0x0B5,
+		.start = MX27_UART5_BASE_ADDR,
+		.end = MX27_UART5_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART5,
-		.end = MXC_INT_UART5,
+		.start = MX27_INT_UART5,
+		.end = MX27_INT_UART5,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -122,12 +122,12 @@ struct platform_device mxc_uart_device4 = {
 
 static struct resource uart5[] = {
 	{
-		.start = UART6_BASE_ADDR,
-		.end = UART6_BASE_ADDR + 0x0B5,
+		.start = MX27_UART6_BASE_ADDR,
+		.end = MX27_UART6_BASE_ADDR + 0x0B5,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_UART6,
-		.end = MXC_INT_UART6,
+		.start = MX27_INT_UART6,
+		.end = MX27_INT_UART6,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/arm/mach-mx25/Kconfig

@@ -3,7 +3,6 @@ if ARCH_MX25
 comment "MX25 platforms:"
 
 config MACH_MX25_3DS
-	select ARCH_MXC_IOMUX_V3
 	bool "Support MX25PDK (3DS) Platform"
 
 endif

arch/arm/mach-mx25/Makefile

 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
-obj-$(CONFIG_MACH_MX25_3DS)	+= mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25pdk.o

arch/arm/mach-mx25/clock.c

@@ -124,6 +124,11 @@ static unsigned long get_rate_gpt(struct clk *clk)
 	return get_rate_per(5);
 }
 
+static unsigned long get_rate_lcdc(struct clk *clk)
+{
+	return get_rate_per(7);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
 	return 48000000; /* FIXME */
@@ -167,6 +172,8 @@ DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
+DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,	 NULL, NULL);
+DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,	 NULL, &lcdc_ahb_clk);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
 DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
@@ -182,6 +189,8 @@ DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
 DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
+DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(lcdc_clk,	 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -214,6 +223,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 };
 
 int __init mx25_clocks_init(void)
@@ -231,6 +242,9 @@ int __init mx25_clocks_init(void)
 	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
 	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
 
+	/* Clock source for lcdc is upll */
+	__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;

arch/arm/mach-mx25/devices.c

@@ -438,3 +438,65 @@ struct platform_device mx25_fec_device = {
 	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
 	.resource	= mx25_fec_resources,
 };
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= MX25_NFC_BASE_ADDR,
+		.end	= MX25_NFC_BASE_ADDR + 0x1fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_NANDFC,
+		.end	= MX25_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name		= "mxc_nand",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mxc_nand_resources),
+	.resource	= mxc_nand_resources,
+};
+
+static struct resource mx25_rtc_resources[] = {
+	{
+		.start	= MX25_DRYICE_BASE_ADDR,
+		.end	= MX25_DRYICE_BASE_ADDR + 0x40,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_DRYICE,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mx25_rtc_device = {
+	.name	= "imxdi_rtc",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_rtc_resources),
+	.resource	= mx25_rtc_resources,
+};
+
+static struct resource mx25_fb_resources[] = {
+	{
+		.start	= MX25_LCDC_BASE_ADDR,
+		.end	= MX25_LCDC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_LCDC,
+		.end	= MX25_INT_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_fb_device = {
+	.name		= "imx-fb",
+	.id		= 0,
+	.resource	= mx25_fb_resources,
+	.num_resources	= ARRAY_SIZE(mx25_fb_resources),
+	.dev		= {
+		.coherent_dma_mask = 0xFFFFFFFF,
+	},
+};

arch/arm/mach-mx25/devices.h

@@ -18,3 +18,6 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx25_fec_device;
+extern struct platform_device mxc_nand_device;
+extern struct platform_device mx25_rtc_device;
+extern struct platform_device mx25_fb_device;

arch/arm/mach-mx25/mx25pdk.c → arch/arm/mach-mx25/mach-mx25pdk.c

@@ -35,8 +35,9 @@
 #include <mach/imx-uart.h>
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
 #include "devices.h"
-#include <mach/iomux.h>
+#include <mach/iomux-mx25.h>
 
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
@@ -54,6 +55,31 @@ static struct pad_desc mx25pdk_pads[] = {
 	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
 	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
 	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+
+	/* LCD */
+	MX25_PAD_LD0__LD0,
+	MX25_PAD_LD1__LD1,
+	MX25_PAD_LD2__LD2,
+	MX25_PAD_LD3__LD3,
+	MX25_PAD_LD4__LD4,
+	MX25_PAD_LD5__LD5,
+	MX25_PAD_LD6__LD6,
+	MX25_PAD_LD7__LD7,
+	MX25_PAD_LD8__LD8,
+	MX25_PAD_LD9__LD9,
+	MX25_PAD_LD10__LD10,
+	MX25_PAD_LD11__LD11,
+	MX25_PAD_LD12__LD12,
+	MX25_PAD_LD13__LD13,
+	MX25_PAD_LD14__LD14,
+	MX25_PAD_LD15__LD15,
+	MX25_PAD_GPIO_E__LD16,
+	MX25_PAD_GPIO_F__LD17,
+	MX25_PAD_HSYNC__HSYNC,
+	MX25_PAD_VSYNC__VSYNC,
+	MX25_PAD_LSCLK__LSCLK,
+	MX25_PAD_OE_ACD__OE_ACD,
+	MX25_PAD_CONTRAST__CONTRAST,
 };
 
 static struct fec_platform_data mx25_fec_pdata = {
@@ -77,6 +103,40 @@ static void __init mx25pdk_fec_reset(void)
 	gpio_set_value(FEC_RESET_B_GPIO, 1);
 }
 
+static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+	.width		= 1,
+	.hw_ecc		= 1,
+	.flash_bbt	= 1,
+};
+
+static struct imx_fb_videomode mx25pdk_modes[] = {
+	{
+		.mode	= {
+			.name		= "CRT-VGA",
+			.refresh	= 60,
+			.xres		= 640,
+			.yres		= 480,
+			.pixclock	= 39683,
+			.left_margin	= 45,
+			.right_margin	= 114,
+			.upper_margin	= 33,
+			.lower_margin	= 11,
+			.hsync_len	= 1,
+			.vsync_len	= 1,
+		},
+		.bpp	= 16,
+		.pcr	= 0xFA208B80,
+	},
+};
+
+static struct imx_fb_platform_data mx25pdk_fb_pdata = {
+	.mode		= mx25pdk_modes,
+	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
 static void __init mx25pdk_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -84,6 +144,9 @@ static void __init mx25pdk_init(void)
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
+	mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
+	mxc_register_device(&mx25_rtc_device, NULL);
+	mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
 
 	mx25pdk_fec_reset();
 	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
@@ -102,7 +165,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.phys_io	= MX25_AIPS1_BASE_ADDR,
 	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.boot_params    = MX25_PHYS_OFFSET + 0x100,
 	.map_io         = mx25_map_io,
 	.init_irq       = mx25_init_irq,
 	.init_machine   = mx25pdk_init,

arch/arm/mach-mx3/Kconfig

@@ -34,6 +34,7 @@ config MACH_MX31ADS_WM1133_EV1
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -86,6 +87,7 @@ config MACH_QONG
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
 	select ARCH_MX35
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
 	  specific configurations for the board and its peripherals.

arch/arm/mach-mx3/Makefile

@@ -5,18 +5,22 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
+CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_ARCH_MX31)		+= clock-imx31.o iomux-imx31.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
-obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
-				   mx31moboard-marxbot.o
-obj-$(CONFIG_MACH_QONG)		+= qong.o
-obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
-obj-$(CONFIG_MACH_KZM_ARM11_01)	+= kzmarm11.o
+obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037)	+= mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS)	+= mach-mx31_3ds.o
+CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
+				   mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
+obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o

arch/arm/mach-mx3/clock.c → arch/arm/mach-mx3/clock-imx31.c

@@ -618,14 +618,15 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	mx31_read_cpu_rev();
 
-	if (mx31_revision() >= CHIP_REV_2_0) {
+	if (mx31_revision() >= MX31_CHIP_REV_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */
 		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
 		__raw_writel(reg, MXC_CCM_PMCR1);
 	}
 
-	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+			MX31_INT_GPT);
 
 	return 0;
 }

arch/arm/mach-mx3/clock-imx35.c

@@ -28,7 +28,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 
-#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
+#define CCM_BASE	MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
 
 #define CCM_CCMR        0x00
 #define CCM_PDR0        0x04
@@ -504,7 +504,8 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&gpt_clk,
+			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
 
 	return 0;
 }

arch/arm/mach-mx3/cpu.c

@@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void)
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
-	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev) {

arch/arm/mach-mx3/crm_regs.h

@@ -24,7 +24,7 @@
 #define CKIH_CLK_FREQ_27MHZ     27000000
 #define CKIL_CLK_FREQ           32768
 
-#define MXC_CCM_BASE		IO_ADDRESS(CCM_BASE_ADDR)
+#define MXC_CCM_BASE		MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
 
 /* Register addresses */
 #define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)

arch/arm/mach-mx3/iomux.c → arch/arm/mach-mx3/iomux-imx31.c

@@ -29,7 +29,7 @@
 /*
  * IOMUX register (base) addresses
  */
-#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUX_BASE	MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
 #define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
 #define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
 #define IOMUXGPR	(IOMUX_BASE + 0x008)

arch/arm/mach-mx3/armadillo5x0.c → arch/arm/mach-mx3/mach-armadillo5x0.c

@@ -182,8 +182,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
 
 static struct resource armadillo5x0_nor_flash_resource = {
 	.flags		= IORESOURCE_MEM,
-	.start		= CS0_BASE_ADDR,
-	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+	.start		= MX31_CS0_BASE_ADDR,
+	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
 };
 
 static struct platform_device armadillo5x0_nor_flash = {
@@ -311,8 +311,8 @@ static struct imxmmc_platform_data sdhc_pdata = {
  */
 static struct resource armadillo5x0_smc911x_resources[] = {
 	{
-		.start	= CS3_BASE_ADDR,
-		.end	= CS3_BASE_ADDR + SZ_32M - 1,
+		.start	= MX31_CS3_BASE_ADDR,
+		.end	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
@@ -406,9 +406,9 @@ static struct sys_timer armadillo5x0_timer = {
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
 	.timer		= &armadillo5x0_timer,

arch/arm/mach-mx3/kzmarm11.c → arch/arm/mach-mx3/mach-kzm_arm11_01.c

@@ -46,13 +46,18 @@
 
 #include "devices.h"
 
+#define KZM_ARM11_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MX31_CS4) ?:					\
+	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
+	MX31_IO_ADDRESS(x))
+
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
  */
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= IO_ADDRESS(KZM_ARM11_16550),
+		.membase	= KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
 		.mapbase	= KZM_ARM11_16550,
 		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
 		.irqflags	= IRQ_TYPE_EDGE_RISING,
@@ -102,9 +107,9 @@ static int __init kzm_init_ext_uart(void)
 	/*
 	 * Unmask UART interrupt
 	 */
-	tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+	tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
 	tmp |= 0x2;
-	__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+	__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
 
 	return platform_device_register(&serial_device);
 }
@@ -128,8 +133,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = {
 
 static struct resource kzm_smsc9118_resources[] = {
 	{
-		.start	= CS5_BASE_ADDR,
-		.end	= CS5_BASE_ADDR + SZ_128K - 1,
+		.start	= MX31_CS5_BASE_ADDR,
+		.end	= MX31_CS5_BASE_ADDR + SZ_128K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -222,15 +227,15 @@ static void __init kzm_board_init(void)
  */
 static struct map_desc kzm_io_desc[] __initdata = {
 	{
-		.virtual	= CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
-		.length		= CS4_SIZE,
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= CS5_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS5_BASE_ADDR),
-		.length		= CS5_SIZE,
+		.virtual	= MX31_CS5_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length		= MX31_CS5_SIZE,
 		.type		= MT_DEVICE
 	},
 };
@@ -258,9 +263,9 @@ static struct sys_timer kzm_timer = {
  * initialize __mach_desc_KZM_ARM11_01 data structure.
  */
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = kzm_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = kzm_board_init,

arch/arm/mach-mx3/mx31pdk.c → arch/arm/mach-mx3/mach-mx31_3ds.c

@@ -211,9 +211,9 @@ static int __init mx31pdk_init_expio(void)
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
 	{
-		.virtual = CS5_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
-		.length = CS5_SIZE,
+		.virtual = MX31_CS5_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length = MX31_CS5_SIZE,
 		.type = MT_DEVICE,
 	},
 };
@@ -256,9 +256,9 @@ static struct sys_timer mx31pdk_timer = {
  */
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31pdk_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,

arch/arm/mach-mx3/mx31ads.c → arch/arm/mach-mx3/mach-mx31ads.c

@@ -60,7 +60,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
-		.mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
 		.irq      = EXPIO_INT_XUART_INTA,
 		.uartclk  = 14745600,
 		.regshift = 0,
@@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
 	}, {
 		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
-		.mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
 		.irq      = EXPIO_INT_XUART_INTB,
 		.uartclk  = 14745600,
 		.regshift = 0,
@@ -309,12 +309,8 @@ static struct regulator_init_data ldo1_data = {
 };
 
 static struct regulator_consumer_supply ldo2_consumers[] = {
-	{
-		.supply = "AVDD",
-	},
-	{
-		.supply = "HPVDD",
-	},
+	{ .supply = "AVDD", .dev_name = "1-001a" },
+	{ .supply = "HPVDD", .dev_name = "1-001a" },
 };
 
 /* CODEC and SIM */
@@ -385,8 +381,6 @@ static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
 
 static int mx31_wm8350_init(struct wm8350 *wm8350)
 {
-	int i;
-
 	wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
 			   WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
 			   WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
@@ -422,10 +416,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 			   WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
 			   WM8350_GPIO_DEBOUNCE_OFF);
 
-	/* Fix up for our own supplies. */
-	for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
-		ldo2_consumers[i].dev = wm8350->dev;
-
 	wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
 	wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
 	wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
@@ -493,14 +483,27 @@ static void mxc_init_i2c(void)
 }
 #endif
 
+static unsigned int ssi_pins[] = {
+	MX31_PIN_SFS5__SFS5,
+	MX31_PIN_SCK5__SCK5,
+	MX31_PIN_SRXD5__SRXD5,
+	MX31_PIN_STXD5__STXD5,
+};
+
+static void mxc_init_audio(void)
+{
+	mxc_register_device(&imx_ssi_device0, NULL);
+	mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
+}
+
 /*!
  * This structure defines static mappings for the i.MX31ADS board.
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
-		.length		= CS4_SIZE / 2,
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE / 2,
 		.type		= MT_DEVICE
 	},
 };
@@ -528,6 +531,7 @@ static void __init mxc_board_init(void)
 	mxc_init_extuart();
 	mxc_init_imx_uart();
 	mxc_init_i2c();
+	mxc_init_audio();
 }
 
 static void __init mx31ads_timer_init(void)
@@ -545,9 +549,9 @@ static struct sys_timer mx31ads_timer = {
  */
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31ads_map_io,
 	.init_irq       = mx31ads_init_irq,
 	.init_machine   = mxc_board_init,

arch/arm/mach-mx3/mx31lilly.c → arch/arm/mach-mx3/mach-mx31lilly.c

@@ -57,8 +57,8 @@
 
 static struct resource smsc91x_resources[] = {
 	{
-		.start	= CS4_BASE_ADDR,
-		.end	= CS4_BASE_ADDR + 0xffff,
+		.start	= MX31_CS4_BASE_ADDR,
+		.end	= MX31_CS4_BASE_ADDR + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -195,9 +195,9 @@ static struct sys_timer mx31lilly_timer = {
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= PHYS_OFFSET + 0x100,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params	= MX3x_PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,
 	.init_machine	= mx31lilly_board_init,

arch/arm/mach-mx3/mx31lite.c → arch/arm/mach-mx3/mach-mx31lite.c

@@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = {
 
 static struct resource smsc911x_resources[] = {
 	{
-		.start		= CS4_BASE_ADDR,
-		.end		= CS4_BASE_ADDR + 0x100,
+		.start		= MX31_CS4_BASE_ADDR,
+		.end		= MX31_CS4_BASE_ADDR + 0x100,
 		.flags		= IORESOURCE_MEM,
 	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
@@ -214,9 +214,9 @@ static struct platform_device physmap_flash_device = {
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = CS4_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
-		.length = CS4_SIZE,
+		.virtual = MX31_CS4_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length = MX31_CS4_SIZE,
 		.type = MT_DEVICE
 	}
 };
@@ -287,9 +287,9 @@ struct sys_timer mx31lite_timer = {
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = PHYS_OFFSET + 0x100,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
 	.map_io         = mx31lite_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,