ASoC: rsnd: setup BRGCKR/BRRA/BRRB when starting

Current rsnd driver setups BRGCKR/BRRA/BRRB when .probe timing.
But it breaks sound after Suspend/Resume. These should be setups
every start timing.
This patch is tested on R-Car Gen3 Salvator-X board
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/sh/rcar/adg.c

@@ -34,6 +34,9 @@ struct rsnd_adg {
 	struct clk_onecell_data onecell;
 	struct rsnd_mod mod;
 	u32 flags;
+	u32 ckr;
+	u32 rbga;
+	u32 rbgb;
 
 	int rbga_rate_for_441khz; /* RBGA */
 	int rbgb_rate_for_48khz;  /* RBGB */
@@ -316,9 +319,11 @@ int rsnd_adg_ssi_clk_try_start(struct rsnd_mod *ssi_mod, unsigned int rate)
 	struct rsnd_priv *priv = rsnd_mod_to_priv(ssi_mod);
 	struct rsnd_adg *adg = rsnd_priv_to_adg(priv);
 	struct device *dev = rsnd_priv_to_dev(priv);
+	struct rsnd_mod *adg_mod = rsnd_mod_get(adg);
 	struct clk *clk;
 	int i;
 	u32 data;
+	u32 ckr = 0;
 	int sel_table[] = {
 		[CLKA] = 0x1,
 		[CLKB] = 0x2,
@@ -360,15 +365,14 @@ int rsnd_adg_ssi_clk_try_start(struct rsnd_mod *ssi_mod, unsigned int rate)
 	rsnd_adg_set_ssi_clk(ssi_mod, data);
 
 	if (!(adg_mode_flags(adg) & LRCLK_ASYNC)) {
-		struct rsnd_mod *adg_mod = rsnd_mod_get(adg);
-		u32 ckr = 0;
-
 		if (0 == (rate % 8000))
 			ckr = 0x80000000;
-
-		rsnd_mod_bset(adg_mod, BRGCKR, 0x80000000, ckr);
 	}
 
+	rsnd_mod_bset(adg_mod, BRGCKR, 0x80FF0000, adg->ckr | ckr);
+	rsnd_mod_write(adg_mod, BRRA,  adg->rbga);
+	rsnd_mod_write(adg_mod, BRRB,  adg->rbgb);
+
 	dev_dbg(dev, "ADG: %s[%d] selects 0x%x for %d\n",
 		rsnd_mod_name(ssi_mod), rsnd_mod_id(ssi_mod),
 		data, rate);
@@ -421,7 +425,6 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv,
 				struct rsnd_adg *adg)
 {
 	struct clk *clk;
-	struct rsnd_mod *adg_mod = rsnd_mod_get(adg);
 	struct device *dev = rsnd_priv_to_dev(priv);
 	struct device_node *np = dev->of_node;
 	u32 ckr, rbgx, rbga, rbgb;
@@ -546,9 +549,9 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv,
 		}
 	}
 
-	rsnd_mod_bset(adg_mod, BRGCKR, 0x80FF0000, ckr);
-	rsnd_mod_write(adg_mod, BRRA,  rbga);
-	rsnd_mod_write(adg_mod, BRRB,  rbgb);
+	adg->ckr = ckr;
+	adg->rbga = rbga;
+	adg->rbgb = rbgb;
 
 	for_each_rsnd_clkout(clk, adg, i)
 		dev_dbg(dev, "clkout %d : %p : %ld\n", i, clk, clk_get_rate(clk));