pata_imx: add devicetree support

Not much to do here, only the compatible entries have to be added.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Documentation/devicetree/bindings/ata/imx-pata.txt

+* Freescale i.MX PATA Controller
+
+Required properties:
+- compatible: "fsl,imx27-pata"
+- reg: Address range of the PATA Controller
+- interrupts: The interrupt of the PATA Controller
+- clocks: the clocks for the PATA Controller
+
+Example:
+
+	pata: pata@83fe0000 {
+		compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+		reg = <0x83fe0000 0x4000>;
+		interrupts = <70>;
+		clocks = <&clks 161>;
+		status = "disabled";
+	};

drivers/ata/pata_imx.c

@@ -230,11 +230,20 @@ static const struct dev_pm_ops pata_imx_pm_ops = {
 };
 #endif
 
+static const struct of_device_id imx_pata_dt_ids[] = {
+	{
+		.compatible = "fsl,imx27-pata",
+	}, {
+		/* sentinel */
+	}
+};
+
 static struct platform_driver pata_imx_driver = {
 	.probe		= pata_imx_probe,
 	.remove		= pata_imx_remove,
 	.driver = {
 		.name		= DRV_NAME,
+		.of_match_table	= imx_pata_dt_ids,
 		.owner		= THIS_MODULE,
 #ifdef CONFIG_PM
 		.pm		= &pata_imx_pm_ops,