Commit ba038546 authored by Keerthy's avatar Keerthy Committed by Viresh Kumar

opp: ti-opp-supply: Dynamically update u_volt_min

The voltage range (min, max) provided in the device tree is from
the data manual and is pretty big, catering to a wide range of devices.
On a i2c read/write failure the regulator_set_voltage_triplet function
falls back to set voltage between min and max. The min value from Device
Tree can be lesser than the optimal value and in that case that can lead
to a hang or crash. Hence set the u_volt_min dynamically to the optimal
voltage value.

Cc: 4.16+ <stable@vger.kernel.org> # v4.16+
Fixes: 9a835fa6 ("PM / OPP: Add ti-opp-supply driver")
Signed-off-by: default avatarKeerthy <j-keerthy@ti.com>
Acked-by: default avatarDave Gerlach <d-gerlach@ti.com>
Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
parent 65102238
...@@ -290,6 +290,9 @@ static int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data) ...@@ -290,6 +290,9 @@ static int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data)
vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data, vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data,
new_supply_vbb->u_volt); new_supply_vbb->u_volt);
if (new_supply_vdd->u_volt_min < vdd_uv)
new_supply_vdd->u_volt_min = vdd_uv;
/* Scaling up? Scale voltage before frequency */ /* Scaling up? Scale voltage before frequency */
if (freq > old_freq) { if (freq > old_freq) {
ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg, ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment