Skip to content

L
linux
Commit ba32ce95 authored by Boris Brezillon's avatar Boris Brezillon
Browse files
Options

mtd: maps: Merge gpio-addr-flash.c into physmap-core.c 

Controlling some MSB address lines using GPIOs is just a small
deviation from the generic physmap logic, and merging those two drivers
allows us to share most of the probe logic, which is a good thing.

Also, the gpio-addr-flash driver is unused since the removal of
the blackfin arch in v4.17, so we can safely remove the old driver
without risking breaking existing boards.
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: default avatarRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Tested-by: default avatarRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 3edf4b9f
Hide whitespace changes
Inline Side-by-side
Showing with 157 additions and 294 deletions
drivers/mtd/maps/Kconfig
View file @ ba32ce95
......@@ -94,6 +94,15 @@ config MTD_PHYSMAP_GEMINI
platforms, some detection and setting up parallel mode on the
external interface.
config MTD_PHYSMAP_GPIO_ADDR
bool "GPIO-assisted Flash Chip Support"
depends on MTD_PHYSMAP
depends on GPIOLIB || COMPILE_TEST
depends on MTD_COMPLEX_MAPPINGS
help
Extend the physmap driver to allow flashes to be partially
physically addressed and assisted by GPIOs.
config MTD_PMC_MSP_EVM
tristate "CFI Flash device mapped on PMC-Sierra MSP"
depends on PMC_MSP && MTD_CFI
......@@ -334,16 +343,6 @@ config MTD_PCMCIA_ANONYMOUS
If unsure, say N.
config MTD_GPIO_ADDR
tristate "GPIO-assisted Flash Chip Support"
depends on GPIOLIB || COMPILE_TEST
depends on MTD_COMPLEX_MAPPINGS
help
Map driver which allows flashes to be partially physically addressed
and assisted by GPIOs.
If compiled as a module, it will be called gpio-addr-flash.
config MTD_UCLINUX
bool "Generic uClinux RAM/ROM filesystem support"
depends on (MTD_RAM=y || MTD_ROM=y) && (!MMU || COLDFIRE)
......
drivers/mtd/maps/Makefile
View file @ ba32ce95
......@@ -43,6 +43,5 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
obj-$(CONFIG_MTD_VMU) += vmu-flash.o
obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o
obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
drivers/mtd/maps/gpio-addr-flash.c deleted 100644 → 0
View file @ 3edf4b9f
/*
* drivers/mtd/maps/gpio-addr-flash.c
*
* Handle the case where a flash device is mostly addressed using physical
* line and supplemented by GPIOs. This way you can hook up say a 8MiB flash
* to a 2MiB memory range and use the GPIOs to select a particular range.
*
* Copyright © 2000 Nicolas Pitre <nico@cam.org>
* Copyright © 2005-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Licensed under the GPL-2 or later.
*/
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
#define win_mask(x) ((BIT(x)) - 1)
#define DRIVER_NAME "gpio-addr-flash"
/**
* struct async_state - keep GPIO flash state
* @mtd: MTD state for this mapping
* @map: MTD map state for this flash
* @gpios: Struct containing the array of GPIO descriptors
* @gpio_values: cached GPIO values
* @win_order: dedicated memory size (if no GPIOs)
*/
struct async_state {
struct mtd_info *mtd;
struct map_info map;
struct gpio_descs *gpios;
unsigned int gpio_values;
unsigned int win_order;
};
#define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1)
/**
* gf_set_gpios() - set GPIO address lines to access specified flash offset
* @state: GPIO flash state
* @ofs: desired offset to access
*
* Rather than call the GPIO framework every time, cache the last-programmed
* value. This speeds up sequential accesses (which are by far the most common
* type).
*/
static void gf_set_gpios(struct async_state *state, unsigned long ofs)
{
int i;
ofs >>= state->win_order;
if (ofs == state->gpio_values)
return;
for (i = 0; i < state->gpios->ndescs; i++) {
if ((ofs & BIT(i)) == (state->gpio_values & BIT(i)))
continue;
gpiod_set_value(state->gpios->desc[i], !!(ofs & BIT(i)));
}
state->gpio_values = ofs;
}
/**
* gf_read() - read a word at the specified offset
* @map: MTD map state
* @ofs: desired offset to read
*/
static map_word gf_read(struct map_info *map, unsigned long ofs)
{
struct async_state *state = gf_map_info_to_state(map);
uint16_t word;
map_word test;
gf_set_gpios(state, ofs);
word = readw(map->virt + (ofs & win_mask(state->win_order)));
test.x[0] = word;
return test;
}
/**
* gf_copy_from() - copy a chunk of data from the flash
* @map: MTD map state
* @to: memory to copy to
* @from: flash offset to copy from
* @len: how much to copy
*
* The "from" region may straddle more than one window, so toggle the GPIOs for
* each window region before reading its data.
*/
static void gf_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
{
struct async_state *state = gf_map_info_to_state(map);
int this_len;
while (len) {
this_len = from & win_mask(state->win_order);
this_len = BIT(state->win_order) - this_len;
this_len = min_t(int, len, this_len);
gf_set_gpios(state, from);
memcpy_fromio(to,
map->virt + (from & win_mask(state->win_order)),
this_len);
len -= this_len;
from += this_len;
to += this_len;
}
}
/**
* gf_write() - write a word at the specified offset
* @map: MTD map state
* @ofs: desired offset to write
*/
static void gf_write(struct map_info *map, map_word d1, unsigned long ofs)
{
struct async_state *state = gf_map_info_to_state(map);
uint16_t d;
gf_set_gpios(state, ofs);
d = d1.x[0];
writew(d, map->virt + (ofs & win_mask(state->win_order)));
}
/**
* gf_copy_to() - copy a chunk of data to the flash
* @map: MTD map state
* @to: flash offset to copy to
* @from: memory to copy from
* @len: how much to copy
*
* See gf_copy_from() caveat.
*/
static void gf_copy_to(struct map_info *map, unsigned long to,
const void *from, ssize_t len)
{
struct async_state *state = gf_map_info_to_state(map);
int this_len;
while (len) {
this_len = to & win_mask(state->win_order);
this_len = BIT(state->win_order) - this_len;
this_len = min_t(int, len, this_len);
gf_set_gpios(state, to);
memcpy_toio(map->virt + (to & win_mask(state->win_order)),
from, len);
len -= this_len;
to += this_len;
from += this_len;
}
}
static const char * const part_probe_types[] = {
"cmdlinepart", "RedBoot", NULL };
/**
* gpio_flash_probe() - setup a mapping for a GPIO assisted flash
* @pdev: platform device
*
* The platform resource layout expected looks something like:
* struct mtd_partition partitions[] = { ... };
* struct physmap_flash_data flash_data = { ... };
* static struct gpiod_lookup_table addr_flash_gpios = {
* .dev_id = "gpio-addr-flash.0",
* .table = {
* GPIO_LOOKUP_IDX("gpio.0", 15, "addr", 0, GPIO_ACTIVE_HIGH),
* GPIO_LOOKUP_IDX("gpio.0", 16, "addr", 1, GPIO_ACTIVE_HIGH),
* );
* };
* gpiod_add_lookup_table(&addr_flash_gpios);
*
* struct resource flash_resource[] = {
* {
* .name = "cfi_probe",
* .start = 0x20000000,
* .end = 0x201fffff,
* .flags = IORESOURCE_MEM,
* },
* };
* struct platform_device flash_device = {
* .name = "gpio-addr-flash",
* .dev = { .platform_data = &flash_data, },
* .num_resources = ARRAY_SIZE(flash_resource),
* .resource = flash_resource,
* ...
* };
*/
static int gpio_flash_probe(struct platform_device *pdev)
{
struct physmap_flash_data *pdata;
struct resource *memory;
struct async_state *state;
pdata = dev_get_platdata(&pdev->dev);
memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!memory)
return -EINVAL;
state = devm_kzalloc(&pdev->dev, sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
state->gpios = devm_gpiod_get_array(&pdev->dev, "addr", GPIOD_OUT_LOW);
if (IS_ERR(state->gpios))
return PTR_ERR(state->gpios);
state->win_order = get_bitmask_order(resource_size(memory)) - 1;
state->map.name = DRIVER_NAME;
state->map.read = gf_read;
state->map.copy_from = gf_copy_from;
state->map.write = gf_write;
state->map.copy_to = gf_copy_to;
state->map.bankwidth = pdata->width;
state->map.size = BIT(state->win_order + state->gpios->ndescs);
state->map.virt = devm_ioremap_resource(&pdev->dev, memory);
if (IS_ERR(state->map.virt))
return PTR_ERR(state->map.virt);
state->map.phys = NO_XIP;
state->map.map_priv_1 = (unsigned long)state;
platform_set_drvdata(pdev, state);
dev_notice(&pdev->dev, "probing %d-bit flash bus\n",
state->map.bankwidth * 8);
state->mtd = do_map_probe(memory->name, &state->map);
if (!state->mtd)
return -ENXIO;
state->mtd->dev.parent = &pdev->dev;
mtd_device_parse_register(state->mtd, part_probe_types, NULL,
pdata->parts, pdata->nr_parts);
return 0;
}
static int gpio_flash_remove(struct platform_device *pdev)
{
struct async_state *state = platform_get_drvdata(pdev);
mtd_device_unregister(state->mtd);
map_destroy(state->mtd);
return 0;
}
static struct platform_driver gpio_flash_driver = {
.probe = gpio_flash_probe,
.remove = gpio_flash_remove,
.driver = {
.name = DRIVER_NAME,
},
};
module_platform_driver(gpio_flash_driver);
MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
MODULE_DESCRIPTION("MTD map driver for flashes addressed physically and with gpios");
MODULE_LICENSE("GPL");
drivers/mtd/maps/physmap-core.c
View file @ ba32ce95
......@@ -13,6 +13,14 @@
*
* Revised to handle newer style flash binding by:
* Copyright (C) 2007 David Gibson, IBM Corporation.
*
* GPIO address extension:
* Handle the case where a flash device is mostly addressed using physical
* line and supplemented by GPIOs. This way you can hook up say a 8MiB flash
* to a 2MiB memory range and use the GPIOs to select a particular range.
*
* Copyright © 2000 Nicolas Pitre <nico@cam.org>
* Copyright © 2005-2009 Analog Devices Inc.
*/
#include <linux/module.h>
......@@ -30,6 +38,7 @@
#include <linux/mtd/cfi_endian.h>
#include <linux/io.h>
#include <linux/of_device.h>
#include <linux/gpio/consumer.h>
#include "physmap-gemini.h"
#include "physmap-versatile.h"
......@@ -45,6 +54,9 @@ struct physmap_flash_info {
const char * const *part_types;
unsigned int nparts;
const struct mtd_partition *parts;
struct gpio_descs *gpios;
unsigned int gpio_values;
unsigned int win_order;
};
static int physmap_flash_remove(struct platform_device *dev)
......@@ -104,6 +116,119 @@ static void physmap_set_vpp(struct map_info *map, int state)
spin_unlock_irqrestore(&info->vpp_lock, flags);
}
#if IS_ENABLED(CONFIG_MTD_PHYSMAP_GPIO_ADDR)
static void physmap_set_addr_gpios(struct physmap_flash_info *info,
unsigned long ofs)
{
unsigned int i;
ofs >>= info->win_order;
if (info->gpio_values == ofs)
return;
for (i = 0; i < info->gpios->ndescs; i++) {
if ((BIT(i) & ofs) == (BIT(i) & info->gpio_values))
continue;
gpiod_set_value(info->gpios->desc[i], !!(BIT(i) & ofs));
}
}
#define win_mask(order) (BIT(order) - 1)
static map_word physmap_addr_gpios_read(struct map_info *map,
unsigned long ofs)
{
struct platform_device *pdev;
struct physmap_flash_info *info;
map_word mw;
u16 word;
pdev = (struct platform_device *)map->map_priv_1;
info = platform_get_drvdata(pdev);
physmap_set_addr_gpios(info, ofs);
word = readw(map->virt + (ofs & win_mask(info->win_order)));
mw.x[0] = word;
return mw;
}
static void physmap_addr_gpios_copy_from(struct map_info *map, void *buf,
unsigned long ofs, ssize_t len)
{
struct platform_device *pdev;
struct physmap_flash_info *info;
pdev = (struct platform_device *)map->map_priv_1;
info = platform_get_drvdata(pdev);
while (len) {
unsigned int winofs = ofs & win_mask(info->win_order);
unsigned int chunklen = min_t(unsigned int, len,
BIT(info->win_order) - winofs);
physmap_set_addr_gpios(info, ofs);
memcpy_fromio(buf, map->virt + winofs, chunklen);
len -= chunklen;
buf += chunklen;
ofs += chunklen;
}
}
static void physmap_addr_gpios_write(struct map_info *map, map_word mw,
unsigned long ofs)
{
struct platform_device *pdev;
struct physmap_flash_info *info;
u16 word;
pdev = (struct platform_device *)map->map_priv_1;
info = platform_get_drvdata(pdev);
physmap_set_addr_gpios(info, ofs);
word = mw.x[0];
writew(word, map->virt + (ofs & win_mask(info->win_order)));
}
static void physmap_addr_gpios_copy_to(struct map_info *map, unsigned long ofs,
const void *buf, ssize_t len)
{
struct platform_device *pdev;
struct physmap_flash_info *info;
pdev = (struct platform_device *)map->map_priv_1;
info = platform_get_drvdata(pdev);
while (len) {
unsigned int winofs = ofs & win_mask(info->win_order);
unsigned int chunklen = min_t(unsigned int, len,
BIT(info->win_order) - winofs);
physmap_set_addr_gpios(info, ofs);
memcpy_toio(map->virt + winofs, buf, chunklen);
len -= chunklen;
buf += chunklen;
ofs += chunklen;
}
}
static int physmap_addr_gpios_map_init(struct map_info *map)
{
map->phys = NO_XIP;
map->read = physmap_addr_gpios_read;
map->copy_from = physmap_addr_gpios_copy_from;
map->write = physmap_addr_gpios_write;
map->copy_to = physmap_addr_gpios_copy_to;
return 0;
}
#else
static int physmap_addr_gpios_map_init(struct map_info *map)
{
return -ENOTSUPP;
}
#endif
#if IS_ENABLED(CONFIG_MTD_PHYSMAP_OF)
static const struct of_device_id of_flash_match[] = {
{
......@@ -343,6 +468,16 @@ static int physmap_flash_probe(struct platform_device *dev)
platform_set_drvdata(dev, info);
info->gpios = devm_gpiod_get_array_optional(&dev->dev, "addr",
GPIOD_OUT_LOW);
if (IS_ERR(info->gpios))
return PTR_ERR(info->gpios);
if (info->gpios && info->nmaps > 1) {
dev_err(&dev->dev, "addr-gpios only supported for nmaps == 1\n");
return -EINVAL;
}
if (dev->dev.of_node)
err = physmap_flash_of_init(dev);
else
......@@ -369,10 +504,20 @@ static int physmap_flash_probe(struct platform_device *dev)
if (!info->maps[i].phys)
info->maps[i].phys = res->start;
info->maps[i].size = resource_size(res);
info->win_order = get_bitmask_order(resource_size(res)) - 1;
info->maps[i].size = BIT(info->win_order +
(info->gpios ?
info->gpios->ndescs : 0));
info->maps[i].map_priv_1 = (unsigned long)dev;
simple_map_init(&info->maps[i]);
if (info->gpios) {
err = physmap_addr_gpios_map_init(&info->maps[i]);
if (err)
goto err_out;
} else {
simple_map_init(&info->maps[i]);
}
probe_type = rom_probe_types;
if (!info->probe_type) {
......@@ -497,6 +642,7 @@ module_exit(physmap_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_AUTHOR("Vitaly Wool <vwool@ru.mvista.com>");
MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
MODULE_DESCRIPTION("Generic configurable MTD map driver");
/* legacy platform drivers can't hotplug or coldplg */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7