Commit baa9ae3c authored by Kevin Cernekee's avatar Kevin Cernekee Committed by David Woodhouse

mtd: m25p80: Add Spansion S25FL256S

These are 32MiB parts which use a slightly different 4-byte enable
sequence from Macronix.

Default to the Spansion 4-byte scheme in set_4byte(), as it is more
likely to be copied by other vendors.
Signed-off-by: default avatarKevin Cernekee <cernekee@gmail.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent aa084653
......@@ -56,6 +56,9 @@
#define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */
#define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */
/* Used for Spansion flashes only. */
#define OPCODE_BRWR 0x17 /* Bank register write */
/* Status Register bits. */
#define SR_WIP 1 /* Write in progress */
#define SR_WEL 2 /* Write enable latch */
......@@ -161,11 +164,18 @@ static inline int write_disable(struct m25p *flash)
/*
* Enable/disable 4-byte addressing mode.
*/
static inline int set_4byte(struct m25p *flash, int enable)
static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable)
{
u8 code = enable ? OPCODE_EN4B : OPCODE_EX4B;
return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
switch (JEDEC_MFR(jedec_id)) {
case CFI_MFR_MACRONIX:
flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B;
return spi_write(flash->spi, flash->command, 1);
default:
/* Spansion style */
flash->command[0] = OPCODE_BRWR;
flash->command[1] = enable << 7;
return spi_write(flash->spi, flash->command, 2);
}
}
/*
......@@ -688,6 +698,8 @@ static const struct spi_device_id m25p_ids[] = {
{ "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
{ "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SECT_4K) },
{ "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
{ "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, 0) },
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
{ "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) },
......@@ -921,7 +933,7 @@ static int __devinit m25p_probe(struct spi_device *spi)
/* enable 4-byte addressing if the device exceeds 16MiB */
if (flash->mtd.size > 0x1000000) {
flash->addr_width = 4;
set_4byte(flash, 1);
set_4byte(flash, info->jedec_id, 1);
} else
flash->addr_width = 3;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment