[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface

This patch adds V4L2 driver for Samsung S3C24XX/S3C64XX SoC series
camera interface. The driver exposes a subdev device node for CAMIF
pixel resolution and crop control and two video capture nodes - for
the "codec" and "preview" data paths. It has been tested on Mini2440
(s3c2440) and Mini6410 (s3c6410) board with gstreamer and mplayer.
Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Andrey Gusakov <dron0gus@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/platform/Kconfig

@@ -109,6 +109,18 @@ config VIDEO_OMAP3_DEBUG
 	---help---
 	  Enable debug messages on OMAP 3 camera controller driver.
 
+config VIDEO_S3C_CAMIF
+	tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
+	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+	depends on (PLAT_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
+	select VIDEOBUF2_DMA_CONTIG
+	---help---
+	  This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
+	  host interface (CAMIF).
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called s3c-camif.
+
 source "drivers/media/platform/soc_camera/Kconfig"
 source "drivers/media/platform/s5p-fimc/Kconfig"
 source "drivers/media/platform/s5p-tv/Kconfig"

drivers/media/platform/Makefile

@@ -27,6 +27,7 @@ obj-$(CONFIG_VIDEO_CODA) 		+= coda.o
 
 obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE)	+= m2m-deinterlace.o
 
+obj-$(CONFIG_VIDEO_S3C_CAMIF) 		+= s3c-camif/
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) 	+= s5p-fimc/
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG)	+= s5p-jpeg/
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC)	+= s5p-mfc/

drivers/media/platform/s3c-camif/Makefile

+# Makefile for s3c244x/s3c64xx CAMIF driver
+
+s3c-camif-objs := camif-core.o camif-capture.o camif-regs.o
+
+obj-$(CONFIG_VIDEO_S3C_CAMIF) += s3c-camif.o

include/media/s3c_camif.h

+/*
+ * s3c24xx/s3c64xx SoC series Camera Interface (CAMIF) driver
+ *
+ * Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef MEDIA_S3C_CAMIF_
+#define MEDIA_S3C_CAMIF_
+
+#include <linux/i2c.h>
+#include <media/v4l2-mediabus.h>
+
+/**
+ * struct s3c_camif_sensor_info - an image sensor description
+ * @i2c_board_info: pointer to an I2C sensor subdevice board info
+ * @clock_frequency: frequency of the clock the host provides to a sensor
+ * @mbus_type: media bus type
+ * @i2c_bus_num: i2c control bus id the sensor is attached to
+ * @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*)
+ * @use_field: 1 if parallel bus FIELD signal is used (only s3c64xx)
+ */
+struct s3c_camif_sensor_info {
+	struct i2c_board_info i2c_board_info;
+	unsigned long clock_frequency;
+	enum v4l2_mbus_type mbus_type;
+	u16 i2c_bus_num;
+	u16 flags;
+	u8 use_field;
+};
+
+struct s3c_camif_plat_data {
+	struct s3c_camif_sensor_info sensor;
+	int (*gpio_get)(void);
+	int (*gpio_put)(void);
+};
+
+/* Platform default helper functions */
+int s3c_camif_gpio_get(void);
+int s3c_camif_gpio_put(void);
+
+#endif /* MEDIA_S3C_CAMIF_ */