rt2x00: rt2800lib: turn on tertiary PAs/LNAs for 3T/3R devices

The 3T/3R devices are using the tertiary PAs/LNAs
however those are never turned on. Fix the code to
turn on those on for such devices.

Also modify the code to use switch statements to
improve readability.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2800lib.c

@@ -2678,30 +2678,53 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 
 	tx_pin = 0;
 
-	if (rt2x00dev->default_ant.tx_chain_num > 1) {
-		/* Turn on secondary PAs for 2T and for 3T devices*/
+	switch (rt2x00dev->default_ant.tx_chain_num) {
+	case 3:
+		/* Turn on tertiary PAs */
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN,
+				   rf->channel > 14);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN,
+				   rf->channel <= 14);
+		/* fall-through */
+	case 2:
+		/* Turn on secondary PAs */
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN,
 				   rf->channel > 14);
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN,
 				   rf->channel <= 14);
+		/* fall-through */
+	case 1:
+		/* Turn on primary PAs */
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN,
+				   rf->channel > 14);
+		if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
+			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
+		else
+			rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN,
+					   rf->channel <= 14);
+		break;
 	}
 
-	if (rt2x00dev->default_ant.rx_chain_num > 1) {
-		/* Turn on secondary LNAs for 2R and for 3R devices */
+	switch (rt2x00dev->default_ant.rx_chain_num) {
+	case 3:
+		/* Turn on tertiary LNAs */
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
+		/* fall-through */
+	case 2:
+		/* Turn on secondary LNAs */
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
 		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+		/* fall-through */
+	case 1:
+		/* Turn on primary LNAs */
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+		break;
 	}
 
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
 	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
 	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-	if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags))
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
-	else
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN,
-				   rf->channel <= 14);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
 
 	rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);