drm/bridge: tc358767: move PXL PLL enable/disable to stream enable/disable

We set up the PXL PLL inside tc_main_link_setup. This is unnecessary,
and makes tc_main_link_setup depend on the video-mode, which should not
be the case. As PXL PLL is used only for the video stream (and only when
using the HW test pattern), let's move the PXL PLL setup into
tc_stream_enable.

Also, currently the PXL PLL is only disabled if the driver if removed.
Let's disable the PXL PLL when the stream is disabled.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-10-tomi.valkeinen@ti.com

drivers/gpu/drm/bridge/tc358767.c

@@ -877,14 +877,6 @@ static int tc_main_link_setup(struct tc_data *tc)
 	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
 	tc_wait_pll_lock(tc);
 
-	/* PXL PLL setup */
-	if (tc_test_pattern) {
-		ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
-				    1000 * tc->mode->clock);
-		if (ret)
-			goto err;
-	}
-
 	/* Reset/Enable Main Links */
 	dp_phy_ctrl |= DP_PHY_RST | PHY_M1_RST | PHY_M0_RST;
 	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
@@ -1021,6 +1013,14 @@ static int tc_stream_enable(struct tc_data *tc)
 
 	dev_dbg(tc->dev, "enable video stream\n");
 
+	/* PXL PLL setup */
+	if (tc_test_pattern) {
+		ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
+				    1000 * tc->mode->clock);
+		if (ret)
+			goto err;
+	}
+
 	ret = tc_set_video_mode(tc, tc->mode);
 	if (ret)
 		return ret;
@@ -1065,6 +1065,8 @@ static int tc_stream_disable(struct tc_data *tc)
 
 	tc_write(DP0CTL, 0);
 
+	tc_pxl_pll_dis(tc);
+
 	return 0;
 err:
 	return ret;
@@ -1391,8 +1393,6 @@ static int tc_remove(struct i2c_client *client)
 	drm_bridge_remove(&tc->bridge);
 	drm_dp_aux_unregister(&tc->aux);
 
-	tc_pxl_pll_dis(tc);
-
 	return 0;
 }