Merge branch 'fixes' into next

drivers/dma/imx-sdma.c

@@ -1707,6 +1707,14 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
 	if (!sdma->script_number)
 		sdma->script_number = SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1;
 
+	if (sdma->script_number > sizeof(struct sdma_script_start_addrs)
+				  / sizeof(s32)) {
+		dev_err(sdma->dev,
+			"SDMA script number %d not match with firmware.\n",
+			sdma->script_number);
+		return;
+	}
+
 	for (i = 0; i < sdma->script_number; i++)
 		if (addr_arr[i] > 0)
 			saddr_arr[i] = addr_arr[i];

drivers/dma/qcom/bam_dma.c

@@ -694,6 +694,25 @@ static int bam_dma_terminate_all(struct dma_chan *chan)
 
 	/* remove all transactions, including active transaction */
 	spin_lock_irqsave(&bchan->vc.lock, flag);
+	/*
+	 * If we have transactions queued, then some might be committed to the
+	 * hardware in the desc fifo.  The only way to reset the desc fifo is
+	 * to do a hardware reset (either by pipe or the entire block).
+	 * bam_chan_init_hw() will trigger a pipe reset, and also reinit the
+	 * pipe.  If the pipe is left disabled (default state after pipe reset)
+	 * and is accessed by a connected hardware engine, a fatal error in
+	 * the BAM will occur.  There is a small window where this could happen
+	 * with bam_chan_init_hw(), but it is assumed that the caller has
+	 * stopped activity on any attached hardware engine.  Make sure to do
+	 * this first so that the BAM hardware doesn't cause memory corruption
+	 * by accessing freed resources.
+	 */
+	if (!list_empty(&bchan->desc_list)) {
+		async_desc = list_first_entry(&bchan->desc_list,
+					      struct bam_async_desc, desc_node);
+		bam_chan_init_hw(bchan, async_desc->dir);
+	}
+
 	list_for_each_entry_safe(async_desc, tmp,
 				 &bchan->desc_list, desc_node) {
 		list_add(&async_desc->vd.node, &bchan->vc.desc_issued);

drivers/dma/sprd-dma.c

@@ -134,6 +134,10 @@
 #define SPRD_DMA_SRC_TRSF_STEP_OFFSET	0
 #define SPRD_DMA_TRSF_STEP_MASK		GENMASK(15, 0)
 
+/* SPRD DMA_SRC_BLK_STEP register definition */
+#define SPRD_DMA_LLIST_HIGH_MASK	GENMASK(31, 28)
+#define SPRD_DMA_LLIST_HIGH_SHIFT	28
+
 /* define DMA channel mode & trigger mode mask */
 #define SPRD_DMA_CHN_MODE_MASK		GENMASK(7, 0)
 #define SPRD_DMA_TRG_MODE_MASK		GENMASK(7, 0)
@@ -208,6 +212,7 @@ struct sprd_dma_dev {
 	struct sprd_dma_chn	channels[0];
 };
 
+static void sprd_dma_free_desc(struct virt_dma_desc *vd);
 static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param);
 static struct of_dma_filter_info sprd_dma_info = {
 	.filter_fn = sprd_dma_filter_fn,
@@ -609,12 +614,19 @@ static int sprd_dma_alloc_chan_resources(struct dma_chan *chan)
 static void sprd_dma_free_chan_resources(struct dma_chan *chan)
 {
 	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	struct virt_dma_desc *cur_vd = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&schan->vc.lock, flags);
+	if (schan->cur_desc)
+		cur_vd = &schan->cur_desc->vd;
+
 	sprd_dma_stop(schan);
 	spin_unlock_irqrestore(&schan->vc.lock, flags);
 
+	if (cur_vd)
+		sprd_dma_free_desc(cur_vd);
+
 	vchan_free_chan_resources(&schan->vc);
 	pm_runtime_put(chan->device->dev);
 }
@@ -717,6 +729,7 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 	u32 int_mode = flags & SPRD_DMA_INT_MASK;
 	int src_datawidth, dst_datawidth, src_step, dst_step;
 	u32 temp, fix_mode = 0, fix_en = 0;
+	phys_addr_t llist_ptr;
 
 	if (dir == DMA_MEM_TO_DEV) {
 		src_step = sprd_dma_get_step(slave_cfg->src_addr_width);
@@ -814,13 +827,16 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
 		 * Set the link-list pointer point to next link-list
 		 * configuration's physical address.
 		 */
-		hw->llist_ptr = schan->linklist.phy_addr + temp;
+		llist_ptr = schan->linklist.phy_addr + temp;
+		hw->llist_ptr = lower_32_bits(llist_ptr);
+		hw->src_blk_step = (upper_32_bits(llist_ptr) << SPRD_DMA_LLIST_HIGH_SHIFT) &
+			SPRD_DMA_LLIST_HIGH_MASK;
 	} else {
 		hw->llist_ptr = 0;
+		hw->src_blk_step = 0;
 	}
 
 	hw->frg_step = 0;
-	hw->src_blk_step = 0;
 	hw->des_blk_step = 0;
 	return 0;
 }
@@ -1023,15 +1039,22 @@ static int sprd_dma_resume(struct dma_chan *chan)
 static int sprd_dma_terminate_all(struct dma_chan *chan)
 {
 	struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+	struct virt_dma_desc *cur_vd = NULL;
 	unsigned long flags;
 	LIST_HEAD(head);
 
 	spin_lock_irqsave(&schan->vc.lock, flags);
+	if (schan->cur_desc)
+		cur_vd = &schan->cur_desc->vd;
+
 	sprd_dma_stop(schan);
 
 	vchan_get_all_descriptors(&schan->vc, &head);
 	spin_unlock_irqrestore(&schan->vc.lock, flags);
 
+	if (cur_vd)
+		sprd_dma_free_desc(cur_vd);
+
 	vchan_dma_desc_free_list(&schan->vc, &head);
 	return 0;
 }

drivers/dma/tegra210-adma.c

@@ -40,6 +40,7 @@
 #define ADMA_CH_CONFIG_MAX_BURST_SIZE                   16
 #define ADMA_CH_CONFIG_WEIGHT_FOR_WRR(val)		((val) & 0xf)
 #define ADMA_CH_CONFIG_MAX_BUFS				8
+#define TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(reqs)	(reqs << 4)
 
 #define ADMA_CH_FIFO_CTRL				0x2c
 #define TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(val)		(((val) & 0xf) << 8)
@@ -77,6 +78,7 @@ struct tegra_adma;
  * @ch_req_tx_shift: Register offset for AHUB transmit channel select.
  * @ch_req_rx_shift: Register offset for AHUB receive channel select.
  * @ch_base_offset: Register offset of DMA channel registers.
+ * @has_outstanding_reqs: If DMA channel can have outstanding requests.
  * @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
  * @ch_req_mask: Mask for Tx or Rx channel select.
  * @ch_req_max: Maximum number of Tx or Rx channels available.
@@ -95,6 +97,7 @@ struct tegra_adma_chip_data {
 	unsigned int ch_req_max;
 	unsigned int ch_reg_size;
 	unsigned int nr_channels;
+	bool has_outstanding_reqs;
 };
 
 /*
@@ -594,6 +597,8 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
 			 ADMA_CH_CTRL_FLOWCTRL_EN;
 	ch_regs->config |= cdata->adma_get_burst_config(burst_size);
 	ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1);
+	if (cdata->has_outstanding_reqs)
+		ch_regs->config |= TEGRA186_ADMA_CH_CONFIG_OUTSTANDING_REQS(8);
 	ch_regs->fifo_ctrl = cdata->ch_fifo_ctrl;
 	ch_regs->tc = desc->period_len & ADMA_CH_TC_COUNT_MASK;
 
@@ -778,6 +783,7 @@ static const struct tegra_adma_chip_data tegra210_chip_data = {
 	.ch_req_tx_shift	= 28,
 	.ch_req_rx_shift	= 24,
 	.ch_base_offset		= 0,
+	.has_outstanding_reqs	= false,
 	.ch_fifo_ctrl		= TEGRA210_FIFO_CTRL_DEFAULT,
 	.ch_req_mask		= 0xf,
 	.ch_req_max		= 10,
@@ -792,6 +798,7 @@ static const struct tegra_adma_chip_data tegra186_chip_data = {
 	.ch_req_tx_shift	= 27,
 	.ch_req_rx_shift	= 22,
 	.ch_base_offset		= 0x10000,
+	.has_outstanding_reqs	= true,
 	.ch_fifo_ctrl		= TEGRA186_FIFO_CTRL_DEFAULT,
 	.ch_req_mask		= 0x1f,
 	.ch_req_max		= 20,

drivers/dma/ti/cppi41.c

@@ -586,9 +586,22 @@ static struct dma_async_tx_descriptor *cppi41_dma_prep_slave_sg(
 	enum dma_transfer_direction dir, unsigned long tx_flags, void *context)
 {
 	struct cppi41_channel *c = to_cpp41_chan(chan);
+	struct dma_async_tx_descriptor *txd = NULL;
+	struct cppi41_dd *cdd = c->cdd;
 	struct cppi41_desc *d;
 	struct scatterlist *sg;
 	unsigned int i;
+	int error;
+
+	error = pm_runtime_get(cdd->ddev.dev);
+	if (error < 0) {
+		pm_runtime_put_noidle(cdd->ddev.dev);
+
+		return NULL;
+	}
+
+	if (cdd->is_suspended)
+		goto err_out_not_ready;
 
 	d = c->desc;
 	for_each_sg(sgl, sg, sg_len, i) {
@@ -611,7 +624,13 @@ static struct dma_async_tx_descriptor *cppi41_dma_prep_slave_sg(
 		d++;
 	}
 
-	return &c->txd;
+	txd = &c->txd;
+
+err_out_not_ready:
+	pm_runtime_mark_last_busy(cdd->ddev.dev);
+	pm_runtime_put_autosuspend(cdd->ddev.dev);
+
+	return txd;
 }
 
 static void cppi41_compute_td_desc(struct cppi41_desc *d)

drivers/dma/xilinx/xilinx_dma.c

@@ -74,6 +74,9 @@
 #define XILINX_DMA_DMACR_CIRC_EN		BIT(1)
 #define XILINX_DMA_DMACR_RUNSTOP		BIT(0)
 #define XILINX_DMA_DMACR_FSYNCSRC_MASK		GENMASK(6, 5)
+#define XILINX_DMA_DMACR_DELAY_MASK		GENMASK(31, 24)
+#define XILINX_DMA_DMACR_FRAME_COUNT_MASK	GENMASK(23, 16)
+#define XILINX_DMA_DMACR_MASTER_MASK		GENMASK(11, 8)
 
 #define XILINX_DMA_REG_DMASR			0x0004
 #define XILINX_DMA_DMASR_EOL_LATE_ERR		BIT(15)
@@ -1536,7 +1539,8 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
 					   node);
 		hw = &segment->hw;
 
-		xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR, hw->buf_addr);
+		xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR,
+			     xilinx_prep_dma_addr_t(hw->buf_addr));
 
 		/* Start the transfer */
 		dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
@@ -2459,8 +2463,10 @@ int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
 	chan->config.gen_lock = cfg->gen_lock;
 	chan->config.master = cfg->master;
 
+	dmacr &= ~XILINX_DMA_DMACR_GENLOCK_EN;
 	if (cfg->gen_lock && chan->genlock) {
 		dmacr |= XILINX_DMA_DMACR_GENLOCK_EN;
+		dmacr &= ~XILINX_DMA_DMACR_MASTER_MASK;
 		dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT;
 	}
 
@@ -2476,11 +2482,13 @@ int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
 	chan->config.delay = cfg->delay;
 
 	if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) {
+		dmacr &= ~XILINX_DMA_DMACR_FRAME_COUNT_MASK;
 		dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT;
 		chan->config.coalesc = cfg->coalesc;
 	}
 
 	if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) {
+		dmacr &= ~XILINX_DMA_DMACR_DELAY_MASK;
 		dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT;
 		chan->config.delay = cfg->delay;
 	}

include/linux/platform_data/dma-imx-sdma.h

@@ -51,7 +51,10 @@ struct sdma_script_start_addrs {
 	/* End of v2 array */
 	s32 zcanfd_2_mcu_addr;
 	s32 zqspi_2_mcu_addr;
+	s32 mcu_2_ecspi_addr;
 	/* End of v3 array */
+	s32 mcu_2_zqspi_addr;
+	/* End of v4 array */
 };
 
 /**