[CPUFREQ] checkpatch cleanups for speedstep related drivers.

Signed-off-by: Dave Jones <davej@redhat.com>

arch/x86/kernel/cpu/cpufreq/p4-clockmod.c

@@ -27,15 +27,16 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/cpumask.h>
+#include <linux/timex.h>
 
 #include <asm/processor.h>
 #include <asm/msr.h>
-#include <asm/timex.h>
 
 #include "speedstep-lib.h"
 
 #define PFX	"p4-clockmod: "
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"p4-clockmod", msg)
 
 /*
  * Duty Cycle (3bits), note DC_DISABLE is not specified in
@@ -58,7 +59,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 {
 	u32 l, h;
 
-	if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
+	if (!cpu_online(cpu) ||
+	    (newstate > DC_DISABLE) || (newstate == DC_RESV))
 		return -EINVAL;
 
 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
@@ -66,7 +68,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 	if (l & 0x01)
 		dprintk("CPU#%d currently thermal throttled\n", cpu);
 
-	if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
+	if (has_N44_O17_errata[cpu] &&
+	    (newstate == DC_25PT || newstate == DC_DFLT))
 		newstate = DC_38PT;
 
 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
@@ -112,7 +115,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 	struct cpufreq_freqs freqs;
 	int i;
 
-	if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	freqs.old = cpufreq_p4_get(policy->cpu);
@@ -127,7 +131,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
 
-	/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
+	/* run on each logical CPU,
+	 * see section 13.15.3 of IA32 Intel Architecture Software
 	 * Developer's Manual, Volume 3
 	 */
 	for_each_cpu(i, policy->cpus)
@@ -153,28 +158,30 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 {
 	if (c->x86 == 0x06) {
 		if (cpu_has(c, X86_FEATURE_EST))
-			printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
-			       "The acpi-cpufreq module offers voltage scaling"
-			       " in addition of frequency scaling. You should use "
-			       "that instead of p4-clockmod, if possible.\n");
+			printk(KERN_WARNING PFX "Warning: EST-capable CPU "
+			       "detected. The acpi-cpufreq module offers "
+			       "voltage scaling in addition of frequency "
+			       "scaling. You should use that instead of "
+			       "p4-clockmod, if possible.\n");
 		switch (c->x86_model) {
 		case 0x0E: /* Core */
 		case 0x0F: /* Core Duo */
 		case 0x16: /* Celeron Core */
 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
-			return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
+			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
 		case 0x0D: /* Pentium M (Dothan) */
 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
 			/* fall through */
 		case 0x09: /* Pentium M (Banias) */
-			return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+			return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
 		}
 	}
 
 	if (c->x86 != 0xF) {
 		if (!cpu_has(c, X86_FEATURE_EST))
-			printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. "
-				"Please send an e-mail to <cpufreq@vger.kernel.org>\n");
+			printk(KERN_WARNING PFX "Unknown CPU. "
+				"Please send an e-mail to "
+				"<cpufreq@vger.kernel.org>\n");
 		return 0;
 	}
 
@@ -182,16 +189,16 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 	 * throttling is active or not. */
 	p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
 
-	if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) {
+	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
 		printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
 		       "The speedstep-ich or acpi cpufreq modules offer "
 		       "voltage scaling in addition of frequency scaling. "
 		       "You should use either one instead of p4-clockmod, "
 		       "if possible.\n");
-		return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M);
+		return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
 	}
 
-	return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
+	return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
 }
 
 
@@ -223,8 +230,8 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 		return -EINVAL;
 
 	/* table init */
-	for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
-		if ((i<2) && (has_N44_O17_errata[policy->cpu]))
+	for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+		if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
 			p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
 		else
 			p4clockmod_table[i].frequency = (stock_freq * i)/8;
@@ -258,12 +265,12 @@ static unsigned int cpufreq_p4_get(unsigned int cpu)
 		l = DC_DISABLE;
 
 	if (l != DC_DISABLE)
-		return (stock_freq * l / 8);
+		return stock_freq * l / 8;
 
 	return stock_freq;
 }
 
-static struct freq_attr* p4clockmod_attr[] = {
+static struct freq_attr *p4clockmod_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -299,9 +306,10 @@ static int __init cpufreq_p4_init(void)
 
 	ret = cpufreq_register_driver(&p4clockmod_driver);
 	if (!ret)
-		printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
+		printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock "
+				"Modulation available\n");
 
-	return (ret);
+	return ret;
 }
 
 
@@ -311,9 +319,9 @@ static void __exit cpufreq_p4_exit(void)
 }
 
 
-MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>");
-MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+MODULE_LICENSE("GPL");
 
 late_initcall(cpufreq_p4_init);
 module_exit(cpufreq_p4_exit);

arch/x86/kernel/cpu/cpufreq/speedstep-ich.c

@@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset_dev;
 
 /* speedstep_processor
  */
-static unsigned int speedstep_processor = 0;
+static unsigned int speedstep_processor;
 
 static u32 pmbase;
 
@@ -54,7 +54,8 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
 };
 
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"speedstep-ich", msg)
 
 
 /**
@@ -62,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
  *
  * Returns: -ENODEV if no register could be found
  */
-static int speedstep_find_register (void)
+static int speedstep_find_register(void)
 {
 	if (!speedstep_chipset_dev)
 		return -ENODEV;
@@ -90,7 +91,7 @@ static int speedstep_find_register (void)
  *
  *   Tries to change the SpeedStep state.
  */
-static void speedstep_set_state (unsigned int state)
+static void speedstep_set_state(unsigned int state)
 {
 	u8 pm2_blk;
 	u8 value;
@@ -133,11 +134,11 @@ static void speedstep_set_state (unsigned int state)
 
 	dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
 
-	if (state == (value & 0x1)) {
-		dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000));
-	} else {
-		printk (KERN_ERR "cpufreq: change failed - I/O error\n");
-	}
+	if (state == (value & 0x1))
+		dprintk("change to %u MHz succeeded\n",
+			speedstep_get_frequency(speedstep_processor) / 1000);
+	else
+		printk(KERN_ERR "cpufreq: change failed - I/O error\n");
 
 	return;
 }
@@ -149,7 +150,7 @@ static void speedstep_set_state (unsigned int state)
  *   Tries to activate the SpeedStep status and control registers.
  * Returns -EINVAL on an unsupported chipset, and zero on success.
  */
-static int speedstep_activate (void)
+static int speedstep_activate(void)
 {
 	u16 value = 0;
 
@@ -175,20 +176,18 @@ static int speedstep_activate (void)
  * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
  * chipset, or zero on failure.
  */
-static unsigned int speedstep_detect_chipset (void)
+static unsigned int speedstep_detect_chipset(void)
 {
 	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82801DB_12,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 	if (speedstep_chipset_dev)
 		return 4; /* 4-M */
 
 	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82801CA_12,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 	if (speedstep_chipset_dev)
 		return 3; /* 3-M */
@@ -196,8 +195,7 @@ static unsigned int speedstep_detect_chipset (void)
 
 	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82801BA_10,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 	if (speedstep_chipset_dev) {
 		/* speedstep.c causes lockups on Dell Inspirons 8000 and
@@ -208,8 +206,7 @@ static unsigned int speedstep_detect_chipset (void)
 
 		hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82815_MC,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 
 		if (!hostbridge)
@@ -236,7 +233,7 @@ static unsigned int _speedstep_get(const struct cpumask *cpus)
 
 	cpus_allowed = current->cpus_allowed;
 	set_cpus_allowed_ptr(current, cpus);
-	speed = speedstep_get_processor_frequency(speedstep_processor);
+	speed = speedstep_get_frequency(speedstep_processor);
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 	dprintk("detected %u kHz as current frequency\n", speed);
 	return speed;
@@ -251,11 +248,12 @@ static unsigned int speedstep_get(unsigned int cpu)
  * speedstep_target - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * Sets a new CPUFreq policy.
  */
-static int speedstep_target (struct cpufreq_policy *policy,
+static int speedstep_target(struct cpufreq_policy *policy,
 			     unsigned int target_freq,
 			     unsigned int relation)
 {
@@ -264,7 +262,8 @@ static int speedstep_target (struct cpufreq_policy *policy,
 	cpumask_t cpus_allowed;
 	int i;
 
-	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	freqs.old = _speedstep_get(policy->cpus);
@@ -308,7 +307,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
  * Limit must be within speedstep_low_freq and speedstep_high_freq, with
  * at least one border included.
  */
-static int speedstep_verify (struct cpufreq_policy *policy)
+static int speedstep_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
 }
@@ -344,7 +343,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 		return -EIO;
 
 	dprintk("currently at %s speed setting - %i MHz\n",
-		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
+		? "low" : "high",
 		(speed / 1000));
 
 	/* cpuinfo and default policy values */
@@ -352,9 +352,9 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 
 	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
 	if (result)
-		return (result);
+		return result;
 
-        cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
 
 	return 0;
 }
@@ -366,7 +366,7 @@ static int speedstep_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct freq_attr* speedstep_attr[] = {
+static struct freq_attr *speedstep_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -396,13 +396,15 @@ static int __init speedstep_init(void)
 	/* detect processor */
 	speedstep_processor = speedstep_detect_processor();
 	if (!speedstep_processor) {
-		dprintk("Intel(R) SpeedStep(TM) capable processor not found\n");
+		dprintk("Intel(R) SpeedStep(TM) capable processor "
+				"not found\n");
 		return -ENODEV;
 	}
 
 	/* detect chipset */
 	if (!speedstep_detect_chipset()) {
-		dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n");
+		dprintk("Intel(R) SpeedStep(TM) for this chipset not "
+				"(yet) available.\n");
 		return -ENODEV;
 	}
 
@@ -431,9 +433,11 @@ static void __exit speedstep_exit(void)
 }
 
 
-MODULE_AUTHOR ("Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dave Jones <davej@redhat.com>, "
+		"Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets "
+		"with ICH-M southbridges.");
+MODULE_LICENSE("GPL");
 
 module_init(speedstep_init);
 module_exit(speedstep_exit);

arch/x86/kernel/cpu/cpufreq/speedstep-lib.h

@@ -12,17 +12,17 @@
 
 /* processors */
 
-#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY	0x00000001  /* Coppermine core */
-#define SPEEDSTEP_PROCESSOR_PIII_C		0x00000002  /* Coppermine core */
-#define SPEEDSTEP_PROCESSOR_PIII_T		0x00000003  /* Tualatin core */
-#define SPEEDSTEP_PROCESSOR_P4M			0x00000004  /* P4-M  */
+#define SPEEDSTEP_CPU_PIII_C_EARLY	0x00000001  /* Coppermine core */
+#define SPEEDSTEP_CPU_PIII_C		0x00000002  /* Coppermine core */
+#define SPEEDSTEP_CPU_PIII_T		0x00000003  /* Tualatin core */
+#define SPEEDSTEP_CPU_P4M		0x00000004  /* P4-M  */
 
 /* the following processors are not speedstep-capable and are not auto-detected
  * in speedstep_detect_processor(). However, their speed can be detected using
- * the speedstep_get_processor_frequency() call. */
-#define SPEEDSTEP_PROCESSOR_PM			0xFFFFFF03  /* Pentium M  */
-#define SPEEDSTEP_PROCESSOR_P4D			0xFFFFFF04  /* desktop P4  */
-#define SPEEDSTEP_PROCESSOR_PCORE		0xFFFFFF05  /* Core */
+ * the speedstep_get_frequency() call. */
+#define SPEEDSTEP_CPU_PM		0xFFFFFF03  /* Pentium M  */
+#define SPEEDSTEP_CPU_P4D		0xFFFFFF04  /* desktop P4  */
+#define SPEEDSTEP_CPU_PCORE		0xFFFFFF05  /* Core */
 
 /* speedstep states -- only two of them */
 
@@ -34,7 +34,7 @@
 extern unsigned int speedstep_detect_processor (void);
 
 /* detect the current speed (in khz) of the processor */
-extern unsigned int speedstep_get_processor_frequency(unsigned int processor);
+extern unsigned int speedstep_get_frequency(unsigned int processor);
 
 
 /* detect the low and high speeds of the processor. The callback