Commit bccaea8f authored by Jerone Young's avatar Jerone Young Committed by Kumar Gala

powerpc/booke: Fix definitions for dbcr[1-2] and dbsr registers

This takes values from the PowerPC ISA BookIII-E specifications that are
for DBCR0. Many of these values are different from those currently
specified, which are for the ppc405. Also added some bookE definitions
for DBCR1 & DBCR2.

[ galak@kernel.crashing.org: Added aliases to 40x DBCR0 to match Book-E,
  Added enhanced debug DBCR0/DBSR _CIRPT and _CRET defines and DBSR
  IRPT and RET. ]
Signed-off-by: default avatarJerone Young <jyoung5@us.ibm.com>
Acked-by: default avatarJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent fec6a822
......@@ -210,6 +210,7 @@
#ifdef CONFIG_BOOKE
#define DBSR_IC 0x08000000 /* Instruction Completion */
#define DBSR_BT 0x04000000 /* Branch Taken */
#define DBSR_IRPT 0x02000000 /* Exception Debug Event */
#define DBSR_TIE 0x01000000 /* Trap Instruction Event */
#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */
#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */
......@@ -219,10 +220,14 @@
#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */
#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */
#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */
#define DBSR_RET 0x00008000 /* Return Debug Event */
#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */
#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */
#endif
#ifdef CONFIG_40x
#define DBSR_IC 0x80000000 /* Instruction Completion */
#define DBSR_BT 0x40000000 /* Branch taken */
#define DBSR_IRPT 0x20000000 /* Exception Debug Event */
#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */
#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */
#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */
......@@ -253,6 +258,7 @@
#define ESR_BO 0x00020000 /* Byte Ordering */
/* Bit definitions related to the DBCR0. */
#if defined(CONFIG_40x)
#define DBCR0_EDM 0x80000000 /* External Debug Mode */
#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
......@@ -261,20 +267,69 @@
#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
#define DBCR0_RST_NONE 0x00000000 /* No Reset */
#define DBCR0_IC 0x08000000 /* Instruction Completion */
#define DBCR0_ICMP DBCR0_IC
#define DBCR0_BT 0x04000000 /* Branch Taken */
#define DBCR0_BRT DBCR0_BT
#define DBCR0_EDE 0x02000000 /* Exception Debug Event */
#define DBCR0_IRPT DBCR0_EDE
#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */
#define DBCR0_IAC1 DBCR0_IA1
#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */
#define DBCR0_IAC2 DBCR0_IA2
#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */
#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */
#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */
#define DBCR0_IAC3 DBCR0_IA3
#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */
#define DBCR0_IAC4 DBCR0_IA4
#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */
#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */
#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */
#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */
#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
#elif defined(CONFIG_BOOKE)
#define DBCR0_EDM 0x80000000 /* External Debug Mode */
#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */
#define DBCR0_RST 0x30000000 /* all the bits in the RST field */
/* DBCR0_RST_* is 44x specific and not followed in fsl booke */
#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */
#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */
#define DBCR0_RST_CORE 0x10000000 /* Core Reset */
#define DBCR0_RST_NONE 0x00000000 /* No Reset */
#define DBCR0_ICMP 0x08000000 /* Instruction Completion */
#define DBCR0_IC DBCR0_ICMP
#define DBCR0_BRT 0x04000000 /* Branch Taken */
#define DBCR0_BT DBCR0_BRT
#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */
#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */
#define DBCR0_TIE DBCR0_TDE
#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */
#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */
#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */
#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */
#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */
#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */
#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */
#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */
#define DBCR0_RET 0x00008000 /* Return Debug Event */
#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */
#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */
#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */
/* Bit definitions related to the DBCR1. */
#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */
#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */
#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */
#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */
#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */
#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */
/* Bit definitions related to the DBCR2. */
#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */
#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */
#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */
#endif
/* Bit definitions related to the TCR. */
#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment