Merge tag 'fpga-dfl-for-5.5' of...

Merge tag 'fpga-dfl-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next

Moritz writes:

Here is the first set of FPGA changes for 5.5

The first patch from Stephen is a trivial cleanup patch.

The following three patches add hwmon support to DFL FPGAs.

All of this patches have been reviewed and been in the last couple
of linux-next releases without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>

* tag 'fpga-dfl-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
  fpga: dfl: fme: add power management support
  fpga: dfl: fme: add thermal management support
  Documentation: fpga: dfl: add descriptions for thermal/power management interfaces
  fpga: Remove dev_err() usage after platform_get_irq()

Documentation/ABI/testing/sysfs-platform-dfl-fme

@@ -106,3 +106,135 @@ KernelVersion:  5.4
 Contact:	Wu Hao <hao.wu@intel.com>
 Description:	Read-only. Read this file to get the second error detected by
 		hardware.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/name
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Only. Read this file to get the name of hwmon device, it
+		supports values:
+		    'dfl_fme_thermal' - thermal hwmon device name
+		    'dfl_fme_power'   - power hwmon device name
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Only. It returns FPGA device temperature in millidegrees
+		Celsius.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_max
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Only. It returns hardware threshold1 temperature in
+		millidegrees Celsius. If temperature rises at or above this
+		threshold, hardware starts 50% or 90% throttling (see
+		'temp1_max_policy').
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_crit
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Only. It returns hardware threshold2 temperature in
+		millidegrees Celsius. If temperature rises at or above this
+		threshold, hardware starts 100% throttling.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_emergency
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Only. It returns hardware trip threshold temperature in
+		millidegrees Celsius. If temperature rises at or above this
+		threshold, a fatal event will be triggered to board management
+		controller (BMC) to shutdown FPGA.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_max_alarm
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-only. It returns 1 if temperature is currently at or above
+		hardware threshold1 (see 'temp1_max'), otherwise 0.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_crit_alarm
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-only. It returns 1 if temperature is currently at or above
+		hardware threshold2 (see 'temp1_crit'), otherwise 0.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_max_policy
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Only. Read this file to get the policy of hardware threshold1
+		(see 'temp1_max'). It only supports two values (policies):
+		    0 - AP2 state (90% throttling)
+		    1 - AP1 state (50% throttling)
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_input
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Only. It returns current FPGA power consumption in uW.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_max
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Write. Read this file to get current hardware power
+		threshold1 in uW. If power consumption rises at or above
+		this threshold, hardware starts 50% throttling.
+		Write this file to set current hardware power threshold1 in uW.
+		As hardware only accepts values in Watts, so input value will
+		be round down per Watts (< 1 watts part will be discarded) and
+		clamped within the range from 0 to 127 Watts. Write fails with
+		-EINVAL if input parsing fails.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Write. Read this file to get current hardware power
+		threshold2 in uW. If power consumption rises at or above
+		this threshold, hardware starts 90% throttling.
+		Write this file to set current hardware power threshold2 in uW.
+		As hardware only accepts values in Watts, so input value will
+		be round down per Watts (< 1 watts part will be discarded) and
+		clamped within the range from 0 to 127 Watts. Write fails with
+		-EINVAL if input parsing fails.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_max_alarm
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-only. It returns 1 if power consumption is currently at or
+		above hardware threshold1 (see 'power1_max'), otherwise 0.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_crit_alarm
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-only. It returns 1 if power consumption is currently at or
+		above hardware threshold2 (see 'power1_crit'), otherwise 0.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_xeon_limit
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Only. It returns power limit for XEON in uW.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_fpga_limit
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-Only. It returns power limit for FPGA in uW.
+
+What:		/sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/power1_ltr
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	Wu Hao <hao.wu@intel.com>
+Description:	Read-only. Read this file to get current Latency Tolerance
+		Reporting (ltr) value. It returns 1 if all Accelerated
+		Function Units (AFUs) can tolerate latency >= 40us for memory
+		access or 0 if any AFU is latency sensitive (< 40us).

Documentation/fpga/dfl.rst

@@ -108,6 +108,16 @@ More functions are exposed through sysfs
      error reporting sysfs interfaces allow user to read errors detected by the
      hardware, and clear the logged errors.
 
+ Power management (dfl_fme_power hwmon)
+     power management hwmon sysfs interfaces allow user to read power management
+     information (power consumption, thresholds, threshold status, limits, etc.)
+     and configure power thresholds for different throttling levels.
+
+ Thermal management (dfl_fme_thermal hwmon)
+     thermal management hwmon sysfs interfaces allow user to read thermal
+     management information (current temperature, thresholds, threshold status,
+     etc.).
+
 
 FIU - PORT
 ==========

drivers/fpga/Kconfig

@@ -156,7 +156,7 @@ config FPGA_DFL
 
 config FPGA_DFL_FME
 	tristate "FPGA DFL FME Driver"
-	depends on FPGA_DFL
+	depends on FPGA_DFL && HWMON
 	help
 	  The FPGA Management Engine (FME) is a feature device implemented
 	  under Device Feature List (DFL) framework. Select this option to

drivers/fpga/zynq-fpga.c

@@ -578,10 +578,8 @@ static int zynq_fpga_probe(struct platform_device *pdev)
 	init_completion(&priv->dma_done);
 
 	priv->irq = platform_get_irq(pdev, 0);
-	if (priv->irq < 0) {
-		dev_err(dev, "No IRQ available\n");
+	if (priv->irq < 0)
 		return priv->irq;
-	}
 
 	priv->clk = devm_clk_get(dev, "ref_clk");
 	if (IS_ERR(priv->clk)) {