Commit bd540ebe authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Sekhar Nori

ARM: dts: da850-lcdk: Correct the audio codec regulators

Add the board level fixed regulators for 3.3V and 1.8V which is used to
power - among other things - the tlv320aic3106 codec.

Apart from removing the following warning during boot:
tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22

With the correct voltages the driver can select correct OCMV value to
reduce pop noise.
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
parent 7fca69d4
...@@ -39,6 +39,36 @@ dsp_memory_region: dsp-memory@c3000000 { ...@@ -39,6 +39,36 @@ dsp_memory_region: dsp-memory@c3000000 {
}; };
}; };
vcc_5vd: fixedregulator-vcc_5vd {
compatible = "regulator-fixed";
regulator-name = "vcc_5vd";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
vcc_3v3d: fixedregulator-vcc_3v3d {
/* TPS650250 - VDCDC1 */
compatible = "regulator-fixed";
regulator-name = "vcc_3v3d";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_5vd>;
regulator-always-on;
regulator-boot-on;
};
vcc_1v8d: fixedregulator-vcc_1v8d {
/* TPS650250 - VDCDC2 */
compatible = "regulator-fixed";
regulator-name = "vcc_1v8d";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_5vd>;
regulator-always-on;
regulator-boot-on;
};
sound { sound {
compatible = "simple-audio-card"; compatible = "simple-audio-card";
simple-audio-card,name = "DA850/OMAP-L138 LCDK"; simple-audio-card,name = "DA850/OMAP-L138 LCDK";
...@@ -221,6 +251,12 @@ tlv320aic3106: tlv320aic3106@18 { ...@@ -221,6 +251,12 @@ tlv320aic3106: tlv320aic3106@18 {
compatible = "ti,tlv320aic3106"; compatible = "ti,tlv320aic3106";
reg = <0x18>; reg = <0x18>;
status = "okay"; status = "okay";
/* Regulators */
IOVDD-supply = <&vcc_3v3d>;
AVDD-supply = <&vcc_3v3d>;
DRVDD-supply = <&vcc_3v3d>;
DVDD-supply = <&vcc_1v8d>;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment