Staging: comedi: adl_pci6208: code styling fix

Fix a checkpatch.pl errors.
Signed-off-by: Vlatko Kosturjak <kost@linux.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/comedi/drivers/adl_pci6208.c

@@ -133,9 +133,11 @@ static int pci6208_ao_winsn(struct comedi_device *dev,
 static int pci6208_ao_rinsn(struct comedi_device *dev,
 			    struct comedi_subdevice *s,
 			    struct comedi_insn *insn, unsigned int *data);
-/* static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* static int pci6208_dio_insn_bits (struct comedi_device *dev,
+ * 					struct comedi_subdevice *s, */
 /* struct comedi_insn *insn,unsigned int *data); */
-/* static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* static int pci6208_dio_insn_config(struct comedi_device *dev,
+ * 					struct comedi_subdevice *s, */
 /* struct comedi_insn *insn,unsigned int *data); */
 
 /*
@@ -151,7 +153,7 @@ static int pci6208_attach(struct comedi_device *dev,
 	int retval;
 	unsigned long io_base;
 
-	printk("comedi%d: pci6208: ", dev->minor);
+	printk(KERN_INFO "comedi%d: pci6208: ", dev->minor);
 
 	retval = alloc_private(dev, sizeof(struct pci6208_private));
 	if (retval < 0)
@@ -195,7 +197,7 @@ static int pci6208_attach(struct comedi_device *dev,
 	/* s->insn_bits = pci6208_dio_insn_bits; */
 	/* s->insn_config = pci6208_dio_insn_config; */
 
-	printk("attached\n");
+	printk(KERN_INFO "attached\n");
 
 	return 1;
 }
@@ -210,12 +212,11 @@ static int pci6208_attach(struct comedi_device *dev,
  */
 static int pci6208_detach(struct comedi_device *dev)
 {
-	printk("comedi%d: pci6208: remove\n", dev->minor);
+	printk(KERN_INFO "comedi%d: pci6208: remove\n", dev->minor);
 
 	if (devpriv && devpriv->pci_dev) {
-		if (dev->iobase) {
+		if (dev->iobase)
 			comedi_pci_disable(devpriv->pci_dev);
-		}
 		pci_dev_put(devpriv->pci_dev);
 	}
 
@@ -266,7 +267,8 @@ static int pci6208_ao_rinsn(struct comedi_device *dev,
  * useful to applications if you implement the insn_bits interface.
  * This allows packed reading/writing of the DIO channels.  The
  * comedi core can convert between insn_bits and insn_read/write */
-/* static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* static int pci6208_dio_insn_bits(struct comedi_device *dev,
+ * 					struct comedi_subdevice *s, */
 /* struct comedi_insn *insn,unsigned int *data) */
 /* { */
 /* if(insn->n!=2)return -EINVAL; */
@@ -290,7 +292,8 @@ static int pci6208_ao_rinsn(struct comedi_device *dev,
 /* return 2; */
 /* } */
 
-/* static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, */
+/* static int pci6208_dio_insn_config(struct comedi_device *dev,
+ * 					struct comedi_subdevice *s, */
 /* struct comedi_insn *insn,unsigned int *data) */
 /* { */
 /* int chan=CR_CHAN(insn->chanspec); */
@@ -320,10 +323,16 @@ static int pci6208_find_device(struct comedi_device *dev, int bus, int slot)
 	     pci_dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) {
 		if (pci_dev->vendor == PCI_VENDOR_ID_ADLINK) {
 			for (i = 0; i < ARRAY_SIZE(pci6208_boards); i++) {
-				if (pci6208_boards[i].dev_id == pci_dev->device) {
-					/*  was a particular bus/slot requested? */
+				if (pci6208_boards[i].dev_id ==
+					pci_dev->device) {
+					/*
+					 * was a particular bus/slot requested?
+					*/
 					if ((bus != 0) || (slot != 0)) {
-						/*  are we on the wrong bus/slot? */
+						/*
+						 * are we on the
+						 * wrong bus/slot?
+						*/
 						if (pci_dev->bus->number
 						    != bus ||
 						    PCI_SLOT(pci_dev->devfn)
@@ -338,8 +347,9 @@ static int pci6208_find_device(struct comedi_device *dev, int bus, int slot)
 		}
 	}
 
-	printk("comedi%d: no supported board found! (req. bus/slot : %d/%d)\n",
-	       dev->minor, bus, slot);
+	printk(KERN_ERR "comedi%d: no supported board found! "
+			"(req. bus/slot : %d/%d)\n",
+			dev->minor, bus, slot);
 	return -EIO;
 
 found:
@@ -368,17 +378,20 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr,
 
 	/*  Enable PCI device and request regions */
 	if (comedi_pci_enable(pci_dev, PCI6208_DRIVER_NAME) < 0) {
-		printk
-		    ("comedi%d: Failed to enable PCI device and request regions\n",
-		     dev_minor);
+		printk(KERN_ERR "comedi%d: Failed to enable PCI device "
+			"and request regions\n",
+			dev_minor);
 		return -EIO;
 	}
-	/*  Read local configuration register base address [PCI_BASE_ADDRESS #1]. */
+	/* Read local configuration register
+	 * base address [PCI_BASE_ADDRESS #1].
+	 */
 	lcr_io_base = pci_resource_start(pci_dev, 1);
 	lcr_io_range = pci_resource_len(pci_dev, 1);
 
-	printk("comedi%d: local config registers at address 0x%4lx [0x%4lx]\n",
-	       dev_minor, lcr_io_base, lcr_io_range);
+	printk(KERN_INFO "comedi%d: local config registers at address"
+			" 0x%4lx [0x%4lx]\n",
+			dev_minor, lcr_io_base, lcr_io_range);
 
 	/*  Read PCI6208 register base address [PCI_BASE_ADDRESS #2]. */
 	io_base = pci_resource_start(pci_dev, 2);