Merge branch 'mlxsw-ethtool'

Jiri Pirko says:

====================
mlxsw: ethtool enhancements

Ido says:

Patches 1-4 do some minor cleanup in current ethtool ops. Patch 5
replace legacy {get,set}_settings callbacks with
{get,set}_link_ksettings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlxsw/reg.h

@@ -2138,6 +2138,18 @@ MLXSW_ITEM32(reg, ptys, local_port, 0x00, 16, 8);
  */
 MLXSW_ITEM32(reg, ptys, proto_mask, 0x00, 0, 3);
 
+enum {
+	MLXSW_REG_PTYS_AN_STATUS_NA,
+	MLXSW_REG_PTYS_AN_STATUS_OK,
+	MLXSW_REG_PTYS_AN_STATUS_FAIL,
+};
+
+/* reg_ptys_an_status
+ * Autonegotiation status.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ptys, an_status, 0x04, 28, 4);
+
 #define MLXSW_REG_PTYS_ETH_SPEED_SGMII			BIT(0)
 #define MLXSW_REG_PTYS_ETH_SPEED_1000BASE_KX		BIT(1)
 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4		BIT(2)
@@ -2152,6 +2164,7 @@ MLXSW_ITEM32(reg, ptys, proto_mask, 0x00, 0, 3);
 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_ER_LR		BIT(14)
 #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_SR4		BIT(15)
 #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_LR4_ER4	BIT(16)
+#define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_SR2		BIT(18)
 #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR4		BIT(19)
 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4		BIT(20)
 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4		BIT(21)
@@ -2184,6 +2197,13 @@ MLXSW_ITEM32(reg, ptys, eth_proto_admin, 0x18, 0, 32);
  */
 MLXSW_ITEM32(reg, ptys, eth_proto_oper, 0x24, 0, 32);
 
+/* reg_ptys_eth_proto_lp_advertise
+ * The protocols that were advertised by the link partner during
+ * autonegotiation.
+ * Access: RO
+ */
+MLXSW_ITEM32(reg, ptys, eth_proto_lp_advertise, 0x30, 0, 32);
+
 static inline void mlxsw_reg_ptys_pack(char *payload, u8 local_port,
 				       u32 proto_admin)
 {

drivers/net/ethernet/mellanox/mlxsw/spectrum.h

@@ -341,7 +341,8 @@ struct mlxsw_sp_port {
 	} vport;
 	struct {
 		u8 tx_pause:1,
-		   rx_pause:1;
+		   rx_pause:1,
+		   autoneg:1;
 	} link;
 	struct {
 		struct ieee_ets *ets;