[POWERPC] Uartlite: Flush RX fifo in bootwrapper

Flush the uartlite RX fifo so that characters typed before entry into
the zImage wrapper do not muck up the kernel command line.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

arch/ppc/boot/simple/misc-embedded.c

@@ -89,7 +89,9 @@ load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, bd_t *b
 	 * initialize the serial console port.
 	 */
 	embed_config(&bp);
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
+#if defined(CONFIG_SERIAL_CPM_CONSOLE) || \
+    defined(CONFIG_SERIAL_8250_CONSOLE) || \
+    defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
 	com_port = serial_init(0, bp);
 #endif
 

arch/ppc/boot/simple/uartlite_tty.c

@@ -16,6 +16,14 @@
 
 #define UARTLITE_BASEADDR ((void*)(XPAR_UARTLITE_0_BASEADDR))
 
+unsigned long
+serial_init(int chan, void *ignored)
+{
+	/* Clear the RX FIFO */
+	out_be32(UARTLITE_BASEADDR + 0x0C, 0x2);
+	return 0;
+}
+
 void
 serial_putc(unsigned long com_port, unsigned char c)
 {