Merge

arch/alpha/Config.help

@@ -558,34 +558,6 @@ CONFIG_CD_NO_IDESCSI
   answer will get "defaulted" for you if you enable any of the Linux
   CD-ROM drivers).
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_MAGIC_SYSRQ
   If you say Y here, you will have some control over the system even
   if the system crashes for example during kernel debugging (e.g., you

arch/arm/Config.help

@@ -432,34 +432,6 @@ CONFIG_APM
   and read <file:Documentation/modules.txt>. The module will be called
   apm.o.
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_MAGIC_SYSRQ
   If you say Y here, you will have some control over the system even
   if the system crashes for example during kernel debugging (e.g., you

arch/cris/Config.help

@@ -143,34 +143,6 @@ CONFIG_CD_NO_IDESCSI
   answer will get "defaulted" for you if you enable any of the Linux
   CD-ROM drivers).
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_ETRAX100LX
   Support version 1 of the Etrax 100LX.
 

arch/i386/Config.help

@@ -861,34 +861,6 @@ CONFIG_X86_CPUID
   with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
   /dev/cpu/31/cpuid.
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_MAGIC_SYSRQ
   If you say Y here, you will have some control over the system even
   if the system crashes for example during kernel debugging (e.g., you

arch/ia64/Config.help

@@ -385,34 +385,6 @@ CONFIG_ACPI_KERNEL_CONFIG
   If you say `Y' here, Linux's ACPI support will use the
   hardware-level system descriptions found on IA64 machines.
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_MAGIC_SYSRQ
   If you say Y here, you will have some control over the system even
   if the system crashes for example during kernel debugging (e.g., you

arch/m68k/Config.help

@@ -1093,34 +1093,6 @@ CONFIG_NVRAM
   The module will be called nvram.o. If you want to compile it as a
   module, say M here and read <file:Documentation/modules.txt>.
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_MAGIC_SYSRQ
   If you say Y here, you will have some control over the system even
   if the system crashes for example during kernel debugging (e.g., you

arch/mips/Config.help

@@ -785,34 +785,6 @@ CONFIG_RTC
   The module is called rtc.o. If you want to compile it as a module,
   say M here and read <file:Documentation/modules.txt>.
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_CROSSCOMPILE
   Say Y here if you are compiling the kernel on a different
   architecture than the one it is intended to run on.

arch/mips64/Config.help

@@ -371,34 +371,6 @@ CONFIG_CD_NO_IDESCSI
   answer will get "defaulted" for you if you enable any of the Linux
   CD-ROM drivers).
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_CROSSCOMPILE
   Say Y here if you are compiling the kernel on a different
   architecture than the one it is intended to run on.

arch/parisc/Config.help

@@ -476,34 +476,6 @@ CONFIG_STI_CONSOLE
   machines.  Say Y here to build support for it into your kernel.
   The alternative is to use your primary serial port as a console.
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_MAGIC_SYSRQ
   If you say Y here, you will have some control over the system even
   if the system crashes for example during kernel debugging (e.g., you

arch/ppc/Config.help

@@ -512,34 +512,6 @@ CONFIG_MOUSE
   kernel: saying N will just cause the configurator to skip all
   the questions about non-serial mice. If unsure, say Y.
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_MAGIC_SYSRQ
   If you say Y here, you will have some control over the system even
   if the system crashes for example during kernel debugging (e.g., you

arch/sh/Config.help

@@ -623,34 +623,6 @@ CONFIG_RTC
   The module is called rtc.o. If you want to compile it as a module,
   say M here and read <file:Documentation/modules.txt>.
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_MAGIC_SYSRQ
   If you say Y here, you will have some control over the system even
   if the system crashes for example during kernel debugging (e.g., you

arch/sparc64/Config.help

@@ -1143,34 +1143,6 @@ CONFIG_RTC
   The module is called rtc.o. If you want to compile it as a module,
   say M here and read <file:Documentation/modules.txt>.
 
-CONFIG_SOUND
-  If you have a sound card in your computer, i.e. if it can say more
-  than an occasional beep, say Y.  Be sure to have all the information
-  about your sound card and its configuration down (I/O port,
-  interrupt and DMA channel), because you will be asked for it.
-
-  You want to read the Sound-HOWTO, available from
-  <http://www.linuxdoc.org/docs.html#howto>. General information about
-  the modular sound system is contained in the files
-  <file:Documentation/sound/Introduction>.  The file
-  <file:Documentation/sound/README.OSS> contains some slightly
-  outdated but still useful information as well.
-
-  If you have a PnP sound card and you want to configure it at boot
-  time using the ISA PnP tools (read
-  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
-  compile the sound card support as a module ( = code which can be
-  inserted in and removed from the running kernel whenever you want)
-  and load that module after the PnP configuration is finished.  To do
-  this, say M here and read <file:Documentation/modules.txt> as well
-  as <file:Documentation/sound/README.modules>; the module will be
-  called soundcore.o.
-
-  I'm told that even without a sound card, you can make your computer
-  say more than an occasional beep, by programming the PC speaker.
-  Kernel patches and supporting utilities to do that are in the pcsp
-  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
 CONFIG_MAGIC_SYSRQ
   If you say Y here, you will have some control over the system even
   if the system crashes for example during kernel debugging (e.g., you

sound/oss/Config.help

+CONFIG_SOUND
+  If you have a sound card in your computer, i.e. if it can say more
+  than an occasional beep, say Y.  Be sure to have all the information
+  about your sound card and its configuration down (I/O port,
+  interrupt and DMA channel), because you will be asked for it.
+
+  You want to read the Sound-HOWTO, available from
+  <http://www.linuxdoc.org/docs.html#howto>. General information about
+  the modular sound system is contained in the files
+  <file:Documentation/sound/Introduction>.  The file
+  <file:Documentation/sound/README.OSS> contains some slightly
+  outdated but still useful information as well.
+
+  If you have a PnP sound card and you want to configure it at boot
+  time using the ISA PnP tools (read
+  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
+  compile the sound card support as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want)
+  and load that module after the PnP configuration is finished.  To do
+  this, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/sound/README.modules>; the module will be
+  called soundcore.o.
+
+  I'm told that even without a sound card, you can make your computer
+  say more than an occasional beep, by programming the PC speaker.
+  Kernel patches and supporting utilities to do that are in the pcsp
+  package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+
 CONFIG_INPUT_GAMEPORT
   Gameport support is for the standard 15-pin PC gameport.  If you
   have a joystick, gamepad, gameport card, a soundcard with a gameport