[media] rtl28xxu: convert to new DVB USB

Tested-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-usb-v2/Kconfig

@@ -124,3 +124,16 @@ config DVB_USB_MXL111SF
 	help
 	  Say Y here to support the MxL111SF USB2.0 DTV receiver.
 
+config DVB_USB_RTL28XXU
+	tristate "Realtek RTL28xxU DVB USB support"
+	depends on DVB_USB_V2 && EXPERIMENTAL
+	select DVB_RTL2830
+	select DVB_RTL2832
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE
+	help
+	  Say Y here to support the Realtek RTL28xxU DVB USB receiver.
+

drivers/media/dvb/dvb-usb-v2/Makefile

@@ -36,6 +36,9 @@ obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o
 obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o
 obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
 
+dvb-usb-rtl28xxu-objs = rtl28xxu.o
+obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
+
 ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core
 ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/
 ccflags-y += -I$(srctree)/drivers/media/common/tuners

drivers/media/dvb/dvb-usb/rtl28xxu.h → drivers/media/dvb/dvb-usb-v2/rtl28xxu.h

@@ -22,27 +22,17 @@
 #ifndef RTL28XXU_H
 #define RTL28XXU_H
 
-#define DVB_USB_LOG_PREFIX "rtl28xxu"
-#include "dvb-usb.h"
+#include "dvb_usb.h"
 
-#define deb_info(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x01, args)
-#define deb_rc(args...)   dprintk(dvb_usb_rtl28xxu_debug, 0x02, args)
-#define deb_xfer(args...) dprintk(dvb_usb_rtl28xxu_debug, 0x04, args)
-#define deb_reg(args...)  dprintk(dvb_usb_rtl28xxu_debug, 0x08, args)
-#define deb_i2c(args...)  dprintk(dvb_usb_rtl28xxu_debug, 0x10, args)
-#define deb_fw(args...)   dprintk(dvb_usb_rtl28xxu_debug, 0x20, args)
-
-#define deb_dump(r, t, v, i, b, l, func) { \
-	int loop_; \
-	func("%02x %02x %02x %02x %02x %02x %02x %02x", \
-		t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
+#define deb_dump(r, t, v, i, b, l) { \
+	char *direction; \
 	if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
-		func(" >>> "); \
+		direction = ">>>"; \
 	else \
-		func(" <<< "); \
-	for (loop_ = 0; loop_ < l; loop_++) \
-		func("%02x ", b[loop_]); \
-	func("\n");\
+		direction = "<<<"; \
+	dev_dbg(&d->udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \
+			"%s [%d bytes]\n",  __func__, t, r, v & 0xff, v >> 8, \
+			i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l); \
 }
 
 /*

drivers/media/dvb/dvb-usb/Kconfig

@@ -319,16 +319,3 @@ config DVB_USB_IT913X
 	help
 	  Say Y here to support the it913x device
 
-config DVB_USB_RTL28XXU
-	tristate "Realtek RTL28xxU DVB USB support"
-	depends on DVB_USB && EXPERIMENTAL
-	select DVB_RTL2830
-	select DVB_RTL2832
-	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_FC0012 if !MEDIA_TUNER_CUSTOMISE
-	select MEDIA_TUNER_FC0013 if !MEDIA_TUNER_CUSTOMISE
-	help
-	  Say Y here to support the Realtek RTL28xxU DVB USB receiver.
-

drivers/media/dvb/dvb-usb/Makefile

@@ -78,9 +78,6 @@ obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o
 dvb-usb-it913x-objs := it913x.o
 obj-$(CONFIG_DVB_USB_IT913X) += dvb-usb-it913x.o
 
-dvb-usb-rtl28xxu-objs = rtl28xxu.o
-obj-$(CONFIG_DVB_USB_RTL28XXU) += dvb-usb-rtl28xxu.o
-
 ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core
 ccflags-y += -I$(srctree)/drivers/media/dvb/frontends/
 # due to tuner-xc3028