drm/amd/display: Program DSC before enabling link

[why]
Link or DIG BE can't be exposed to a higher stream bandwidth than they
can handle. When DSC is required to fit the stream into the link
bandwidth, DSC has to be programmed before the link is enabled to ensure
this. Without it, intermittent issues such as black screen after S3 or a
hot-plug can be seen with DSC timings like 4k144Hz or 8k60Hz.

[how]
Move DSC programming from before enabling stream to before enabling link
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/core/dc_link.c

@@ -3035,6 +3035,18 @@ void core_link_enable_stream(
 		if (pipe_ctx->stream->dpms_off)
 			return;
 
+		/* Have to setup DSC before DIG FE and BE are connected (which happens before the
+		 * link training). This is to make sure the bandwidth sent to DIG BE won't be
+		 * bigger than what the link and/or DIG BE can handle. VBID[6]/CompressedStream_flag
+		 * will be automatically set at a later time when the video is enabled
+		 * (DP_VID_STREAM_EN = 1).
+		 */
+		if (pipe_ctx->stream->timing.flags.DSC) {
+			if (dc_is_dp_signal(pipe_ctx->stream->signal) ||
+					dc_is_virtual_signal(pipe_ctx->stream->signal))
+				dp_set_dsc_enable(pipe_ctx, true);
+		}
+
 		status = enable_link(state, pipe_ctx);
 
 		if (status != DC_OK) {
@@ -3062,11 +3074,6 @@ void core_link_enable_stream(
 					CONTROLLER_DP_TEST_PATTERN_VIDEOMODE,
 					COLOR_DEPTH_UNDEFINED);
 
-		if (pipe_ctx->stream->timing.flags.DSC) {
-			if (dc_is_dp_signal(pipe_ctx->stream->signal) ||
-					dc_is_virtual_signal(pipe_ctx->stream->signal))
-				dp_set_dsc_enable(pipe_ctx, true);
-		}
 		dc->hwss.enable_stream(pipe_ctx);
 
 		/* Set DPS PPS SDP (AKA "info frames") */