Merge tag 'renesas-sh73a0-multiplatform-for-v4.1' of...

Merge tag 'renesas-sh73a0-multiplatform-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/multiplatform

Merge "Renesas ARM Based SoC sh73a0 Multiplatform Updates for v4.1" from Simon
Horman:

* Add multiplatform support to sh73a0 and its kzm9g board
* Use Bus State Controller to enable ethernet for multiplatform sh73a0/kzm9g
* Add PM domain support to multiplatform sh73a0

* tag 'renesas-sh73a0-multiplatform-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (43 commits)
  ARM: shmobile: sh73a0: Remove restart callback
  ARM: shmobile: sh73a0 dtsi: Add PM domain support
  ARM: shmobile: sh73a0: Remove unused sh73a0_add_standard_devices_dt()
  ARM: shmobile: sh73a0 dtsi: Add Cortex-A9 TWD node
  ARM: shmobile: kzm9g-reference: Remove board C code and DT file
  ARM: shmobile: kzm9g dts: Move Ethernet node to BSC
  ARM: shmobile: sh73a0 dtsi: Add Bus State Controller node
  ARM: shmobile: kzm9g: Build DTS for Multiplatform
  ARM: shmobile: kzm9g dts: Sync with kzm9g-reference dts
  ARM: shmobile: sh73a0: Add Multiplatform support
  ARM: shmobile: sh73a0: Introduce generic setup callback
  ARM: shmobile: r8a7794: add SDHI DT support
  ARM: shmobile: r8a7790: add ADSP clocks
  ARM: shmobile: r8a7791: add ADSP clocks
  ARM: shmobile: henninger: add CAN0 DT support
  ARM: shmobile: r8a7791: add CAN DT support
  ARM: shmobile: r8a7791: add CAN clocks
  ARM: shmobile: r8a7790: add CAN DT support
  ARM: shmobile: r8a7790: add CAN clocks
  ARM: shmobile: emev2-kzm9d dts: Add PFC information for uart1
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/shmobile.txt

@@ -53,8 +53,6 @@ Boards:
     compatible = "renesas,kzm9d", "renesas,emev2"
   - Kyoto Microcomputer Co. KZM-A9-GT
     compatible = "renesas,kzm9g", "renesas,sh73a0"
-  - Kyoto Microcomputer Co. KZM-A9-GT - Reference Device Tree Implementation
-    compatible = "renesas,kzm9g-reference", "renesas,sh73a0"
   - Lager (RTP0RC7790SEB00010S)
     compatible = "renesas,lager", "renesas,r8a7790"
   - Marzen

arch/arm/boot/dts/Makefile

@@ -468,8 +468,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
 	r8a7778-bockw.dtb \
 	r8a7778-bockw-reference.dtb \
 	r8a7779-marzen.dtb \
-	sh73a0-kzm9g.dtb \
-	sh73a0-kzm9g-reference.dtb
+	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
@@ -480,7 +479,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7790-lager.dtb \
 	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
-	r8a7794-alt.dtb
+	r8a7794-alt.dtb \
+	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
 	socfpga_arria10_socdk.dtb \

arch/arm/boot/dts/emev2-kzm9d.dts

@@ -94,3 +94,16 @@ lan9220@20000000 {
 		vdd33a-supply = <&reg_3p3v>;
 	};
 };
+
+&pfc {
+	uart1_pins: uart@e1030000 {
+		renesas,groups = "uart1_ctrl", "uart1_data";
+		renesas,function = "uart1";
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};

arch/arm/boot/dts/emev2.dtsi

@@ -169,12 +169,18 @@ uart3: serial@e1050000 {
 		clock-names = "sclk";
 	};
 
+	pfc: pfc@e0140200 {
+		compatible = "renesas,pfc-emev2";
+		reg = <0xe0140200 0x100>;
+	};
+
 	gpio0: gpio@e0050000 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
 		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 68 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -186,6 +192,7 @@ gpio1: gpio@e0050080 {
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 70 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -197,6 +204,7 @@ gpio2: gpio@e0050100 {
 		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 72 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -208,6 +216,7 @@ gpio3: gpio@e0050180 {
 		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 74 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -219,6 +228,7 @@ gpio4: gpio@e0050200 {
 		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 76 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 128 31>;
 		#gpio-cells = <2>;
 		ngpios = <31>;
 		interrupt-controller;

arch/arm/boot/dts/r8a7740.dtsi

@@ -431,6 +431,18 @@ dv_clk: dv_clk {
 			clock-frequency = <27000000>;
 			clock-output-names = "dv";
 		};
+		fmsick_clk: fmsick_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "fmsick";
+		};
+		fmsock_clk: fmsock_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "fmsock";
+		};
 		fsiack_clk: fsiack_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -459,13 +471,78 @@ cpg_clocks: cpg_clocks@e6150000 {
 		};
 
 		/* Variable factor clocks (DIV6) */
+		vclk1_clk: vclk1_clk@e6150008 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150008 4>;
+			clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>,
+				 <&extal1_div2_clk>, <&extalr_clk>, <0>,
+				 <0>;
+			#clock-cells = <0>;
+			clock-output-names = "vclk1";
+		};
+		vclk2_clk: vclk2_clk@e615000c {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615000c 4>;
+			clocks = <&pllc1_div2_clk>, <0>, <&dv_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>,
+				 <&extal1_div2_clk>, <&extalr_clk>, <0>,
+				 <0>;
+			#clock-cells = <0>;
+			clock-output-names = "vclk2";
+		};
+		fmsi_clk: fmsi_clk@e6150010 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150010 4>;
+			clocks = <&pllc1_div2_clk>, <&fmsick_clk>, <0>, <0>;
+			#clock-cells = <0>;
+			clock-output-names = "fmsi";
+		};
+		fmso_clk: fmso_clk@e6150014 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150014 4>;
+			clocks = <&pllc1_div2_clk>, <&fmsock_clk>, <0>, <0>;
+			#clock-cells = <0>;
+			clock-output-names = "fmso";
+		};
+		fsia_clk: fsia_clk@e6150018 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150018 4>;
+			clocks = <&pllc1_div2_clk>, <&fsiack_clk>, <0>, <0>;
+			#clock-cells = <0>;
+			clock-output-names = "fsia";
+		};
 		sub_clk: sub_clk@e6150080 {
 			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0xe6150080 4>;
-			clocks = <&pllc1_div2_clk>;
+			clocks = <&pllc1_div2_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>;
 			#clock-cells = <0>;
 			clock-output-names = "sub";
 		};
+		spu_clk: spu_clk@e6150084 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150084 4>;
+			clocks = <&pllc1_div2_clk>,
+				 <&cpg_clocks R8A7740_CLK_USB24S>, <0>, <0>;
+			#clock-cells = <0>;
+			clock-output-names = "spu";
+		};
+		vou_clk: vou_clk@e6150088 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150088 4>;
+			clocks = <&pllc1_div2_clk>, <&extal1_clk>, <&dv_clk>,
+				 <0>;
+			#clock-cells = <0>;
+			clock-output-names = "vou";
+		};
+		stpro_clk: stpro_clk@e615009c {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615009c 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_PLLC0>;
+			#clock-cells = <0>;
+			clock-output-names = "stpro";
+		};
 
 		/* Fixed factor clocks */
 		pllc1_div2_clk: pllc1_div2_clk {

arch/arm/boot/dts/r8a7790.dtsi

@@ -792,6 +792,26 @@ du_out_lvds1: endpoint {
 		};
 	};
 
+	can0: can@e6e80000 {
+		compatible = "renesas,can-r8a7790";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
+			 <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
+	can1: can@e6e88000 {
+		compatible = "renesas,can-r8a7790";
+		reg = <0 0xe6e88000 0 0x1000>;
+		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
+			 <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -838,16 +858,34 @@ audio_clk_c: audio_clk_c {
 			clock-output-names = "audio_clk_c";
 		};
 
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+			clock-output-names = "usb_extal";
+		};
+
+		/* External CAN clock */
+		can_clk: can_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "can_clk";
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7790-cpg-clocks",
 				     "renesas,rcar-gen2-cpg-clocks";
 			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
+			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
 					     "lb", "qspi", "sdh", "sd0", "sd1",
-					     "z";
+					     "z", "rcan", "adsp";
 		};
 
 		/* Variable factor clocks */
@@ -1121,13 +1159,16 @@ R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
+			clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7790_CLK_ADSP>,
+				 <&extal_clk>, <&p_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1
-				R8A7790_CLK_THERMAL R8A7790_CLK_PWM
+				R8A7790_CLK_ADSP_MOD R8A7790_CLK_THERMAL
+				R8A7790_CLK_PWM
 			>;
-			clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
+			clock-output-names = "audmac0", "audmac1", "adsp_mod",
+					     "thermal", "pwm";
 		};
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1465,4 +1506,55 @@ rcar_sound,ssi {
 			ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
 		};
 	};
+
+	ipmmu_sy0: mmu@e6280000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6280000 0 0x1000>;
+		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_sy1: mmu@e6290000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6290000 0 0x1000>;
+		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_ds: mmu@e6740000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6740000 0 0x1000>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mp: mmu@ec680000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xec680000 0 0x1000>;
+		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mx: mmu@fe951000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xfe951000 0 0x1000>;
+		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_rt: mmu@ffc80000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xffc80000 0 0x1000>;
+		interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/r8a7791-henninger.dts

@@ -141,6 +141,11 @@ vin0_pins: vin0 {
 		renesas,groups = "vin0_data8", "vin0_clk";
 		renesas,function = "vin0";
 	};
+
+	can0_pins: can0 {
+		renesas,groups = "can0_data";
+		renesas,function = "can0";
+	};
 };
 
 &scif0 {
@@ -307,3 +312,9 @@ vin0ep: endpoint {
 		};
 	};
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -258,6 +258,17 @@ sndcodec: simple-audio-card,codec {
 			system-clock-frequency = <11289600>;
 		};
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
 };
 
 &du {
@@ -266,6 +277,11 @@ &du {
 	status = "okay";
 
 	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
 		port@1 {
 			lvds_connector: endpoint {
 			};
@@ -284,7 +300,7 @@ i2c2_pins: i2c2 {
 	};
 
 	du_pins: du {
-		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
+		renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0";
 		renesas,function = "du";
 	};
 
@@ -506,6 +522,38 @@ adv7180: endpoint {
 		};
 	};
 
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
 	eeprom@50 {
 		compatible = "renesas,24c02";
 		reg = <0x50>;

arch/arm/boot/dts/r8a7791.dtsi

@@ -816,6 +816,26 @@ du_out_lvds0: endpoint {
 		};
 	};
 
+	can0: can@e6e80000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
+	can1: can@e6e88000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e88000 0 0x1000>;
+		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -862,31 +882,50 @@ pcie_bus_clk: pcie_bus_clk {
 			status = "disabled";
 		};
 
+		/* External USB clock - can be overridden by the board */
+		usb_extal_clk: usb_extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <48000000>;
+			clock-output-names = "usb_extal";
+		};
+
+		/* External CAN clock */
+		can_clk: can_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "can_clk";
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7791-cpg-clocks",
 				     "renesas,rcar-gen2-cpg-clocks";
 			reg = <0 0xe6150000 0 0x1000>;
-			clocks = <&extal_clk>;
+			clocks = <&extal_clk &usb_extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "sdh", "sd0", "z";
+					     "lb", "qspi", "sdh", "sd0", "z",
+					     "rcan", "adsp";
 		};
 
 		/* Variable factor clocks */
-		sd1_clk: sd2_clk@e6150078 {
+		sd2_clk: sd2_clk@e6150078 {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150078 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd1";
+			clock-output-names = "sd2";
 		};
-		sd2_clk: sd3_clk@e615026c {
+		sd3_clk: sd3_clk@e615026c {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd2";
+			clock-output-names = "sd3";
 		};
 		mmc0_clk: mmc0_clk@e6150240 {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
@@ -1107,7 +1146,7 @@ R8A7791_CLK_SYS_DMAC1 R8A7791_CLK_SYS_DMAC0
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
+			clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
 				 <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
 				 <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
@@ -1125,13 +1164,16 @@ R8A7791_CLK_USBDMAC0 R8A7791_CLK_USBDMAC1
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
-			clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
+			clocks = <&hp_clk>, <&hp_clk>, <&cpg_clocks R8A7791_CLK_ADSP>,
+				 <&extal_clk>, <&p_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1
-				R8A7791_CLK_THERMAL R8A7791_CLK_PWM
+				R8A7791_CLK_ADSP_MOD R8A7791_CLK_THERMAL
+				R8A7791_CLK_PWM
 			>;
-			clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
+			clock-output-names = "audmac0", "audmac1", "adsp_mod",
+					     "thermal", "pwm";
 		};
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1384,6 +1426,66 @@ pciec: pcie@fe000000 {
 		status = "disabled";
 	};
 
+	ipmmu_sy0: mmu@e6280000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6280000 0 0x1000>;
+		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_sy1: mmu@e6290000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6290000 0 0x1000>;
+		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_ds: mmu@e6740000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6740000 0 0x1000>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mp: mmu@ec680000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xec680000 0 0x1000>;
+		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mx: mmu@fe951000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xfe951000 0 0x1000>;
+		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_rt: mmu@ffc80000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xffc80000 0 0x1000>;
+		interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_gp: mmu@e62a0000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe62a0000 0 0x1000>;
+		interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 261 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
 	rcar_sound: rcar_sound@ec500000 {
 		/*
 		 * #sound-dai-cells is required

arch/arm/boot/dts/r8a7794-alt.dts

@@ -43,6 +43,19 @@ &cmt0 {
 	status = "okay";
 };
 
+&ether {
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
 &scif2 {
 	status = "okay";
 };

arch/arm/boot/dts/r8a7794.dtsi

@@ -107,6 +107,66 @@ irqc0: interrupt-controller@e61c0000 {
 			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	dmac0: dma-controller@e6700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6700000 0 0x20000>;
+		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+			      0 200 IRQ_TYPE_LEVEL_HIGH
+			      0 201 IRQ_TYPE_LEVEL_HIGH
+			      0 202 IRQ_TYPE_LEVEL_HIGH
+			      0 203 IRQ_TYPE_LEVEL_HIGH
+			      0 204 IRQ_TYPE_LEVEL_HIGH
+			      0 205 IRQ_TYPE_LEVEL_HIGH
+			      0 206 IRQ_TYPE_LEVEL_HIGH
+			      0 207 IRQ_TYPE_LEVEL_HIGH
+			      0 208 IRQ_TYPE_LEVEL_HIGH
+			      0 209 IRQ_TYPE_LEVEL_HIGH
+			      0 210 IRQ_TYPE_LEVEL_HIGH
+			      0 211 IRQ_TYPE_LEVEL_HIGH
+			      0 212 IRQ_TYPE_LEVEL_HIGH
+			      0 213 IRQ_TYPE_LEVEL_HIGH
+			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	dmac1: dma-controller@e6720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6720000 0 0x20000>;
+		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+			      0 216 IRQ_TYPE_LEVEL_HIGH
+			      0 217 IRQ_TYPE_LEVEL_HIGH
+			      0 218 IRQ_TYPE_LEVEL_HIGH
+			      0 219 IRQ_TYPE_LEVEL_HIGH
+			      0 308 IRQ_TYPE_LEVEL_HIGH
+			      0 309 IRQ_TYPE_LEVEL_HIGH
+			      0 310 IRQ_TYPE_LEVEL_HIGH
+			      0 311 IRQ_TYPE_LEVEL_HIGH
+			      0 312 IRQ_TYPE_LEVEL_HIGH
+			      0 313 IRQ_TYPE_LEVEL_HIGH
+			      0 314 IRQ_TYPE_LEVEL_HIGH
+			      0 315 IRQ_TYPE_LEVEL_HIGH
+			      0 316 IRQ_TYPE_LEVEL_HIGH
+			      0 317 IRQ_TYPE_LEVEL_HIGH
+			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
 	scifa0: serial@e6c40000 {
 		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
@@ -269,6 +329,41 @@ hscif2: serial@e62d0000 {
 		status = "disabled";
 	};
 
+	ether: ethernet@ee700000 {
+		compatible = "renesas,ether-r8a7794";
+		reg = <0 0xee700000 0 0x400>;
+		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
+		phy-mode = "rmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	sdhi0: sd@ee100000 {
+		compatible = "renesas,sdhi-r8a7794";
+		reg = <0 0xee100000 0 0x200>;
+		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+		status = "disabled";
+	};
+
+	sdhi1: sd@ee140000 {
+		compatible = "renesas,sdhi-r8a7794";
+		reg = <0 0xee140000 0 0x100>;
+		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ee160000 {
+		compatible = "renesas,sdhi-r8a7794";
+		reg = <0 0xee160000 0 0x100>;
+		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -294,19 +389,19 @@ cpg_clocks: cpg_clocks@e6150000 {
 					     "lb", "qspi", "sdh", "sd0", "z";
 		};
 		/* Variable factor clocks */
-		sd1_clk: sd2_clk@e6150078 {
+		sd2_clk: sd2_clk@e6150078 {
 			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150078 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd1";
+			clock-output-names = "sd2";
 		};
-		sd2_clk: sd3_clk@e615007c {
+		sd3_clk: sd3_clk@e615026c {
 			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
-			reg = <0 0xe615007c 0 4>;
+			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd2";
+			clock-output-names = "sd3";
 		};
 		mmc0_clk: mmc0_clk@e6150240 {
 			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
@@ -518,7 +613,7 @@ R8A7794_CLK_SYS_DMAC1 R8A7794_CLK_SYS_DMAC0
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
+			clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
 			         <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
@@ -585,4 +680,54 @@ R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5
 			clock-output-names = "scifa3", "scifa4", "scifa5";
 		};
 	};
+
+	ipmmu_sy0: mmu@e6280000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6280000 0 0x1000>;
+		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_sy1: mmu@e6290000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6290000 0 0x1000>;
+		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_ds: mmu@e6740000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6740000 0 0x1000>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+	};
+
+	ipmmu_mp: mmu@ec680000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xec680000 0 0x1000>;
+		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mx: mmu@fe951000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xfe951000 0 0x1000>;
+		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+	};
+
+	ipmmu_gp: mmu@e62a0000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe62a0000 0 0x1000>;
+		interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 261 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/sh73a0-kzm9g-reference.dts

-/*
- * Device Tree Source for the KZM-A9-GT board
- *
- * Copyright (C) 2012 Horms Solutions Ltd.
- *
- * Based on sh73a0-kzm9g.dts
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "sh73a0.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "KZM-A9-GT";
-	compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
-
-	aliases {
-		serial4 = &scifa4;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd_dvfs>;
-			operating-points = <
-				/* kHz  uV */
-				1196000 1315000
-				 598000 1175000
-				 398667 1065000
-			>;
-			voltage-tolerance = <1>; /* 1% */
-		};
-	};
-
-	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
-		stdout-path = &scifa4;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x41000000 0x1e800000>;
-	};
-
-	reg_1p8v: regulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	reg_3p3v: regulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vmmc_sdhi0: regulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vmmc_sdhi2: regulator@3 {
-		compatible = "regulator-fixed";
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	lan9220@10000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x10000000 0x100>;
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin0>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		smsc,irq-push-pull;
-		smsc,save-mac-address;
-		vddvario-supply = <&reg_1p8v>;
-		vdd33a-supply = <&reg_3p3v>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
-			label = "LED1";
-		};
-		led2 {
-			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
-			label = "LED2";
-		};
-		led3 {
-			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
-			label = "LED3";
-		};
-		led4 {
-			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
-			label = "LED4";
-		};
-	};
-
-	keyboard {
-		compatible = "gpio-keys";
-
-		back-key {
-			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_BACK>;
-			label = "SW3";
-		};
-
-		right-key {
-			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RIGHT>;
-			label = "SW2-R";
-		};
-
-		left-key {
-			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_LEFT>;
-			label = "SW2-L";
-		};
-
-		enter-key {
-			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_ENTER>;
-			label = "SW2-P";
-		};
-
-		up-key {
-			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_UP>;
-			label = "SW2-U";
-		};
-
-		down-key {
-			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_DOWN>;
-			label = "SW2-D";
-		};
-
-		home-key {
-			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_HOME>;
-			label = "SW1";
-		};
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "left_j";
-		simple-audio-card,cpu {
-			sound-dai = <&sh_fsi2 0>;
-		};
-		simple-audio-card,codec {
-			sound-dai = <&ak4648>;
-			bitclock-master;
-			frame-master;
-			system-clock-frequency = <11289600>;
-		};
-	};
-};
-
-&cmt1 {
-	status = "okay";
-};
-
-&extal2_clk {
-	clock-frequency = <48000000>;
-};
-
-&i2c0 {
-	status = "okay";
-	as3711@40 {
-		compatible = "ams,as3711";
-		reg = <0x40>;
-
-		regulators {
-			vdd_dvfs: sd1 {
-				regulator-name = "1.315V CPU";
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			sd2 {
-				regulator-name = "1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			sd4 {
-				regulator-name = "1.215V";
-				regulator-min-microvolt = <1215000>;
-				regulator-max-microvolt = <1235000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo2 {
-				regulator-name = "2.8V CPU";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo3 {
-				regulator-name = "3.0V CPU";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo4 {
-				regulator-name = "2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo5 {
-				regulator-name = "2.8V #2";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo7 {
-				regulator-name = "1.15V CPU";
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-			ldo8 {
-				regulator-name = "1.15V CPU #2";
-				regulator-min-microvolt = <1150000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-
-	ak4648: ak4648@12 {
-		#sound-dai-cells = <0>;
-		compatible = "asahi-kasei,ak4648";
-		reg = <0x12>;
-	};
-};
-
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	pcf8575: gpio@20 {
-		compatible = "nxp,pcf8575";
-		reg = <0x20>;
-		interrupt-parent = <&irqpin2>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&mmcif {
-	pinctrl-0 = <&mmcif_pins>;
-	pinctrl-names = "default";
-
-	bus-width = <8>;
-	vmmc-supply = <&reg_1p8v>;
-	status = "okay";
-};
-
-&pfc {
-	i2c3_pins: i2c3 {
-		renesas,groups = "i2c3_1";
-		renesas,function = "i2c3";
-	};
-
-	mmcif_pins: mmc {
-		mux {
-			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
-			renesas,function = "mmc0";
-		};
-		cfg {
-			renesas,groups = "mmc0_data8_0";
-			renesas,pins = "PORT279";
-			bias-pull-up;
-		};
-	};
-
-	scifa4_pins: serial4 {
-		renesas,groups = "scifa4_data", "scifa4_ctrl";
-		renesas,function = "scifa4";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	fsia_pins: sounda {
-		renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
-				 "fsia_data_in", "fsia_data_out";
-		renesas,function = "fsia";
-	};
-};
-
-&scifa4 {
-	pinctrl-0 = <&scifa4_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vmmc_sdhi0>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vmmc_sdhi2>;
-	bus-width = <4>;
-	broken-cd;
-	status = "okay";
-};
-
-&sh_fsi2 {
-	pinctrl-0 = <&fsia_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};

arch/arm/boot/dts/sh73a0-kzm9g.dts

 /*
  * Device Tree Source for the KZM-A9-GT board
  *
+ * Copyright (C) 2012 Horms Solutions Ltd.
+ *
+ * Based on sh73a0-kzm9g.dts
  * Copyright (C) 2012 Renesas Solutions Corp.
  *
  * This file is licensed under the terms of the GNU General Public License
@@ -10,17 +13,388 @@
 
 /dts-v1/;
 #include "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "KZM-A9-GT";
 	compatible = "renesas,kzm9g", "renesas,sh73a0";
 
+	aliases {
+		serial4 = &scifa4;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd_dvfs>;
+			operating-points = <
+				/* kHz  uV */
+				1196000 1315000
+				 598000 1175000
+				 398667 1065000
+			>;
+			voltage-tolerance = <1>; /* 1% */
+		};
+	};
+
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
+		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
+		stdout-path = &scifa4;
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <0x41000000 0x1e800000>;
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vmmc_sdhi0: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vmmc_sdhi2: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+			label = "LED1";
+		};
+		led2 {
+			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+			label = "LED2";
+		};
+		led3 {
+			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+			label = "LED3";
+		};
+		led4 {
+			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+			label = "LED4";
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		back-key {
+			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "SW3";
+		};
+
+		right-key {
+			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+			label = "SW2-R";
+		};
+
+		left-key {
+			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+			label = "SW2-L";
+		};
+
+		enter-key {
+			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			label = "SW2-P";
+		};
+
+		up-key {
+			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+			label = "SW2-U";
+		};
+
+		down-key {
+			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+			label = "SW2-D";
+		};
+
+		home-key {
+			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "SW1";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "left_j";
+		simple-audio-card,cpu {
+			sound-dai = <&sh_fsi2 0>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&ak4648>;
+			bitclock-master;
+			frame-master;
+			system-clock-frequency = <11289600>;
+		};
+	};
+};
+
+&bsc {
+	ethernet@10000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x10000000 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin0>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reg-io-width = <4>;
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
+};
+
+&cmt1 {
+	status = "okay";
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	compass@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+		interrupt-parent = <&irqpin3>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	ak4648: codec@12 {
+		compatible = "asahi-kasei,ak4648";
+		reg = <0x12>;
+		#sound-dai-cells = <0>;
+	};
+
+	accelerometer@1d {
+		compatible = "adi,adxl34x";
+		reg = <0x1d>;
+		interrupt-parent = <&irqpin3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+			     <3 IRQ_TYPE_LEVEL_HIGH>;
 	};
+
+	rtc@32 {
+		compatible = "ricoh,r2025sd";
+		reg = <0x32>;
+	};
+
+	as3711@40 {
+		compatible = "ams,as3711";
+		reg = <0x40>;
+
+		regulators {
+			vdd_dvfs: sd1 {
+				regulator-name = "1.315V CPU";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			sd2 {
+				regulator-name = "1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			sd4 {
+				regulator-name = "1.215V";
+				regulator-min-microvolt = <1215000>;
+				regulator-max-microvolt = <1235000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo2 {
+				regulator-name = "2.8V CPU";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo3 {
+				regulator-name = "3.0V CPU";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo4 {
+				regulator-name = "2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo5 {
+				regulator-name = "2.8V #2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo7 {
+				regulator-name = "1.15V CPU";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo8 {
+				regulator-name = "1.15V CPU #2";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	touchscreen@55 {
+		compatible = "sitronix,st1232";
+		reg = <0x55>;
+		interrupt-parent = <&irqpin1>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcf8575: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		interrupt-parent = <&irqpin2>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mmcif {
+	pinctrl-0 = <&mmcif_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	vmmc-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&pfc {
+	i2c3_pins: i2c3 {
+		renesas,groups = "i2c3_1";
+		renesas,function = "i2c3";
+	};
+
+	mmcif_pins: mmc {
+		mux {
+			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+			renesas,function = "mmc0";
+		};
+		cfg {
+			renesas,groups = "mmc0_data8_0";
+			renesas,pins = "PORT279";
+			bias-pull-up;
+		};
+	};
+
+	scifa4_pins: serial4 {
+		renesas,groups = "scifa4_data", "scifa4_ctrl";
+		renesas,function = "scifa4";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	fsia_pins: sounda {
+		renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
+				 "fsia_data_in", "fsia_data_out";
+		renesas,function = "fsia";
+	};
+};
+
+&scifa4 {
+	pinctrl-0 = <&scifa4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi2>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&sh_fsi2 {
+	pinctrl-0 = <&fsia_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
 };

arch/arm/mach-shmobile/Kconfig

@@ -82,6 +82,11 @@ config ARCH_R8A7794
 	bool "R-Car E2 (R8A77940)"
 	select ARCH_RCAR_GEN2
 
+config ARCH_SH73A0
+	bool "SH-Mobile AG5 (R8A73A00)"
+	select ARCH_RMOBILE
+	select RENESAS_INTC_IRQPIN
+
 comment "Renesas ARM SoCs Board Type"
 
 config MACH_MARZEN
@@ -172,20 +177,6 @@ config MACH_KZM9G
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select USE_OF
 
-config MACH_KZM9G_REFERENCE
-	bool "KZM-A9-GT board - Reference Device Tree Implementation"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-	select USE_OF
-	---help---
-	   Use reference implementation of KZM-A9-GT board support
-	   which makes as greater use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
 comment "Renesas ARM SoCs System Configuration"
 
 config CPU_HAS_INTEVT

arch/arm/mach-shmobile/Makefile

@@ -6,7 +6,7 @@
 obj-y				:= timer.o console.o
 
 # CPU objects
-obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o intc-sh73a0.o pm-sh73a0.o
+obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o pm-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o
 obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o pm-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o
@@ -56,8 +56,7 @@ obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
 obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
-obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
-obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
+obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o intc-sh73a0.o
 endif
 
 # Framework support

arch/arm/mach-shmobile/Makefile.boot

@@ -4,7 +4,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
-loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
 
 __ZRELADDR	:= $(sort $(loadaddr-y))

arch/arm/mach-shmobile/board-kzm9g-reference.c

-/*
- * KZM-A9-GT board support - Reference Device Tree Implementation
- *
- * Copyright (C) 2012	Horms Solutions Ltd.
- *
- * Based on board-kzm9g.c
- * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/of_platform.h>
-
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "sh73a0.h"
-
-static void __init kzm_init(void)
-{
-	sh73a0_add_standard_devices_dt();
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
-#endif
-}
-
-#define RESCNT2 IOMEM(0xe6188020)
-static void kzm9g_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
-}
-
-static const char *kzm9g_boards_compat_dt[] __initdata = {
-	"renesas,kzm9g-reference",
-	NULL,
-};
-
-DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= shmobile_init_delay,
-	.init_machine	= kzm_init,
-	.init_late	= shmobile_init_late,
-	.restart	= kzm9g_restart,
-	.dt_compat	= kzm9g_boards_compat_dt,
-MACHINE_END

arch/arm/mach-shmobile/include/mach/zboot.h

@@ -9,7 +9,7 @@
  *
  **************************************************/
 
-#if defined(CONFIG_MACH_KZM9G) || defined(CONFIG_MACH_KZM9G_REFERENCE)
+#ifdef CONFIG_MACH_KZM9G
 #define MEMORY_START	0x43000000
 #include "mach/head-kzm9g.txt"
 #else

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -30,6 +30,7 @@
 #include <linux/platform_data/sh_ipmmu.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 
+#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -784,22 +785,15 @@ void __init sh73a0_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-void __init sh73a0_add_standard_devices_dt(void)
+static void __init sh73a0_generic_init(void)
 {
-	/* clocks are setup late during boot in the case of DT */
-#ifndef CONFIG_COMMON_CLK
-	sh73a0_clock_init();
+#ifdef CONFIG_CACHE_L2X0
+	/* Shared attribute override enable, 64K*8way */
+	l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff);
 #endif
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-#define RESCNT2 IOMEM(0xe6188020)
-static void sh73a0_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
-}
-
 static const char *sh73a0_boards_compat_dt[] __initdata = {
 	"renesas,sh73a0",
 	NULL,
@@ -809,9 +803,8 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.smp		= smp_ops(sh73a0_smp_ops),
 	.map_io		= sh73a0_map_io,
 	.init_early	= shmobile_init_delay,
-	.init_machine	= sh73a0_add_standard_devices_dt,
+	.init_machine	= sh73a0_generic_init,
 	.init_late	= shmobile_init_late,
-	.restart	= sh73a0_restart,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */

arch/arm/mach-shmobile/sh73a0.h

@@ -77,7 +77,6 @@ extern void sh73a0_map_io(void);
 extern void sh73a0_earlytimer_init(void);
 extern void sh73a0_add_early_devices(void);
 extern void sh73a0_add_standard_devices(void);
-extern void sh73a0_add_standard_devices_dt(void);
 extern void sh73a0_clock_init(void);
 extern void sh73a0_pinmux_init(void);
 extern void sh73a0_pm_init(void);

arch/arm/mach-shmobile/smp-r8a7790.c

@@ -37,11 +37,11 @@ static struct rcar_sysc_ch r8a7790_ca7_scu = {
 
 static struct rcar_apmu_config r8a7790_apmu_config[] = {
 	{
-		.iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+		.iomem = DEFINE_RES_MEM(0xe6152000, 0x188),
 		.cpus = { 0, 1, 2, 3 },
 	},
 	{
-		.iomem = DEFINE_RES_MEM(0xe6151000, 0x88),
+		.iomem = DEFINE_RES_MEM(0xe6151000, 0x188),
 		.cpus = { 0x100, 0x0101, 0x102, 0x103 },
 	}
 };

arch/arm/mach-shmobile/smp-r8a7791.c

@@ -27,7 +27,7 @@
 
 static struct rcar_apmu_config r8a7791_apmu_config[] = {
 	{
-		.iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+		.iomem = DEFINE_RES_MEM(0xe6152000, 0x188),
 		.cpus = { 0, 1 },
 	}
 };

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -33,7 +33,7 @@
 
 #define SH73A0_SCU_BASE 0xf0000000
 
-#ifdef CONFIG_HAVE_ARM_TWD
+#if defined(CONFIG_HAVE_ARM_TWD) && !defined(CONFIG_ARCH_MULTIPLATFORM)
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, SH73A0_SCU_BASE + 0x600, 29);
 void __init sh73a0_register_twd(void)
 {

include/dt-bindings/clock/r8a7790-clock.h

@@ -21,6 +21,8 @@
 #define R8A7790_CLK_SD0			7
 #define R8A7790_CLK_SD1			8
 #define R8A7790_CLK_Z			9
+#define R8A7790_CLK_RCAN		10
+#define R8A7790_CLK_ADSP		11
 
 /* MSTP0 */
 #define R8A7790_CLK_MSIOF0		0
@@ -80,6 +82,7 @@
 /* MSTP5 */
 #define R8A7790_CLK_AUDIO_DMAC1		1
 #define R8A7790_CLK_AUDIO_DMAC0		2
+#define R8A7790_CLK_ADSP_MOD		6
 #define R8A7790_CLK_THERMAL		22
 #define R8A7790_CLK_PWM			23
 

include/dt-bindings/clock/r8a7791-clock.h

@@ -20,6 +20,8 @@
 #define R8A7791_CLK_SDH			6
 #define R8A7791_CLK_SD0			7
 #define R8A7791_CLK_Z			8
+#define R8A7791_CLK_RCAN		9
+#define R8A7791_CLK_ADSP		10
 
 /* MSTP0 */
 #define R8A7791_CLK_MSIOF0		0
@@ -71,6 +73,7 @@
 /* MSTP5 */
 #define R8A7791_CLK_AUDIO_DMAC1		1
 #define R8A7791_CLK_AUDIO_DMAC0		2
+#define R8A7791_CLK_ADSP_MOD		6
 #define R8A7791_CLK_THERMAL		22
 #define R8A7791_CLK_PWM			23
 

include/dt-bindings/clock/sh73a0-clock.h

@@ -76,4 +76,7 @@
 #define SH73A0_CLK_IIC4		10
 #define SH73A0_CLK_KEYSC	3
 
+/* MSTP5 */
+#define SH73A0_CLK_INTCA0	8
+
 #endif