bna: Firmware Patch Simplification

This patch includes change to enable firmware patch simplication feature.
This feature is targeted to address the requirement to have independent patch
release for firmware. Prior to the 3.2.3.0 firmware, releasing a patch fix for
firmware would require changes to bna driver, to use new firmware images.
However with these changes, if the new firmware is flashed on to the Adapter,
the driver will use the new firmware after checking the patch release byte in
the firmware version.

Update the f/w version to 3.2.3.0
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/brocade/bna/bfa_ioc.h

@@ -298,6 +298,7 @@ void bfa_nw_ioc_error_isr(struct bfa_ioc *ioc);
 bool bfa_nw_ioc_is_disabled(struct bfa_ioc *ioc);
 bool bfa_nw_ioc_is_operational(struct bfa_ioc *ioc);
 void bfa_nw_ioc_get_attr(struct bfa_ioc *ioc, struct bfa_ioc_attr *ioc_attr);
+enum bfa_status bfa_nw_ioc_fwsig_invalidate(struct bfa_ioc *ioc);
 void bfa_nw_ioc_notify_register(struct bfa_ioc *ioc,
 	struct bfa_ioc_notify *notify);
 bool bfa_nw_ioc_sem_get(void __iomem *sem_reg);

drivers/net/ethernet/brocade/bna/bfi.h

@@ -25,6 +25,7 @@
 /* BFI FW image type */
 #define	BFI_FLASH_CHUNK_SZ			256	/*!< Flash chunk size */
 #define	BFI_FLASH_CHUNK_SZ_WORDS	(BFI_FLASH_CHUNK_SZ/sizeof(u32))
+#define BFI_FLASH_IMAGE_SZ		0x100000
 
 /* Msg header common to all msgs */
 struct bfi_mhdr {
@@ -233,7 +234,29 @@ struct bfi_ioc_getattr_reply {
 #define BFI_IOC_TRC_HDR_SZ	32
 
 #define BFI_IOC_FW_SIGNATURE	(0xbfadbfad)
+#define BFI_IOC_FW_INV_SIGN	(0xdeaddead)
 #define BFI_IOC_MD5SUM_SZ	4
+
+struct bfi_ioc_fwver {
+#ifdef __BIG_ENDIAN
+	u8 patch;
+	u8 maint;
+	u8 minor;
+	u8 major;
+	u8 rsvd[2];
+	u8 build;
+	u8 phase;
+#else
+	u8 major;
+	u8 minor;
+	u8 maint;
+	u8 patch;
+	u8 phase;
+	u8 build;
+	u8 rsvd[2];
+#endif
+};
+
 struct bfi_ioc_image_hdr {
 	u32	signature;	/*!< constant signature */
 	u8	asic_gen;	/*!< asic generation */
@@ -242,10 +265,18 @@ struct bfi_ioc_image_hdr {
 	u8	port1_mode;	/*!< device mode for port 1 */
 	u32	exec;		/*!< exec vector	*/
 	u32	bootenv;	/*!< firmware boot env */
-	u32	rsvd_b[4];
+	u32	rsvd_b[2];
+	struct bfi_ioc_fwver fwver;
 	u32	md5sum[BFI_IOC_MD5SUM_SZ];
 };
 
+enum bfi_ioc_img_ver_cmp {
+	BFI_IOC_IMG_VER_INCOMP,
+	BFI_IOC_IMG_VER_OLD,
+	BFI_IOC_IMG_VER_SAME,
+	BFI_IOC_IMG_VER_BETTER
+};
+
 #define BFI_FWBOOT_DEVMODE_OFF		4
 #define BFI_FWBOOT_TYPE_OFF		8
 #define BFI_FWBOOT_ENV_OFF		12

drivers/net/ethernet/brocade/bna/cna.h

@@ -37,8 +37,8 @@
 
 extern char bfa_version[];
 
-#define CNA_FW_FILE_CT	"ctfw-3.2.1.1.bin"
-#define CNA_FW_FILE_CT2	"ct2fw-3.2.1.1.bin"
+#define CNA_FW_FILE_CT	"ctfw-3.2.3.0.bin"
+#define CNA_FW_FILE_CT2	"ct2fw-3.2.3.0.bin"
 #define FC_SYMNAME_MAX	256	/*!< max name server symbolic name size */
 
 #pragma pack(1)