Skip to content

L
linux
Commit c117d05c authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab
Browse files
Options

V4L/DVB (7753): saa7134: fix tuner setup 

Tuner setup were happening during i2c attach callback. This means that it would
happen on two conditions:

        1) if tuner module weren't load, it will happen at request_module("tuner");

        2) if tuner is not compiled as a module, or it is already loaded
           (for example, on setups with more than one tuner), it will happen
           when saa7134 registers I2C bus.

Due to that, if tuner were loaded, tuner setup will happen _before_ reading
the proper values at tuner eeprom. Since set_addr refuses to change for a tuner
that were previously defined (except if the tuner_addr is set), this were
making eeprom tuner detection useless.

This patch removes tuner type setup from saa7134-i2c, moving it to the proper
place, after taking eeprom into account.
Reviewed-by: default avatarHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 397be5c4
Hide whitespace changes
Inline Side-by-side
Showing with 117 additions and 143 deletions
drivers/media/video/saa7134/saa7134-cards.c
View file @ c117d05c
......@@ -47,6 +47,9 @@ static char name_svideo[] = "S-Video";
/* ------------------------------------------------------------------ */
/* board config info */
/* If radio_type !=UNSET, radio_addr should be specified
*/
struct saa7134_board saa7134_boards[] = {
[SAA7134_BOARD_UNKNOWN] = {
.name = "UNKNOWN/GENERIC",
......@@ -3087,7 +3090,7 @@ struct saa7134_board saa7134_boards[] = {
.tuner_type = TUNER_PHILIPS_TD1316, /* untested */
.radio_type = TUNER_TEA5767, /* untested */
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.radio_addr = 0x60,
.tda9887_conf = TDA9887_PRESENT,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
......@@ -5577,20 +5580,87 @@ int saa7134_board_init1(struct saa7134_dev *dev)
return 0;
}
static void saa7134_tuner_setup(struct saa7134_dev *dev)
{
struct tuner_setup tun_setup;
unsigned int mode_mask = T_RADIO |
T_ANALOG_TV |
T_DIGITAL_TV;
memset(&tun_setup, 0, sizeof(tun_setup));
tun_setup.tuner_callback = saa7134_tuner_callback;
if (saa7134_boards[dev->board].radio_type != UNSET) {
tun_setup.type = saa7134_boards[dev->board].radio_type;
tun_setup.addr = saa7134_boards[dev->board].radio_addr;
tun_setup.mode_mask = T_RADIO;
saa7134_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
mode_mask &= ~T_RADIO;
}
if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type != UNSET)) {
tun_setup.type = dev->tuner_type;
tun_setup.addr = dev->tuner_addr;
tun_setup.config = saa7134_boards[dev->board].tuner_config;
tun_setup.tuner_callback = saa7134_tuner_callback;
tun_setup.mode_mask = mode_mask;
saa7134_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
}
if (dev->tda9887_conf) {
struct v4l2_priv_tun_config tda9887_cfg;
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &dev->tda9887_conf;
saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG,
&tda9887_cfg);
}
if (dev->tuner_type == TUNER_XC2028) {
struct v4l2_priv_tun_config xc2028_cfg;
struct xc2028_ctrl ctl;
memset(&xc2028_cfg, 0, sizeof(ctl));
memset(&ctl, 0, sizeof(ctl));
ctl.fname = XC2028_DEFAULT_FIRMWARE;
ctl.max_len = 64;
switch (dev->board) {
case SAA7134_BOARD_AVERMEDIA_A16D:
ctl.demod = XC3028_FE_ZARLINK456;
break;
default:
ctl.demod = XC3028_FE_OREN538;
ctl.mts = 1;
}
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv = &ctl;
saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
}
}
/* stuff which needs working i2c */
int saa7134_board_init2(struct saa7134_dev *dev)
{
unsigned char buf;
int board;
struct tuner_setup tun_setup;
tun_setup.config = 0;
tun_setup.tuner_callback = saa7134_tuner_callback;
dev->tuner_type = saa7134_boards[dev->board].tuner_type;
dev->tuner_addr = saa7134_boards[dev->board].tuner_addr;
switch (dev->board) {
case SAA7134_BOARD_BMK_MPEX_NOTUNER:
case SAA7134_BOARD_BMK_MPEX_TUNER:
dev->i2c_client.addr = 0x60;
board = (i2c_master_recv(&dev->i2c_client,&buf,0) < 0)
board = (i2c_master_recv(&dev->i2c_client, &buf, 0) < 0)
? SAA7134_BOARD_BMK_MPEX_NOTUNER
: SAA7134_BOARD_BMK_MPEX_TUNER;
if (board == dev->board)
......@@ -5600,21 +5670,9 @@ int saa7134_board_init2(struct saa7134_dev *dev)
saa7134_boards[dev->board].name);
dev->tuner_type = saa7134_boards[dev->board].tuner_type;
if (TUNER_ABSENT != dev->tuner_type) {
tun_setup.mode_mask = T_RADIO |
T_ANALOG_TV |
T_DIGITAL_TV;
tun_setup.type = dev->tuner_type;
tun_setup.addr = ADDR_UNSET;
tun_setup.tuner_callback = saa7134_tuner_callback;
saa7134_i2c_call_clients(dev,
TUNER_SET_TYPE_ADDR,
&tun_setup);
}
break;
case SAA7134_BOARD_MD7134:
{
{
u8 subaddr;
u8 data[3];
int ret, tuner_t;
......@@ -5667,30 +5725,8 @@ int saa7134_board_init2(struct saa7134_dev *dev)
}
printk(KERN_INFO "%s Tuner type is %d\n", dev->name, dev->tuner_type);
if (dev->tuner_type == TUNER_PHILIPS_FMD1216ME_MK3) {
struct v4l2_priv_tun_config tda9887_cfg;
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &dev->tda9887_conf;
dev->tda9887_conf = TDA9887_PRESENT |
TDA9887_PORT1_ACTIVE |
TDA9887_PORT2_ACTIVE;
saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG,
&tda9887_cfg);
}
tun_setup.mode_mask = T_RADIO |
T_ANALOG_TV |
T_DIGITAL_TV;
tun_setup.type = dev->tuner_type;
tun_setup.addr = ADDR_UNSET;
saa7134_i2c_call_clients(dev,
TUNER_SET_TYPE_ADDR, &tun_setup);
}
break;
}
case SAA7134_BOARD_PHILIPS_EUROPA:
if (dev->autodetected && (dev->eedata[0x41] == 0x1c)) {
/* Reconfigure board as Snake reference design */
......@@ -5702,43 +5738,43 @@ int saa7134_board_init2(struct saa7134_dev *dev)
}
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
{
/* The Philips EUROPA based hybrid boards have the tuner connected through
* the channel decoder. We have to make it transparent to find it
*/
{
u8 data[] = { 0x07, 0x02};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
tun_setup.type = dev->tuner_type;
tun_setup.addr = dev->tuner_addr;
saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
}
break;
}
case SAA7134_BOARD_PHILIPS_TIGER:
case SAA7134_BOARD_PHILIPS_TIGER_S:
{
{
u8 data[] = { 0x3c, 0x33, 0x60};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
if(dev->autodetected && (dev->eedata[0x49] == 0x50)) {
if (dev->autodetected && (dev->eedata[0x49] == 0x50)) {
dev->board = SAA7134_BOARD_PHILIPS_TIGER_S;
printk(KERN_INFO "%s: Reconfigured board as %s\n",
dev->name, saa7134_boards[dev->board].name);
}
if(dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) {
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
tun_setup.type = TUNER_PHILIPS_TDA8290;
tun_setup.addr = 0x4b;
tun_setup.config = 2;
if (dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) {
dev->tuner_type = TUNER_PHILIPS_TDA8290;
saa7134_tuner_setup(dev);
saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
data[2] = 0x68;
i2c_transfer(&dev->i2c_adap, &msg, 1);
/* Tuner setup is handled before I2C transfer.
Due to that, there's no need to do it later
*/
return 0;
}
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
}
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
hauppauge_eeprom(dev, dev->eedata+0x80);
/* break intentionally omitted */
......@@ -5751,52 +5787,55 @@ int saa7134_board_init2(struct saa7134_dev *dev)
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
case SAA7134_BOARD_CREATIX_CTX953:
{
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
{
u8 data[] = { 0x3c, 0x33, 0x60};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
}
case SAA7134_BOARD_FLYDVB_TRIO:
{
{
u8 data[] = { 0x3c, 0x33, 0x62};
struct i2c_msg msg = {.addr=0x09, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
}
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
{
/* initialize analog mode */
{
u8 data[] = { 0x3c, 0x33, 0x6a};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
}
case SAA7134_BOARD_CINERGY_HT_PCMCIA:
case SAA7134_BOARD_CINERGY_HT_PCI:
{
/* initialize analog mode */
{
u8 data[] = { 0x3c, 0x33, 0x68};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
}
break;
}
case SAA7134_BOARD_KWORLD_ATSC110:
{
/* enable tuner */
int i;
static const u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 };
dev->i2c_client.addr = 0x0a;
for (i = 0; i < 5; i++)
if (2 != i2c_master_send(&dev->i2c_client,&buffer[i*2],2))
printk(KERN_WARNING "%s: Unable to enable tuner(%i).\n",
dev->name, i);
}
{
/* enable tuner */
int i;
static const u8 buffer [] = { 0x10, 0x12, 0x13, 0x04, 0x16,
0x00, 0x14, 0x04, 0x17, 0x00 };
dev->i2c_client.addr = 0x0a;
for (i = 0; i < 5; i++)
if (2 != i2c_master_send(&dev->i2c_client,
&buffer[i*2], 2))
printk(KERN_WARNING
"%s: Unable to enable tuner(%i).\n",
dev->name, i);
break;
}
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
/* The T200 and the T200A share the same pci id. Consequently,
......@@ -5821,7 +5860,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
}
break;
case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
{
{
struct v4l2_priv_tun_config tea5767_cfg;
struct tea5767_ctrl ctl;
......@@ -5832,34 +5871,11 @@ int saa7134_board_init2(struct saa7134_dev *dev)
tea5767_cfg.tuner = TUNER_TEA5767;
tea5767_cfg.priv = &ctl;
saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tea5767_cfg);
}
break;
}
} /* switch() */
if (dev->tuner_type == TUNER_XC2028) {
struct v4l2_priv_tun_config xc2028_cfg;
struct xc2028_ctrl ctl;
memset(&xc2028_cfg, 0, sizeof(ctl));
memset(&ctl, 0, sizeof(ctl));
ctl.fname = XC2028_DEFAULT_FIRMWARE;
ctl.max_len = 64;
switch (dev->board) {
case SAA7134_BOARD_AVERMEDIA_A16D:
ctl.demod = XC3028_FE_ZARLINK456;
break;
default:
ctl.demod = XC3028_FE_OREN538;
ctl.mts = 1;
}
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv = &ctl;
saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
}
saa7134_tuner_setup(dev);
return 0;
}
drivers/media/video/saa7134/saa7134-i2c.c
View file @ c117d05c
......@@ -324,8 +324,6 @@ static u32 functionality(struct i2c_adapter *adap)
static int attach_inform(struct i2c_client *client)
{
struct saa7134_dev *dev = client->adapter->algo_data;
int tuner = dev->tuner_type;
struct tuner_setup tun_setup;
d1printk( "%s i2c attach [addr=0x%x,client=%s]\n",
client->driver->driver.name, client->addr, client->name);
......@@ -346,46 +344,6 @@ static int attach_inform(struct i2c_client *client)
}
}
if (!client->driver->command)
return 0;
if (saa7134_boards[dev->board].radio_type != UNSET) {
tun_setup.type = saa7134_boards[dev->board].radio_type;
tun_setup.addr = saa7134_boards[dev->board].radio_addr;
if ((tun_setup.addr == ADDR_UNSET) || (tun_setup.addr == client->addr)) {
tun_setup.mode_mask = T_RADIO;
client->driver->command(client, TUNER_SET_TYPE_ADDR, &tun_setup);
}
}
if (tuner != UNSET) {
tun_setup.type = tuner;
tun_setup.addr = saa7134_boards[dev->board].tuner_addr;
tun_setup.config = saa7134_boards[dev->board].tuner_config;
tun_setup.tuner_callback = saa7134_tuner_callback;
if ((tun_setup.addr == ADDR_UNSET)||(tun_setup.addr == client->addr)) {
tun_setup.mode_mask = T_ANALOG_TV;
client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_setup);
}
if (tuner == TUNER_TDA9887) {
struct v4l2_priv_tun_config tda9887_cfg;
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &dev->tda9887_conf;
client->driver->command(client, TUNER_SET_CONFIG,
&tda9887_cfg);
}
}
return 0;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7