Commit c15e10e7 authored by Tim Beale's avatar Tim Beale Committed by David S. Miller

net: phy: Make sure phy_start() always re-enables the phy interrupts

This is an alternative way of fixing:
 commit db9683fb ("net: phy: Make sure PHY_RESUMING state change
                      is always processed")

When the PHY state transitions from PHY_HALTED to PHY_RESUMING, there are
two things we need to do:
1). Re-enable interrupts (and power up the physical link, if powered down)
2). Update the PHY state and net-device based on the link status.

There's no strict reason why #1 has to be done from within the main
phy_state_machine() function. There is a risk that other changes to the
PHY (e.g. setting speed/duplex, which calls phy_start_aneg()) could cause
a subsequent state transition before phy_state_machine() has processed
the PHY_RESUMING state change. This would leave the PHY with interrupts
disabled and/or still in the BMCR_PDOWN/low-power mode.

Moving enabling the interrupts and phy_resume() into phy_start() will
guarantee this work always gets done. As the PHY is already in the HALTED
state and interrupts are disabled, it shouldn't conflict with any work
being done in phy_state_machine(). The downside of this change is that if
the PHY_RESUMING state is ever entered from anywhere else, it'll also have
to repeat this work.
Signed-off-by: default avatarTim Beale <tim.beale@alliedtelesis.co.nz>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7764b9dd
......@@ -465,7 +465,7 @@ int phy_start_aneg(struct phy_device *phydev)
if (err < 0)
goto out_unlock;
if (phydev->state != PHY_HALTED && phydev->state != PHY_RESUMING) {
if (phydev->state != PHY_HALTED) {
if (AUTONEG_ENABLE == phydev->autoneg) {
phydev->state = PHY_AN;
phydev->link_timeout = PHY_AN_TIMEOUT;
......@@ -742,6 +742,9 @@ EXPORT_SYMBOL(phy_stop);
*/
void phy_start(struct phy_device *phydev)
{
bool do_resume = false;
int err = 0;
mutex_lock(&phydev->lock);
switch (phydev->state) {
......@@ -752,11 +755,22 @@ void phy_start(struct phy_device *phydev)
phydev->state = PHY_UP;
break;
case PHY_HALTED:
/* make sure interrupts are re-enabled for the PHY */
err = phy_enable_interrupts(phydev);
if (err < 0)
break;
phydev->state = PHY_RESUMING;
do_resume = true;
break;
default:
break;
}
mutex_unlock(&phydev->lock);
/* if phy was suspended, bring the physical link up again */
if (do_resume)
phy_resume(phydev);
}
EXPORT_SYMBOL(phy_start);
......@@ -769,7 +783,7 @@ void phy_state_machine(struct work_struct *work)
struct delayed_work *dwork = to_delayed_work(work);
struct phy_device *phydev =
container_of(dwork, struct phy_device, state_queue);
bool needs_aneg = false, do_suspend = false, do_resume = false;
bool needs_aneg = false, do_suspend = false;
int err = 0;
mutex_lock(&phydev->lock);
......@@ -888,14 +902,6 @@ void phy_state_machine(struct work_struct *work)
}
break;
case PHY_RESUMING:
err = phy_clear_interrupt(phydev);
if (err)
break;
err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
if (err)
break;
if (AUTONEG_ENABLE == phydev->autoneg) {
err = phy_aneg_done(phydev);
if (err < 0)
......@@ -933,7 +939,6 @@ void phy_state_machine(struct work_struct *work)
}
phydev->adjust_link(phydev->attached_dev);
}
do_resume = true;
break;
}
......@@ -943,8 +948,6 @@ void phy_state_machine(struct work_struct *work)
err = phy_start_aneg(phydev);
else if (do_suspend)
phy_suspend(phydev);
else if (do_resume)
phy_resume(phydev);
if (err < 0)
phy_error(phydev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment