riscv: remove CONFIG_MMU ifdefs

The RISC-V port doesn't suport a nommu mode, so there is no reason
to provide some code only under a CONFIG_MMU ifdef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

arch/riscv/include/asm/io.h

@@ -21,8 +21,6 @@
 
 #include <linux/types.h>
 
-#ifdef CONFIG_MMU
-
 extern void __iomem *ioremap(phys_addr_t offset, unsigned long size);
 
 /*
@@ -36,8 +34,6 @@ extern void __iomem *ioremap(phys_addr_t offset, unsigned long size);
 
 extern void iounmap(volatile void __iomem *addr);
 
-#endif /* CONFIG_MMU */
-
 /* Generic IO read/write.  These perform native-endian accesses. */
 #define __raw_writeb __raw_writeb
 static inline void __raw_writeb(u8 val, volatile void __iomem *addr)

arch/riscv/include/asm/pgtable.h

@@ -20,8 +20,6 @@
 
 #ifndef __ASSEMBLY__
 
-#ifdef CONFIG_MMU
-
 /* Page Upper Directory not used in RISC-V */
 #include <asm-generic/pgtable-nopud.h>
 #include <asm/page.h>
@@ -413,8 +411,6 @@ static inline void pgtable_cache_init(void)
 	/* No page table caches to initialize */
 }
 
-#endif /* CONFIG_MMU */
-
 #define VMALLOC_SIZE     (KERN_VIRT_SIZE >> 1)
 #define VMALLOC_END      (PAGE_OFFSET - 1)
 #define VMALLOC_START    (PAGE_OFFSET - VMALLOC_SIZE)

arch/riscv/include/asm/tlbflush.h

@@ -15,8 +15,6 @@
 #ifndef _ASM_RISCV_TLBFLUSH_H
 #define _ASM_RISCV_TLBFLUSH_H
 
-#ifdef CONFIG_MMU
-
 #include <linux/mm_types.h>
 
 /*
@@ -64,6 +62,4 @@ static inline void flush_tlb_kernel_range(unsigned long start,
 	flush_tlb_all();
 }
 
-#endif /* CONFIG_MMU */
-
 #endif /* _ASM_RISCV_TLBFLUSH_H */

arch/riscv/include/asm/uaccess.h

@@ -127,7 +127,6 @@ extern int fixup_exception(struct pt_regs *state);
  * call.
  */
 
-#ifdef CONFIG_MMU
 #define __get_user_asm(insn, x, ptr, err)			\
 do {								\
 	uintptr_t __tmp;					\
@@ -153,13 +152,11 @@ do {								\
 	__disable_user_access();				\
 	(x) = __x;						\
 } while (0)
-#endif /* CONFIG_MMU */
 
 #ifdef CONFIG_64BIT
 #define __get_user_8(x, ptr, err) \
 	__get_user_asm("ld", x, ptr, err)
 #else /* !CONFIG_64BIT */
-#ifdef CONFIG_MMU
 #define __get_user_8(x, ptr, err)				\
 do {								\
 	u32 __user *__ptr = (u32 __user *)(ptr);		\
@@ -193,7 +190,6 @@ do {								\
 	(x) = (__typeof__(x))((__typeof__((x)-(x)))(		\
 		(((u64)__hi << 32) | __lo)));			\
 } while (0)
-#endif /* CONFIG_MMU */
 #endif /* CONFIG_64BIT */
 
 
@@ -267,8 +263,6 @@ do {								\
 		((x) = 0, -EFAULT);				\
 })
 
-
-#ifdef CONFIG_MMU
 #define __put_user_asm(insn, x, ptr, err)			\
 do {								\
 	uintptr_t __tmp;					\
@@ -292,14 +286,11 @@ do {								\
 		: "rJ" (__x), "i" (-EFAULT));			\
 	__disable_user_access();				\
 } while (0)
-#endif /* CONFIG_MMU */
-
 
 #ifdef CONFIG_64BIT
 #define __put_user_8(x, ptr, err) \
 	__put_user_asm("sd", x, ptr, err)
 #else /* !CONFIG_64BIT */
-#ifdef CONFIG_MMU
 #define __put_user_8(x, ptr, err)				\
 do {								\
 	u32 __user *__ptr = (u32 __user *)(ptr);		\
@@ -329,7 +320,6 @@ do {								\
 		: "rJ" (__x), "rJ" (__x >> 32), "i" (-EFAULT));	\
 	__disable_user_access();				\
 } while (0)
-#endif /* CONFIG_MMU */
 #endif /* CONFIG_64BIT */
 
 
@@ -438,7 +428,6 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)
  * will set "err" to -EFAULT, while successful accesses return the previous
  * value.
  */
-#ifdef CONFIG_MMU
 #define __cmpxchg_user(ptr, old, new, err, size, lrb, scb)	\
 ({								\
 	__typeof__(ptr) __ptr = (ptr);				\
@@ -508,6 +497,5 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)
 	(err) = __err;						\
 	__ret;							\
 })
-#endif /* CONFIG_MMU */
 
 #endif /* _ASM_RISCV_UACCESS_H */