Commit c1bac171 authored by Nishanth Menon's avatar Nishanth Menon Committed by Benoit Cousson

ARM: dts: omap4-panda-es: Do not reset gpio1

Do not reset GPIO1 at boot-up because GPIO 7 in GPIO1 block is used on
OMAP4460 PandaBoard-ES to select voltage register in TPS62361 which
supplies VDD_MPU.

Without this, OMAP4460 PandaBoard-ES boards fail to boot-up because
MPU voltage switches over to VSET0 voltage value (boot voltage) which
is not sufficient to operate the device at OPP100.
Signed-off-by: default avatarNishanth Menon <nm@ti.com>
Signed-off-by: default avatarBenoit Cousson <bcousson@baylibre.com>
parent 6046adb6
...@@ -62,3 +62,7 @@ mmc { ...@@ -62,3 +62,7 @@ mmc {
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
}; };
}; };
&gpio1 {
ti,no-reset-on-init;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment