Commit c2e935a7 authored by Richard Zhao's avatar Richard Zhao Committed by Greg Kroah-Hartman

USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it as phy

 - to decrease redundant since both ehci_hcd and ohci_hcd have the same variable
 - it helps access phy in usb core code
 - phy is more meaningful than transceiver
Signed-off-by: default avatarRichard Zhao <richard.zhao@freescale.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 45277159
......@@ -142,19 +142,19 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
if (pdata->operating_mode == FSL_USB2_DR_OTG) {
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
ehci->transceiver = usb_get_transceiver();
dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, transceiver=0x%p\n",
hcd, ehci, ehci->transceiver);
hcd->phy = usb_get_transceiver();
dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n",
hcd, ehci, hcd->phy);
if (ehci->transceiver) {
retval = otg_set_host(ehci->transceiver->otg,
if (hcd->phy) {
retval = otg_set_host(hcd->phy->otg,
&ehci_to_hcd(ehci)->self);
if (retval) {
usb_put_transceiver(ehci->transceiver);
usb_put_transceiver(hcd->phy);
goto err4;
}
} else {
dev_err(&pdev->dev, "can't find transceiver\n");
dev_err(&pdev->dev, "can't find phy\n");
retval = -ENODEV;
goto err4;
}
......@@ -190,11 +190,10 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
if (ehci->transceiver) {
otg_set_host(ehci->transceiver->otg, NULL);
usb_put_transceiver(ehci->transceiver);
if (hcd->phy) {
otg_set_host(hcd->phy->otg, NULL);
usb_put_transceiver(hcd->phy);
}
usb_remove_hcd(hcd);
......
......@@ -724,7 +724,7 @@ static int ehci_hub_control (
#ifdef CONFIG_USB_OTG
if ((hcd->self.otg_port == (wIndex + 1))
&& hcd->self.b_hnp_enable) {
otg_start_hnp(ehci->transceiver->otg);
otg_start_hnp(hcd->phy->otg);
break;
}
#endif
......
......@@ -175,10 +175,6 @@ struct ehci_hcd { /* one per controller */
#ifdef DEBUG
struct dentry *debug_dir;
#endif
/*
* OTG controllers and transceivers need software interaction
*/
struct usb_phy *transceiver;
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
......
......@@ -167,14 +167,15 @@ static int omap_1510_local_bus_init(void)
static void start_hnp(struct ohci_hcd *ohci)
{
const unsigned port = ohci_to_hcd(ohci)->self.otg_port - 1;
struct usb_hcd *hcd = ohci_to_hcd(ohci);
const unsigned port = hcd->self.otg_port - 1;
unsigned long flags;
u32 l;
otg_start_hnp(ohci->transceiver->otg);
otg_start_hnp(hcd->phy->otg);
local_irq_save(flags);
ohci->transceiver->state = OTG_STATE_A_SUSPEND;
hcd->phy->state = OTG_STATE_A_SUSPEND;
writel (RH_PS_PSS, &ohci->regs->roothub.portstatus [port]);
l = omap_readl(OTG_CTRL);
l &= ~OTG_A_BUSREQ;
......@@ -211,18 +212,18 @@ static int ohci_omap_init(struct usb_hcd *hcd)
#ifdef CONFIG_USB_OTG
if (need_transceiver) {
ohci->transceiver = usb_get_transceiver();
if (ohci->transceiver) {
int status = otg_set_host(ohci->transceiver->otg,
hcd->phy = usb_get_transceiver();
if (hcd->phy) {
int status = otg_set_host(hcd->phy->otg,
&ohci_to_hcd(ohci)->self);
dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n",
ohci->transceiver->label, status);
dev_dbg(hcd->self.controller, "init %s phy, status %d\n",
hcd->phy->label, status);
if (status) {
usb_put_transceiver(ohci->transceiver);
usb_put_transceiver(hcd->phy);
return status;
}
} else {
dev_err(hcd->self.controller, "can't find transceiver\n");
dev_err(hcd->self.controller, "can't find phy\n");
return -ENODEV;
}
ohci->start_hnp = start_hnp;
......@@ -403,9 +404,9 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
usb_remove_hcd(hcd);
if (ohci->transceiver) {
(void) otg_set_host(ohci->transceiver->otg, 0);
usb_put_transceiver(ohci->transceiver);
if (hcd->phy) {
(void) otg_set_host(hcd->phy->otg, 0);
usb_put_transceiver(hcd->phy);
}
if (machine_is_omap_osk())
gpio_free(9);
......
......@@ -372,11 +372,6 @@ struct ohci_hcd {
struct ed *ed_controltail; /* last in ctrl list */
struct ed *periodic [NUM_INTS]; /* shadow int_table */
/*
* OTG controllers and transceivers need software interaction;
* other external transceivers should be software-transparent
*/
struct usb_phy *transceiver;
void (*start_hnp)(struct ohci_hcd *ohci);
/*
......
......@@ -93,6 +93,12 @@ struct usb_hcd {
*/
const struct hc_driver *driver; /* hw-specific hooks */
/*
* OTG and some Host controllers need software interaction with phys;
* other external phys should be software-transparent
*/
struct usb_phy *phy;
/* Flags that need to be manipulated atomically because they can
* change while the host controller is running. Always use
* set_bit() or clear_bit() to change their values.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment