Commit c2f6b67d authored by Radhey Shyam Pandey's avatar Radhey Shyam Pandey Committed by Vinod Koul

dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handle

Extend dma_config structure to store irq routine handle. It enables runtime
handler selection based on xdma_ip_type and serves as preparatory patch for
adding MCDMA IP support.
Signed-off-by: default avatarRadhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Suggested-by: default avatarVinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/1571763622-29281-6-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: default avatarVinod Koul <vkoul@kernel.org>
parent bcb2dc7b
......@@ -391,6 +391,7 @@ struct xilinx_dma_config {
int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
struct clk **tx_clk, struct clk **txs_clk,
struct clk **rx_clk, struct clk **rxs_clk);
irqreturn_t (*irq_handler)(int irq, void *data);
};
/**
......@@ -2402,8 +2403,8 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
/* Request the interrupt */
chan->irq = irq_of_parse_and_map(node, 0);
err = request_irq(chan->irq, xilinx_dma_irq_handler, IRQF_SHARED,
"xilinx-dma-controller", chan);
err = request_irq(chan->irq, xdev->dma_config->irq_handler,
IRQF_SHARED, "xilinx-dma-controller", chan);
if (err) {
dev_err(xdev->dev, "unable to request IRQ %d\n", chan->irq);
return err;
......@@ -2497,16 +2498,19 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
static const struct xilinx_dma_config axidma_config = {
.dmatype = XDMA_TYPE_AXIDMA,
.clk_init = axidma_clk_init,
.irq_handler = xilinx_dma_irq_handler,
};
static const struct xilinx_dma_config axicdma_config = {
.dmatype = XDMA_TYPE_CDMA,
.clk_init = axicdma_clk_init,
.irq_handler = xilinx_dma_irq_handler,
};
static const struct xilinx_dma_config axivdma_config = {
.dmatype = XDMA_TYPE_VDMA,
.clk_init = axivdma_clk_init,
.irq_handler = xilinx_dma_irq_handler,
};
static const struct of_device_id xilinx_dma_of_ids[] = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment