brcmfmac: move glom alignment setting to SDIO bus layer

txglomming alignment is a SDIO bus specific feature. It is more
appropriate to place it in SDIO bus layer instead of common layer.
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c

@@ -800,7 +800,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
 	char iovbuf[BRCMF_EVENTING_MASK_LEN + 12];	/*  Room for
 				 "event_msgs" + '\0' + bitvec  */
 	char buf[128], *ptr;
-	u32 dongle_align = drvr->bus_if->align;
 	u32 roaming = 1;
 	uint bcn_timeout = 3;
 	int scan_assoc_time = 40;
@@ -828,12 +827,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
 	/* Print fw version info */
 	brcmf_dbg(ERROR, "Firmware version = %s\n", buf);
 
-	/* Match Host and Dongle rx alignment */
-	brcmf_c_mkiovar("bus:txglomalign", (char *)&dongle_align, 4, iovbuf,
-		    sizeof(iovbuf));
-	brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf,
-				  sizeof(iovbuf));
-
 	/* Setup timeout if Beacons are lost and roam is off to report
 		 link down */
 	brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf,

drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c

@@ -4171,6 +4171,7 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 	struct brcmf_sdio *bus;
 	struct brcmf_bus_dcmd *dlst;
 	u32 dngl_txglom;
+	u32 dngl_txglomalign;
 	u8 idx;
 
 	brcmf_dbg(TRACE, "Enter\n");
@@ -4260,12 +4261,20 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 	/* sdio bus core specific dcmd */
 	idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
 	dlst = kzalloc(sizeof(struct brcmf_bus_dcmd), GFP_KERNEL);
-	if (bus->ci->c_inf[idx].rev < 12 && dlst) {
-		/* for sdio core rev < 12, disable txgloming */
-		dngl_txglom = 0;
-		dlst->name = "bus:txglom";
-		dlst->param = (char *)&dngl_txglom;
-		dlst->param_len = sizeof(u32);
+	if (dlst) {
+		if (bus->ci->c_inf[idx].rev < 12) {
+			/* for sdio core rev < 12, disable txgloming */
+			dngl_txglom = 0;
+			dlst->name = "bus:txglom";
+			dlst->param = (char *)&dngl_txglom;
+			dlst->param_len = sizeof(u32);
+		} else {
+			/* otherwise, set txglomalign */
+			dngl_txglomalign = bus->sdiodev->bus_if->align;
+			dlst->name = "bus:txglomalign";
+			dlst->param = (char *)&dngl_txglomalign;
+			dlst->param_len = sizeof(u32);
+		}
 		list_add(&dlst->list, &bus->sdiodev->bus_if->dcmd_list);
 	}