drm: dw-hdmi-i2s: enable audio clock in audio_startup

In the designware databook, the sequence of enabling audio clock and
setting format is not clearly specified.
Currently, audio clock is enabled in the end of hw_param ops after
setting format.

On some monitors, there is a possibility that audio does not come out.
Fix this by enabling audio clock in audio_startup ops
before hw_param ops setting format.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902035435.44463-1-cychiang@chromium.org

drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c

@@ -109,6 +109,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
 	hdmi_write(audio, conf0, HDMI_AUD_CONF0);
 	hdmi_write(audio, conf1, HDMI_AUD_CONF1);
 
+	return 0;
+}
+
+static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
+{
+	struct dw_hdmi_i2s_audio_data *audio = data;
+	struct dw_hdmi *hdmi = audio->hdmi;
+
 	dw_hdmi_audio_enable(hdmi);
 
 	return 0;
@@ -153,6 +161,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
 
 static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
 	.hw_params	= dw_hdmi_i2s_hw_params,
+	.audio_startup  = dw_hdmi_i2s_audio_startup,
 	.audio_shutdown	= dw_hdmi_i2s_audio_shutdown,
 	.get_eld	= dw_hdmi_i2s_get_eld,
 	.get_dai_id	= dw_hdmi_i2s_get_dai_id,