Commit c42ced63 authored by Tomi Valkeinen's avatar Tomi Valkeinen

OMAP: DSS2: RFBI: cleanup

The RFBI driver is quite messy. Remove dead and unneeded code and add
statics to functions.
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
parent 1d5952a8
......@@ -515,13 +515,6 @@ void hdmi_panel_exit(void);
int rfbi_init_platform_driver(void);
void rfbi_uninit_platform_driver(void);
void rfbi_dump_regs(struct seq_file *s);
int rfbi_configure(int rfbi_module, int bpp, int lines);
void rfbi_enable_rfbi(bool enable);
void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
u16 height, void (callback)(void *data), void *data);
void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t);
unsigned long rfbi_get_max_tx_rate(void);
int rfbi_init_display(struct omap_dss_device *display);
#else
static inline int rfbi_init_platform_driver(void)
......
......@@ -66,9 +66,6 @@ struct rfbi_reg { u16 idx; };
#define REG_FLD_MOD(idx, val, start, end) \
rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end))
/* To work around an RFBI transfer rate limitation */
#define OMAP_RFBI_RATE_LIMIT 1
enum omap_rfbi_cycleformat {
OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0,
OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1,
......@@ -90,11 +87,6 @@ enum omap_rfbi_parallelmode {
OMAP_DSS_RFBI_PARALLELMODE_16 = 3,
};
enum update_cmd {
RFBI_CMD_UPDATE = 0,
RFBI_CMD_SYNC = 1,
};
static int rfbi_convert_timings(struct rfbi_timings *t);
static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div);
......@@ -115,22 +107,9 @@ static struct {
struct omap_dss_device *dssdev[2];
struct kfifo cmd_fifo;
spinlock_t cmd_lock;
struct completion cmd_done;
atomic_t cmd_fifo_full;
atomic_t cmd_pending;
struct semaphore bus_lock;
} rfbi;
struct update_region {
u16 x;
u16 y;
u16 w;
u16 h;
};
static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val)
{
__raw_writel(val, rfbi.base + idx.idx);
......@@ -305,7 +284,7 @@ void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
}
EXPORT_SYMBOL(omap_rfbi_write_pixels);
void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
u16 height, void (*callback)(void *data), void *data)
{
u32 l;
......@@ -345,8 +324,6 @@ static void framedone_callback(void *data, u32 mask)
if (callback != NULL)
callback(rfbi.framedone_callback_data);
atomic_set(&rfbi.cmd_pending, 0);
}
#if 1 /* VERBOSE */
......@@ -436,7 +413,7 @@ static int calc_extif_timings(struct rfbi_timings *t)
}
void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t)
static void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t)
{
int r;
......@@ -471,59 +448,6 @@ static int ps_to_rfbi_ticks(int time, int div)
return ret;
}
#ifdef OMAP_RFBI_RATE_LIMIT
unsigned long rfbi_get_max_tx_rate(void)
{
unsigned long l4_rate, dss1_rate;
int min_l4_ticks = 0;
int i;
/* According to TI this can't be calculated so make the
* adjustments for a couple of known frequencies and warn for
* others.
*/
static const struct {
unsigned long l4_clk; /* HZ */
unsigned long dss1_clk; /* HZ */
unsigned long min_l4_ticks;
} ftab[] = {
{ 55, 132, 7, }, /* 7.86 MPix/s */
{ 110, 110, 12, }, /* 9.16 MPix/s */
{ 110, 132, 10, }, /* 11 Mpix/s */
{ 120, 120, 10, }, /* 12 Mpix/s */
{ 133, 133, 10, }, /* 13.3 Mpix/s */
};
l4_rate = rfbi.l4_khz / 1000;
dss1_rate = dss_clk_get_rate(DSS_CLK_FCK) / 1000000;
for (i = 0; i < ARRAY_SIZE(ftab); i++) {
/* Use a window instead of an exact match, to account
* for different DPLL multiplier / divider pairs.
*/
if (abs(ftab[i].l4_clk - l4_rate) < 3 &&
abs(ftab[i].dss1_clk - dss1_rate) < 3) {
min_l4_ticks = ftab[i].min_l4_ticks;
break;
}
}
if (i == ARRAY_SIZE(ftab)) {
/* Can't be sure, return anyway the maximum not
* rate-limited. This might cause a problem only for the
* tearing synchronisation.
*/
DSSERR("can't determine maximum RFBI transfer rate\n");
return rfbi.l4_khz * 1000;
}
return rfbi.l4_khz * 1000 / min_l4_ticks;
}
#else
int rfbi_get_max_tx_rate(void)
{
return rfbi.l4_khz * 1000;
}
#endif
static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
{
*clk_period = 1000000000 / rfbi.l4_khz;
......@@ -683,44 +607,7 @@ int omap_rfbi_enable_te(bool enable, unsigned line)
}
EXPORT_SYMBOL(omap_rfbi_enable_te);
#if 0
static void rfbi_enable_config(int enable1, int enable2)
{
u32 l;
int cs = 0;
if (enable1)
cs |= 1<<0;
if (enable2)
cs |= 1<<1;
rfbi_enable_clocks(1);
l = rfbi_read_reg(RFBI_CONTROL);
l = FLD_MOD(l, cs, 3, 2);
l = FLD_MOD(l, 0, 1, 1);
rfbi_write_reg(RFBI_CONTROL, l);
l = rfbi_read_reg(RFBI_CONFIG(0));
l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */
/*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */
/*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */
l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */
l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */
l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */
l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0);
rfbi_write_reg(RFBI_CONFIG(0), l);
rfbi_enable_clocks(0);
}
#endif
int rfbi_configure(int rfbi_module, int bpp, int lines)
static int rfbi_configure(int rfbi_module, int bpp, int lines)
{
u32 l;
int cycle1 = 0, cycle2 = 0, cycle3 = 0;
......@@ -1022,13 +909,8 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
rfbi.pdev = pdev;
spin_lock_init(&rfbi.cmd_lock);
sema_init(&rfbi.bus_lock, 1);
init_completion(&rfbi.cmd_done);
atomic_set(&rfbi.cmd_fifo_full, 0);
atomic_set(&rfbi.cmd_pending, 0);
rfbi_mem = platform_get_resource(rfbi.pdev, IORESOURCE_MEM, 0);
if (!rfbi_mem) {
DSSERR("can't get IORESOURCE_MEM RFBI\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment