drm/nouveau/core: split device index enum out on its own

To avoid having to include core/device.h where it's not otherwise
required.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drivers/gpu/drm/nouveau/include/nvkm/core/device.h

@@ -6,66 +6,6 @@
 #include <core/engine.h>
 #include <core/event.h>
 
-enum nv_subdev_type {
-	NVDEV_ENGINE_DEVICE,
-	NVDEV_SUBDEV_VBIOS,
-
-	/* All subdevs from DEVINIT to DEVINIT_LAST will be created before
-	 * *any* of them are initialised.  This subdev category is used
-	 * for any subdevs that the VBIOS init table parsing may call out
-	 * to during POST.
-	 */
-	NVDEV_SUBDEV_DEVINIT,
-	NVDEV_SUBDEV_IBUS,
-	NVDEV_SUBDEV_GPIO,
-	NVDEV_SUBDEV_I2C,
-	NVDEV_SUBDEV_DEVINIT_LAST = NVDEV_SUBDEV_I2C,
-
-	/* This grouping of subdevs are initialised right after they've
-	 * been created, and are allowed to assume any subdevs in the
-	 * list above them exist and have been initialised.
-	 */
-	NVDEV_SUBDEV_FUSE,
-	NVDEV_SUBDEV_MXM,
-	NVDEV_SUBDEV_MC,
-	NVDEV_SUBDEV_BUS,
-	NVDEV_SUBDEV_TIMER,
-	NVDEV_SUBDEV_FB,
-	NVDEV_SUBDEV_LTC,
-	NVDEV_SUBDEV_INSTMEM,
-	NVDEV_SUBDEV_MMU,
-	NVDEV_SUBDEV_BAR,
-	NVDEV_SUBDEV_PMU,
-	NVDEV_SUBDEV_VOLT,
-	NVDEV_SUBDEV_THERM,
-	NVDEV_SUBDEV_CLK,
-
-	NVDEV_ENGINE_FIRST,
-	NVDEV_ENGINE_DMAOBJ = NVDEV_ENGINE_FIRST,
-	NVDEV_ENGINE_IFB,
-	NVDEV_ENGINE_FIFO,
-	NVDEV_ENGINE_SW,
-	NVDEV_ENGINE_GR,
-	NVDEV_ENGINE_MPEG,
-	NVDEV_ENGINE_ME,
-	NVDEV_ENGINE_VP,
-	NVDEV_ENGINE_CIPHER,
-	NVDEV_ENGINE_BSP,
-	NVDEV_ENGINE_MSPPP,
-	NVDEV_ENGINE_CE0,
-	NVDEV_ENGINE_CE1,
-	NVDEV_ENGINE_CE2,
-	NVDEV_ENGINE_VIC,
-	NVDEV_ENGINE_MSENC,
-	NVDEV_ENGINE_DISP,
-	NVDEV_ENGINE_PM,
-	NVDEV_ENGINE_MSVLD,
-	NVDEV_ENGINE_SEC,
-	NVDEV_ENGINE_MSPDEC,
-
-	NVDEV_SUBDEV_NR,
-};
-
 struct nouveau_device {
 	struct nouveau_engine engine;
 	struct list_head head;

drivers/gpu/drm/nouveau/include/nvkm/core/devidx.h

+#ifndef __NVKM_DEVIDX_H__
+#define __NVKM_DEVIDX_H__
+enum nvkm_devidx {
+	NVDEV_ENGINE_DEVICE,
+	NVDEV_SUBDEV_VBIOS,
+
+	/* All subdevs from DEVINIT to DEVINIT_LAST will be created before
+	 * *any* of them are initialised.  This subdev category is used
+	 * for any subdevs that the VBIOS init table parsing may call out
+	 * to during POST.
+	 */
+	NVDEV_SUBDEV_DEVINIT,
+	NVDEV_SUBDEV_IBUS,
+	NVDEV_SUBDEV_GPIO,
+	NVDEV_SUBDEV_I2C,
+	NVDEV_SUBDEV_DEVINIT_LAST = NVDEV_SUBDEV_I2C,
+
+	/* This grouping of subdevs are initialised right after they've
+	 * been created, and are allowed to assume any subdevs in the
+	 * list above them exist and have been initialised.
+	 */
+	NVDEV_SUBDEV_FUSE,
+	NVDEV_SUBDEV_MXM,
+	NVDEV_SUBDEV_MC,
+	NVDEV_SUBDEV_BUS,
+	NVDEV_SUBDEV_TIMER,
+	NVDEV_SUBDEV_FB,
+	NVDEV_SUBDEV_LTC,
+	NVDEV_SUBDEV_INSTMEM,
+	NVDEV_SUBDEV_MMU,
+	NVDEV_SUBDEV_BAR,
+	NVDEV_SUBDEV_PMU,
+	NVDEV_SUBDEV_VOLT,
+	NVDEV_SUBDEV_THERM,
+	NVDEV_SUBDEV_CLK,
+
+	NVDEV_ENGINE_FIRST,
+	NVDEV_ENGINE_DMAOBJ = NVDEV_ENGINE_FIRST,
+	NVDEV_ENGINE_IFB,
+	NVDEV_ENGINE_FIFO,
+	NVDEV_ENGINE_SW,
+	NVDEV_ENGINE_GR,
+	NVDEV_ENGINE_MPEG,
+	NVDEV_ENGINE_ME,
+	NVDEV_ENGINE_VP,
+	NVDEV_ENGINE_CIPHER,
+	NVDEV_ENGINE_BSP,
+	NVDEV_ENGINE_MSPPP,
+	NVDEV_ENGINE_CE0,
+	NVDEV_ENGINE_CE1,
+	NVDEV_ENGINE_CE2,
+	NVDEV_ENGINE_VIC,
+	NVDEV_ENGINE_MSENC,
+	NVDEV_ENGINE_DISP,
+	NVDEV_ENGINE_PM,
+	NVDEV_ENGINE_MSVLD,
+	NVDEV_ENGINE_SEC,
+	NVDEV_ENGINE_MSPDEC,
+
+	NVDEV_SUBDEV_NR,
+};
+#endif

drivers/gpu/drm/nouveau/include/nvkm/core/subdev.h

@@ -2,6 +2,7 @@
 #define __NOUVEAU_SUBDEV_H__
 
 #include <core/object.h>
+#include <core/devidx.h>
 
 #define NV_SUBDEV_(sub,var) (NV_SUBDEV_CLASS | ((var) << 8) | (sub))
 #define NV_SUBDEV(name,var)  NV_SUBDEV_(NVDEV_SUBDEV_##name, (var))