RDMA/ocrdma: Increase STAG array size

1) Increase STAG Array size.
2) Max inline data size should be set to the same value
   used during QP creation
3) Set max_sge_rd to zero since we dont support RD transport in our adapters.
4) Max cqes reported in ibv_devinfo should be from QUERY_CONFIG.
Signed-off-by: Naresh Gottumukkala <bgottumukkala@emulex.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

drivers/infiniband/hw/ocrdma/ocrdma_hw.c

@@ -994,6 +994,9 @@ static void ocrdma_get_attr(struct ocrdma_dev *dev,
 	attr->max_num_mr_pbl = rsp->max_num_mr_pbl;
 	attr->max_cqe = rsp->max_cq_cqes_per_cq &
 			OCRDMA_MBX_QUERY_CFG_MAX_CQES_PER_CQ_MASK;
+	attr->max_cq = (rsp->max_cq_cqes_per_cq &
+			OCRDMA_MBX_QUERY_CFG_MAX_CQ_MASK) >>
+			OCRDMA_MBX_QUERY_CFG_MAX_CQ_OFFSET;
 	attr->wqe_size = ((rsp->wqe_rqe_stride_max_dpp_cqs &
 		OCRDMA_MBX_QUERY_CFG_MAX_WQE_SIZE_MASK) >>
 		OCRDMA_MBX_QUERY_CFG_MAX_WQE_SIZE_OFFSET) *
@@ -1026,7 +1029,6 @@ static int ocrdma_check_fw_config(struct ocrdma_dev *dev,
 		return -EINVAL;
 	dev->base_eqid = conf->base_eqid;
 	dev->max_eq = conf->max_eq;
-	dev->attr.max_cq = OCRDMA_MAX_CQ - 1;
 	return 0;
 }
 

drivers/infiniband/hw/ocrdma/ocrdma_sli.h

@@ -91,7 +91,7 @@ enum {
 
 #define OCRDMA_MAX_QP    2048
 #define OCRDMA_MAX_CQ    2048
-#define OCRDMA_MAX_STAG  2048
+#define OCRDMA_MAX_STAG  8192
 
 enum {
 	OCRDMA_DB_RQ_OFFSET		= 0xE0,

drivers/infiniband/hw/ocrdma/ocrdma_verbs.c

@@ -85,7 +85,7 @@ int ocrdma_query_device(struct ib_device *ibdev, struct ib_device_attr *attr)
 					IB_DEVICE_LOCAL_DMA_LKEY |
 					IB_DEVICE_MEM_MGT_EXTENSIONS;
 	attr->max_sge = min(dev->attr.max_send_sge, dev->attr.max_srq_sge);
-	attr->max_sge_rd = dev->attr.max_rdma_sge;
+	attr->max_sge_rd = 0;
 	attr->max_cq = dev->attr.max_cq;
 	attr->max_cqe = dev->attr.max_cqe;
 	attr->max_mr = dev->attr.max_mr;
@@ -1365,7 +1365,7 @@ int ocrdma_query_qp(struct ib_qp *ibqp,
 	qp_attr->cap.max_recv_wr = qp->rq.max_cnt - 1;
 	qp_attr->cap.max_send_sge = qp->sq.max_sges;
 	qp_attr->cap.max_recv_sge = qp->rq.max_sges;
-	qp_attr->cap.max_inline_data = dev->attr.max_inline_data;
+	qp_attr->cap.max_inline_data = qp->max_inline_data;
 	qp_init_attr->cap = qp_attr->cap;
 	memcpy(&qp_attr->ah_attr.grh.dgid, &params.dgid[0],
 	       sizeof(params.dgid));