ARM: dts: imx6-tx6: remove container node around pinctrl nodes

Remove the function node around the pinctrl nodes that was obsoleted
by commit 5fcdf6a7 ("pinctrl: imx: Allow parsing DT without
function nodes"), we can save this container node.

Also move the iomux node to the bottom of the file to improve
readability of the file.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6dl-tx6u-811x.dts

@@ -111,16 +111,6 @@ polytouch2: eeti@04 {
 	};
 };
 
-&iomuxc {
-	imx6dl-tx6u-811x {
-		pinctrl_eeti: eetigrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-			>;
-		};
-	};
-};
-
 &kpp {
 	status = "disabled"; /* pad conflict with backlight1 PWM */
 };
@@ -178,3 +168,11 @@ lvds_timing1: hsd100pxn1 {
 &pwm1 {
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_eeti: eetigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+		>;
+	};
+};

arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts

@@ -124,22 +124,6 @@ &gpmi {
 	status = "disabled";
 };
 
-&iomuxc {
-	imx6qdl-tx6 {
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-			>;
-		};
-	};
-};
-
 &ipu1_di0_disp0 {
 	remote-endpoint = <&display0_in>;
 };
@@ -164,3 +148,17 @@ &usdhc4 {
 	fsl,wp-controller;
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};

arch/arm/boot/dts/imx6q-tx6q-1020.dts

@@ -210,22 +210,6 @@ &gpmi {
 	status = "disabled";
 };
 
-&iomuxc {
-	imx6qdl-tx6 {
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-			>;
-		};
-	};
-};
-
 &ipu1_di0_disp0 {
 	remote-endpoint = <&display0_in>;
 };
@@ -238,3 +222,17 @@ &usdhc4 {
 	fsl,wp-controller;
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};

arch/arm/boot/dts/imx6q-tx6q-1110.dts

@@ -111,16 +111,6 @@ polytouch1: eeti@04 {
 	};
 };
 
-&iomuxc {
-	imx6q-tx6q-1110 {
-		pinctrl_eeti: eetigrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-			>;
-		};
-	};
-};
-
 &kpp {
 	status = "disabled"; /* pad conflict with backlight1 PWM */
 };
@@ -182,3 +172,11 @@ &pwm1 {
 &sata {
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_eeti: eetigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
+		>;
+	};
+};