Commit c4cc625e authored by Artem Bityutskiy's avatar Artem Bityutskiy Committed by David Woodhouse

mtd: sst25l: initialize writebufsize

The writebufsize concept was introduce by commit
"0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents
the maximum amount of data the device writes to the media at a time. This is
an important parameter for UBIFS which is used during recovery and which
basically defines how big a corruption caused by a power cut can be.

Set writebufsize to the flash page size because it is the maximum amount of
data it writes at a time.
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: stable@kernel.org [2.6.38+]
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent 81fefdf2
...@@ -402,6 +402,7 @@ static int __devinit sst25l_probe(struct spi_device *spi) ...@@ -402,6 +402,7 @@ static int __devinit sst25l_probe(struct spi_device *spi)
flash->mtd.flags = MTD_CAP_NORFLASH; flash->mtd.flags = MTD_CAP_NORFLASH;
flash->mtd.erasesize = flash_info->erase_size; flash->mtd.erasesize = flash_info->erase_size;
flash->mtd.writesize = flash_info->page_size; flash->mtd.writesize = flash_info->page_size;
flash->mtd.writebufsize = flash_info->page_size;
flash->mtd.size = flash_info->page_size * flash_info->nr_pages; flash->mtd.size = flash_info->page_size * flash_info->nr_pages;
flash->mtd._erase = sst25l_erase; flash->mtd._erase = sst25l_erase;
flash->mtd._read = sst25l_read; flash->mtd._read = sst25l_read;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment