[media] anysee: fix non-working E30 Combo Plus DVB-T

PLL was attached twice to frontend0 leaving frontend1 without a tuner.
frontend0 is DVB-C and frontend1 is DVB-T.

Cc: stable@vger.kernel.org
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/usb/dvb-usb-v2/anysee.c

@@ -442,6 +442,7 @@ static struct cxd2820r_config anysee_cxd2820r_config = {
  * IOD[0] ZL10353 1=enabled
  * IOE[0] tuner 0=enabled
  * tuner is behind ZL10353 I2C-gate
+ * tuner is behind TDA10023 I2C-gate
  *
  * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
  * PCB: 508TC (rev0.6)
@@ -956,7 +957,7 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 
 		if (fe && adap->fe[1]) {
 			/* attach tuner for 2nd FE */
-			fe = dvb_attach(dvb_pll_attach, adap->fe[0],
+			fe = dvb_attach(dvb_pll_attach, adap->fe[1],
 					(0xc0 >> 1), &d->i2c_adap,
 					DVB_PLL_SAMSUNG_DTOS403IH102A);
 		}