Commit c586aa8f authored by William Breathitt Gray's avatar William Breathitt Gray Committed by Linus Torvalds

gpio: pcie-idio-24: utilize for_each_set_clump8 macro

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/d5d22fa9809dcf8330f4381dbe7e7ca37990e79f.1570641097.git.vilhelm.gray@gmail.comSigned-off-by: default avatarWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 2dc7c3c1
......@@ -201,52 +201,34 @@ static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
size_t i;
const unsigned int gpio_reg_size = 8;
unsigned int bits_offset;
size_t word_index;
unsigned int word_offset;
unsigned long word_mask;
const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
unsigned long port_state;
unsigned long offset;
unsigned long gpio_mask;
void __iomem *ports[] = {
&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
&idio24gpio->reg->out16_23, &idio24gpio->reg->in0_7,
&idio24gpio->reg->in8_15, &idio24gpio->reg->in16_23,
};
size_t index;
unsigned long port_state;
const unsigned long out_mode_mask = BIT(1);
/* clear bits array to a clean slate */
bitmap_zero(bits, chip->ngpio);
/* get bits are evaluated a gpio port register at a time */
for (i = 0; i < ARRAY_SIZE(ports) + 1; i++) {
/* gpio offset in bits array */
bits_offset = i * gpio_reg_size;
/* word index for bits array */
word_index = BIT_WORD(bits_offset);
/* gpio offset within current word of bits array */
word_offset = bits_offset % BITS_PER_LONG;
/* mask of get bits for current gpio within current word */
word_mask = mask[word_index] & (port_mask << word_offset);
if (!word_mask) {
/* no get bits in this port so skip to next one */
continue;
}
for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
index = offset / 8;
/* read bits from current gpio port (port 6 is TTL GPIO) */
if (i < 6)
port_state = ioread8(ports[i]);
if (index < 6)
port_state = ioread8(ports[index]);
else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
port_state = ioread8(&idio24gpio->reg->ttl_out0_7);
else
port_state = ioread8(&idio24gpio->reg->ttl_in0_7);
/* store acquired bits at respective bits array offset */
bits[word_index] |= (port_state << word_offset) & word_mask;
port_state &= gpio_mask;
bitmap_set_value8(bits, port_state, offset);
}
return 0;
......@@ -297,59 +279,48 @@ static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
unsigned long *mask, unsigned long *bits)
{
struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
size_t i;
unsigned long bits_offset;
unsigned long offset;
unsigned long gpio_mask;
const unsigned int gpio_reg_size = 8;
const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
unsigned long flags;
unsigned int out_state;
void __iomem *ports[] = {
&idio24gpio->reg->out0_7, &idio24gpio->reg->out8_15,
&idio24gpio->reg->out16_23
};
size_t index;
unsigned long bitmask;
unsigned long flags;
unsigned long out_state;
const unsigned long out_mode_mask = BIT(1);
const unsigned int ttl_offset = 48;
const size_t ttl_i = BIT_WORD(ttl_offset);
const unsigned int word_offset = ttl_offset % BITS_PER_LONG;
const unsigned long ttl_mask = (mask[ttl_i] >> word_offset) & port_mask;
const unsigned long ttl_bits = (bits[ttl_i] >> word_offset) & ttl_mask;
/* set bits are processed a gpio port register at a time */
for (i = 0; i < ARRAY_SIZE(ports); i++) {
/* gpio offset in bits array */
bits_offset = i * gpio_reg_size;
/* check if any set bits for current port */
gpio_mask = (*mask >> bits_offset) & port_mask;
if (!gpio_mask) {
/* no set bits for this port so move on to next port */
continue;
}
raw_spin_lock_irqsave(&idio24gpio->lock, flags);
for_each_set_clump8(offset, gpio_mask, mask, ARRAY_SIZE(ports) * 8) {
index = offset / 8;
/* process output lines */
out_state = ioread8(ports[i]) & ~gpio_mask;
out_state |= (*bits >> bits_offset) & gpio_mask;
iowrite8(out_state, ports[i]);
bitmask = bitmap_get_value8(bits, offset) & gpio_mask;
raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
}
raw_spin_lock_irqsave(&idio24gpio->lock, flags);
/* check if setting TTL lines and if they are in output mode */
if (!ttl_mask || !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask))
return;
/* read bits from current gpio port (port 6 is TTL GPIO) */
if (index < 6) {
out_state = ioread8(ports[index]);
} else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask) {
out_state = ioread8(&idio24gpio->reg->ttl_out0_7);
} else {
/* skip TTL GPIO if set for input */
raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
continue;
}
/* handle TTL output */
raw_spin_lock_irqsave(&idio24gpio->lock, flags);
/* set requested bit states */
out_state &= ~gpio_mask;
out_state |= bitmask;
/* process output lines */
out_state = ioread8(&idio24gpio->reg->ttl_out0_7) & ~ttl_mask;
out_state |= ttl_bits;
iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
/* write bits for current gpio port (port 6 is TTL GPIO) */
if (index < 6)
iowrite8(out_state, ports[index]);
else
iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
}
}
static void idio_24_irq_ack(struct irq_data *data)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment