Commit c5ac9319 authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller

qed: Add iscsi/rdma personalities

This patch adds in the ecore 2 new personalities in addition to
QED_PCI_ETH - QED_PCI_ISCSI and QED_PCI_ETH_ROCE.
Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7a9b6b8f
......@@ -127,6 +127,8 @@ struct qed_tunn_update_params {
*/
enum qed_pci_personality {
QED_PCI_ETH,
QED_PCI_ISCSI,
QED_PCI_ETH_ROCE,
QED_PCI_DEFAULT /* default in shmem */
};
......@@ -170,6 +172,8 @@ enum QED_PORT_MODE {
enum qed_dev_cap {
QED_DEV_CAP_ETH,
QED_DEV_CAP_ISCSI,
QED_DEV_CAP_ROCE,
};
struct qed_hw_info {
......
......@@ -1472,6 +1472,12 @@ static int qed_hw_get_nvm_info(struct qed_hwfn *p_hwfn,
if (device_capabilities & NVM_CFG1_GLOB_DEVICE_CAPABILITIES_ETHERNET)
__set_bit(QED_DEV_CAP_ETH,
&p_hwfn->hw_info.device_capabilities);
if (device_capabilities & NVM_CFG1_GLOB_DEVICE_CAPABILITIES_ISCSI)
__set_bit(QED_DEV_CAP_ISCSI,
&p_hwfn->hw_info.device_capabilities);
if (device_capabilities & NVM_CFG1_GLOB_DEVICE_CAPABILITIES_ROCE)
__set_bit(QED_DEV_CAP_ROCE,
&p_hwfn->hw_info.device_capabilities);
return qed_mcp_fill_shmem_func_info(p_hwfn, p_ptt);
}
......
......@@ -650,7 +650,7 @@ struct mstorm_vf_zone {
/* personality per PF */
enum personality_type {
BAD_PERSONALITY_TYP,
PERSONALITY_RESERVED,
PERSONALITY_ISCSI,
PERSONALITY_RESERVED2,
PERSONALITY_RDMA_AND_ETH,
PERSONALITY_RESERVED3,
......@@ -7072,6 +7072,8 @@ struct public_func {
#define FUNC_MF_CFG_PROTOCOL_MASK 0x000000f0
#define FUNC_MF_CFG_PROTOCOL_SHIFT 4
#define FUNC_MF_CFG_PROTOCOL_ETHERNET 0x00000000
#define FUNC_MF_CFG_PROTOCOL_ISCSI 0x00000010
#define FUNC_MF_CFG_PROTOCOL_ROCE 0x00000030
#define FUNC_MF_CFG_PROTOCOL_MAX 0x00000030
#define FUNC_MF_CFG_MIN_BW_MASK 0x0000ff00
......@@ -7405,6 +7407,8 @@ struct nvm_cfg1_glob {
u32 misc_sig;
u32 device_capabilities;
#define NVM_CFG1_GLOB_DEVICE_CAPABILITIES_ETHERNET 0x1
#define NVM_CFG1_GLOB_DEVICE_CAPABILITIES_ISCSI 0x4
#define NVM_CFG1_GLOB_DEVICE_CAPABILITIES_ROCE 0x8
u32 power_dissipated;
u32 power_consumed;
u32 efi_version;
......
......@@ -207,6 +207,8 @@ int qed_fill_dev_info(struct qed_dev *cdev,
dev_info->pci_mem_start = cdev->pci_params.mem_start;
dev_info->pci_mem_end = cdev->pci_params.mem_end;
dev_info->pci_irq = cdev->pci_params.irq;
dev_info->rdma_supported =
(cdev->hwfns[0].hw_info.personality == QED_PCI_ETH_ROCE);
dev_info->is_mf_default = IS_MF_DEFAULT(&cdev->hwfns[0]);
ether_addr_copy(dev_info->hw_mac, cdev->hwfns[0].hw_info.hw_mac_addr);
......@@ -901,7 +903,8 @@ static int qed_slowpath_stop(struct qed_dev *cdev)
if (IS_PF(cdev)) {
qed_free_stream_mem(cdev);
qed_sriov_disable(cdev, true);
if (IS_QED_ETH_IF(cdev))
qed_sriov_disable(cdev, true);
qed_nic_stop(cdev);
qed_slowpath_irq_free(cdev);
......
......@@ -977,7 +977,18 @@ qed_mcp_get_shmem_proto(struct qed_hwfn *p_hwfn,
switch (p_info->config & FUNC_MF_CFG_PROTOCOL_MASK) {
case FUNC_MF_CFG_PROTOCOL_ETHERNET:
*p_proto = QED_PCI_ETH;
if (test_bit(QED_DEV_CAP_ROCE,
&p_hwfn->hw_info.device_capabilities))
*p_proto = QED_PCI_ETH_ROCE;
else
*p_proto = QED_PCI_ETH;
break;
case FUNC_MF_CFG_PROTOCOL_ISCSI:
*p_proto = QED_PCI_ISCSI;
break;
case FUNC_MF_CFG_PROTOCOL_ROCE:
DP_NOTICE(p_hwfn, "RoCE personality is not a valid value!\n");
rc = -EINVAL;
break;
default:
rc = -EINVAL;
......
......@@ -358,11 +358,26 @@ int qed_sp_pf_start(struct qed_hwfn *p_hwfn,
qed_tunn_set_pf_start_params(p_hwfn, p_tunn,
&p_ramrod->tunnel_config);
p_hwfn->hw_info.personality = PERSONALITY_ETH;
if (IS_MF_SI(p_hwfn))
p_ramrod->allow_npar_tx_switching = allow_npar_tx_switch;
switch (p_hwfn->hw_info.personality) {
case QED_PCI_ETH:
p_ramrod->personality = PERSONALITY_ETH;
break;
case QED_PCI_ISCSI:
p_ramrod->personality = PERSONALITY_ISCSI;
break;
case QED_PCI_ETH_ROCE:
p_ramrod->personality = PERSONALITY_RDMA_AND_ETH;
break;
default:
DP_NOTICE(p_hwfn, "Unkown personality %d\n",
p_hwfn->hw_info.personality);
p_ramrod->personality = PERSONALITY_ETH;
}
if (p_hwfn->cdev->p_iov_info) {
struct qed_hw_sriov_info *p_iov = p_hwfn->cdev->p_iov_info;
......
......@@ -517,9 +517,9 @@ enum mf_mode {
/* Per-protocol connection types */
enum protocol_type {
PROTOCOLID_RESERVED1,
PROTOCOLID_ISCSI,
PROTOCOLID_RESERVED2,
PROTOCOLID_RESERVED3,
PROTOCOLID_ROCE,
PROTOCOLID_CORE,
PROTOCOLID_ETH,
PROTOCOLID_RESERVED4,
......
......@@ -58,8 +58,70 @@ struct qed_eth_pf_params {
u16 num_cons;
};
/* Most of the the parameters below are described in the FW iSCSI / TCP HSI */
struct qed_iscsi_pf_params {
u64 glbl_q_params_addr;
u64 bdq_pbl_base_addr[2];
u32 max_cwnd;
u16 cq_num_entries;
u16 cmdq_num_entries;
u16 dup_ack_threshold;
u16 tx_sws_timer;
u16 min_rto;
u16 min_rto_rt;
u16 max_rto;
/* The following parameters are used during HW-init
* and these parameters need to be passed as arguments
* to update_pf_params routine invoked before slowpath start
*/
u16 num_cons;
u16 num_tasks;
/* The following parameters are used during protocol-init */
u16 half_way_close_timeout;
u16 bdq_xoff_threshold[2];
u16 bdq_xon_threshold[2];
u16 cmdq_xoff_threshold;
u16 cmdq_xon_threshold;
u16 rq_buffer_size;
u8 num_sq_pages_in_ring;
u8 num_r2tq_pages_in_ring;
u8 num_uhq_pages_in_ring;
u8 num_queues;
u8 log_page_size;
u8 rqe_log_size;
u8 max_fin_rt;
u8 gl_rq_pi;
u8 gl_cmd_pi;
u8 debug_mode;
u8 ll2_ooo_queue_id;
u8 ooo_enable;
u8 is_target;
u8 bdq_pbl_num_entries[2];
};
struct qed_rdma_pf_params {
/* Supplied to QED during resource allocation (may affect the ILT and
* the doorbell BAR).
*/
u32 min_dpis; /* number of requested DPIs */
u32 num_mrs; /* number of requested memory regions */
u32 num_qps; /* number of requested Queue Pairs */
u32 num_srqs; /* number of requested SRQ */
u8 roce_edpm_mode; /* see QED_ROCE_EDPM_MODE_ENABLE */
u8 gl_pi; /* protocol index */
/* Will allocate rate limiters to be used with QPs */
u8 enable_dcqcn;
};
struct qed_pf_params {
struct qed_eth_pf_params eth_pf_params;
struct qed_iscsi_pf_params iscsi_pf_params;
struct qed_rdma_pf_params rdma_pf_params;
};
enum qed_int_mode {
......@@ -100,6 +162,8 @@ struct qed_dev_info {
/* MFW version */
u32 mfw_rev;
bool rdma_supported;
u32 flash_size;
u8 mf_mode;
bool tx_switching;
......@@ -111,6 +175,7 @@ enum qed_sb_type {
enum qed_protocol {
QED_PROTOCOL_ETH,
QED_PROTOCOL_ISCSI,
};
struct qed_link_params {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment