irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUG

CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS,
just with less information.

Spring cleanup time.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com>
Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com

Documentation/IRQ-domain.txt

@@ -265,37 +265,5 @@ support other architectures, such as ARM, ARM64 etc.
 
 === Debugging ===
 
-If you switch on CONFIG_IRQ_DOMAIN_DEBUG (which depends on
-CONFIG_IRQ_DOMAIN and CONFIG_DEBUG_FS), you will find a new file in
-your debugfs mount point, called irq_domain_mapping. This file
-contains a live snapshot of all the IRQ domains in the system:
-
- name              mapped  linear-max  direct-max  devtree-node
- pl061                  8           8           0  /smb/gpio@e0080000
- pl061                  8           8           0  /smb/gpio@e1050000
- pMSI                   0           0           0  /interrupt-controller@e1101000/v2m@e0080000
- MSI                   37           0           0  /interrupt-controller@e1101000/v2m@e0080000
- GICv2m                37           0           0  /interrupt-controller@e1101000/v2m@e0080000
- GICv2                448         448           0  /interrupt-controller@e1101000
-
-it also iterates over the interrupts to display their mapping in the
-domains, and makes the domain stacking visible:
-
-
-irq    hwirq    chip name        chip data           active  type            domain
-    1  0x00019  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
-    2  0x0001d  GICv2            0xffff00000916bfd8          LINEAR          GICv2
-    3  0x0001e  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
-    4  0x0001b  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
-    5  0x0001a  GICv2            0xffff00000916bfd8          LINEAR          GICv2
-[...]
-   96  0x81808  MSI              0x          (null)           RADIX          MSI
-   96+ 0x00063  GICv2m           0xffff8003ee116980           RADIX          GICv2m
-   96+ 0x00063  GICv2            0xffff00000916bfd8          LINEAR          GICv2
-   97  0x08800  MSI              0x          (null)     *     RADIX          MSI
-   97+ 0x00064  GICv2m           0xffff8003ee116980     *     RADIX          GICv2m
-   97+ 0x00064  GICv2            0xffff00000916bfd8     *    LINEAR          GICv2
-
-Here, interrupts 1-5 are only using a single domain, while 96 and 97
-are build out of a stack of three domain, each level performing a
-particular function.
+Most of the internals of the IRQ subsystem are exposed in debugfs by
+turning CONFIG_GENERIC_IRQ_DEBUGFS on.

arch/arm/configs/aspeed_g4_defconfig

 CONFIG_KERNEL_XZ=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14

arch/arm/configs/aspeed_g5_defconfig

 CONFIG_KERNEL_XZ=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14

arch/arm/configs/hisi_defconfig

-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y

arch/arm/configs/multi_v7_defconfig

 CONFIG_SYSVIPC=y
 CONFIG_FHANDLE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y

arch/arm/configs/mvebu_v7_defconfig

 CONFIG_SYSVIPC=y
 CONFIG_FHANDLE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y

arch/arm/configs/pxa_defconfig

 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y

arch/arm/configs/sama5_defconfig

@@ -2,7 +2,6 @@
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_FHANDLE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14

arch/arm/configs/tegra_defconfig

 CONFIG_SYSVIPC=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y

arch/arm/configs/vt8500_v6_v7_defconfig

-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/fsl-emb-nonhw.config

@@ -71,7 +71,6 @@ CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_SCTP=m
 CONFIG_IPV6=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_ISO9660_FS=m
 CONFIG_JFFS2_FS_DEBUG=1
 CONFIG_JFFS2_FS=y

arch/powerpc/configs/powernv_defconfig

@@ -4,7 +4,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_TASKSTATS=y

arch/powerpc/configs/ppc64_defconfig

 CONFIG_PPC64=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_TASKSTATS=y

arch/powerpc/configs/pseries_defconfig

@@ -3,7 +3,6 @@ CONFIG_NR_CPUS=2048
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_TASKSTATS=y

arch/xtensa/configs/audio_kc705_defconfig

 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IRQ_TIME_ACCOUNTING=y

arch/xtensa/configs/cadence_csp_defconfig

 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_USELIB=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IRQ_TIME_ACCOUNTING=y

arch/xtensa/configs/generic_kc705_defconfig

 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IRQ_TIME_ACCOUNTING=y

arch/xtensa/configs/nommu_kc705_defconfig

 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IRQ_TIME_ACCOUNTING=y

arch/xtensa/configs/smp_lx200_defconfig

 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_FHANDLE=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IRQ_TIME_ACCOUNTING=y

kernel/irq/Kconfig

@@ -103,16 +103,6 @@ config GENERIC_IRQ_MATRIX_ALLOCATOR
 config GENERIC_IRQ_RESERVATION_MODE
 	bool
 
-config IRQ_DOMAIN_DEBUG
-	bool "Expose hardware/virtual IRQ mapping via debugfs"
-	depends on IRQ_DOMAIN && DEBUG_FS
-	help
-	  This option will show the mapping relationship between hardware irq
-	  numbers and Linux irq numbers. The mapping is exposed via debugfs
-	  in the file "irq_domain_mapping".
-
-	  If you don't know what this means you don't need it.
-
 # Support forced irq threading
 config IRQ_FORCED_THREADING
        bool

kernel/irq/irqdomain.c

@@ -897,124 +897,6 @@ unsigned int irq_find_mapping(struct irq_domain *domain,
 }
 EXPORT_SYMBOL_GPL(irq_find_mapping);
 
-#ifdef CONFIG_IRQ_DOMAIN_DEBUG
-static void virq_debug_show_one(struct seq_file *m, struct irq_desc *desc)
-{
-	struct irq_domain *domain;
-	struct irq_data *data;
-
-	domain = desc->irq_data.domain;
-	data = &desc->irq_data;
-
-	while (domain) {
-		unsigned int irq = data->irq;
-		unsigned long hwirq = data->hwirq;
-		struct irq_chip *chip;
-		bool direct;
-
-		if (data == &desc->irq_data)
-			seq_printf(m, "%5d  ", irq);
-		else
-			seq_printf(m, "%5d+ ", irq);
-		seq_printf(m, "0x%05lx  ", hwirq);
-
-		chip = irq_data_get_irq_chip(data);
-		seq_printf(m, "%-15s  ", (chip && chip->name) ? chip->name : "none");
-
-		seq_printf(m, "0x%p  ", irq_data_get_irq_chip_data(data));
-
-		seq_printf(m, "   %c    ", (desc->action && desc->action->handler) ? '*' : ' ');
-		direct = (irq == hwirq) && (irq < domain->revmap_direct_max_irq);
-		seq_printf(m, "%6s%-8s  ",
-			   (hwirq < domain->revmap_size) ? "LINEAR" : "RADIX",
-			   direct ? "(DIRECT)" : "");
-		seq_printf(m, "%s\n", domain->name);
-#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
-		domain = domain->parent;
-		data = data->parent_data;
-#else
-		domain = NULL;
-#endif
-	}
-}
-
-static int virq_debug_show(struct seq_file *m, void *private)
-{
-	unsigned long flags;
-	struct irq_desc *desc;
-	struct irq_domain *domain;
-	struct radix_tree_iter iter;
-	void __rcu **slot;
-	int i;
-
-	seq_printf(m, " %-16s  %-6s  %-10s  %-10s  %s\n",
-		   "name", "mapped", "linear-max", "direct-max", "devtree-node");
-	mutex_lock(&irq_domain_mutex);
-	list_for_each_entry(domain, &irq_domain_list, link) {
-		struct device_node *of_node;
-		const char *name;
-
-		int count = 0;
-
-		of_node = irq_domain_get_of_node(domain);
-		if (of_node)
-			name = of_node_full_name(of_node);
-		else if (is_fwnode_irqchip(domain->fwnode))
-			name = container_of(domain->fwnode, struct irqchip_fwid,
-					    fwnode)->name;
-		else
-			name = "";
-
-		radix_tree_for_each_slot(slot, &domain->revmap_tree, &iter, 0)
-			count++;
-		seq_printf(m, "%c%-16s  %6u  %10u  %10u  %s\n",
-			   domain == irq_default_domain ? '*' : ' ', domain->name,
-			   domain->revmap_size + count, domain->revmap_size,
-			   domain->revmap_direct_max_irq,
-			   name);
-	}
-	mutex_unlock(&irq_domain_mutex);
-
-	seq_printf(m, "%-5s  %-7s  %-15s  %-*s  %6s  %-14s  %s\n", "irq", "hwirq",
-		      "chip name", (int)(2 * sizeof(void *) + 2), "chip data",
-		      "active", "type", "domain");
-
-	for (i = 1; i < nr_irqs; i++) {
-		desc = irq_to_desc(i);
-		if (!desc)
-			continue;
-
-		raw_spin_lock_irqsave(&desc->lock, flags);
-		virq_debug_show_one(m, desc);
-		raw_spin_unlock_irqrestore(&desc->lock, flags);
-	}
-
-	return 0;
-}
-
-static int virq_debug_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, virq_debug_show, inode->i_private);
-}
-
-static const struct file_operations virq_debug_fops = {
-	.open = virq_debug_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-
-static int __init irq_debugfs_init(void)
-{
-	if (debugfs_create_file("irq_domain_mapping", S_IRUGO, NULL,
-				 NULL, &virq_debug_fops) == NULL)
-		return -ENOMEM;
-
-	return 0;
-}
-__initcall(irq_debugfs_init);
-#endif /* CONFIG_IRQ_DOMAIN_DEBUG */
-
 /**
  * irq_domain_xlate_onecell() - Generic xlate for direct one cell bindings
  *