net: pch_gbe: Remove pch_gbe_hal_setup_init_funcs

The pch_gbe driver calls a pch_gbe_hal_setup_init_funcs function which
ultimately sets the value of one field in struct pch_gbe_phy_info in a
convoluted way.

This patch removes pch_gbe_hal_setup_init_funcs in favor of inlining it,
and in turn its callee pch_gbe_plat_init_function_pointers, into the
single caller pch_gbe_sw_init.

With this pch_gbe_api.c & pch_gbe_api.h are essentially empty, so they
are removed & inclusions of the latter replaced with pch_gbe_phy.h which
was previously being included via pch_gbe_api.h.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/oki-semi/pch_gbe/Makefile

 obj-$(CONFIG_PCH_GBE) += pch_gbe.o
 
 pch_gbe-y := pch_gbe_phy.o pch_gbe_ethtool.o pch_gbe_param.o
-pch_gbe-y += pch_gbe_api.o pch_gbe_main.o
+pch_gbe-y += pch_gbe_main.o

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c

-/*
- * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
- *
- * This code was derived from the Intel e1000e Linux driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-#include "pch_gbe.h"
-#include "pch_gbe_phy.h"
-#include "pch_gbe_api.h"
-
-/**
- * pch_gbe_plat_init_function_pointers - Init func ptrs
- * @hw:	Pointer to the HW structure
- */
-static void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw)
-{
-	/* Set PHY parameter */
-	hw->phy.reset_delay_us     = PCH_GBE_PHY_RESET_DELAY_US;
-}
-
-/**
- * pch_gbe_hal_setup_init_funcs - Initializes function pointers
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:	Successfully
- *	ENOSYS:	Function is not registered
- */
-s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
-{
-	if (!hw->reg) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: Registers not mapped\n");
-		return -ENOSYS;
-	}
-	pch_gbe_plat_init_function_pointers(hw);
-	return 0;
-}

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h

-/*
- * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
- *
- * This code was derived from the Intel e1000e Linux driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef _PCH_GBE_API_H_
-#define _PCH_GBE_API_H_
-
-#include "pch_gbe_phy.h"
-
-s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
-
-#endif

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c

@@ -17,7 +17,7 @@
  * along with this program; if not, see <http://www.gnu.org/licenses/>.
  */
 #include "pch_gbe.h"
-#include "pch_gbe_api.h"
+#include "pch_gbe_phy.h"
 
 /**
  * pch_gbe_stats - Stats item information

drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c

@@ -18,7 +18,7 @@
  */
 
 #include "pch_gbe.h"
-#include "pch_gbe_api.h"
+#include "pch_gbe_phy.h"
 #include <linux/module.h>
 #include <linux/net_tstamp.h>
 #include <linux/ptp_classify.h>
@@ -2037,12 +2037,8 @@ static int pch_gbe_sw_init(struct pch_gbe_adapter *adapter)
 	adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_2048;
 	hw->mac.max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
 	hw->mac.min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+	hw->phy.reset_delay_us = PCH_GBE_PHY_RESET_DELAY_US;
 
-	/* Initialize the hardware-specific values */
-	if (pch_gbe_hal_setup_init_funcs(hw)) {
-		netdev_err(netdev, "Hardware Initialization Failure\n");
-		return -EIO;
-	}
 	if (pch_gbe_alloc_queues(adapter)) {
 		netdev_err(netdev, "Unable to allocate memory for queues\n");
 		return -ENOMEM;