Merge tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest

Pull ktest update from Steven Rostedt:
 "Added ability to have all builds test warnings.

  Fixed failing reboot when the reboot produces a non fatal error.

  Config reading fixes and other cleanups"

* tag 'ktest-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Remove indexes from warnings check
  ktest: Ignore warnings during reboot
  ktest: Search for linux banner for successful reboot
  ktest: Add make_warnings_file and process full warnings
  ktest: Allow a test option to use its default option
  ktest: Strip off '\n' when reading which files were modified
  ktest: Do not require CONSOLE for build or install bisects

tools/testing/ktest/examples/include/patchcheck.conf

@@ -14,6 +14,16 @@
 PATCH_START := HEAD~3
 PATCH_END := HEAD
 
+# Use the oldconfig if build_type wasn't defined
+DEFAULTS IF NOT DEFINED BUILD_TYPE
+DO_BUILD_TYPE := oldconfig
+
+DEFAULTS ELSE
+DO_BUILD_TYPE := ${BUILD_TYPE}
+
+DEFAULTS
+
+
 # Change PATCH_CHECKOUT to be the branch you want to test. The test will
 # do a git checkout of this branch before starting. Obviously both
 # PATCH_START and PATCH_END must be in this branch (and PATCH_START must
@@ -43,6 +53,31 @@ PATCH_TEST_TYPE := boot
 # (space delimited)
 #IGNORE_WARNINGS = 39eaf7ef884dcc44f7ff1bac803ca2a1dcf43544 6edb2a8a385f0cdef51dae37ff23e74d76d8a6ce
 
+# Instead of just checking for warnings to files that are changed
+# it can be advantageous to check for any new warnings. If a
+# header file is changed, it could cause a warning in a file not
+# touched by the commit. To detect these kinds of warnings, you
+# can use the WARNINGS_FILE option.
+#
+# If the variable CREATE_WARNINGS_FILE is set, this config will
+# enable the WARNINGS_FILE during the patchcheck test. Also,
+# before running the patchcheck test, it will create the
+# warnings file.
+#
+DEFAULTS IF DEFINED CREATE_WARNINGS_FILE
+WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file
+
+TEST_START IF DEFINED CREATE_WARNINGS_FILE
+# WARNINGS_FILE is already set by the DEFAULTS above
+TEST_TYPE = make_warnings_file
+# Checkout the commit before the patches to test,
+# and record all the warnings that exist before the patches
+# to test are added
+CHECKOUT = ${PATCHCHECK_START}~1
+# Force a full build
+BUILD_NOCLEAN = 0
+BUILD_TYPE = ${DO_BUILD_TYPE}
+
 # If you are running a multi test, and the test failed on the first
 # test but on, say the 5th patch. If you want to restart on the
 # fifth patch, set PATCH_START1. This will make the first test start
@@ -61,6 +96,7 @@ PATCHCHECK_TYPE = ${PATCH_TEST_TYPE}
 PATCHCHECK_START = ${PATCH_START1}
 PATCHCHECK_END = ${PATCH_END}
 CHECKOUT = ${PATCH_CHECKOUT}
+BUILD_TYPE = ${DO_BUILD_TYPE}
 
 TEST_START IF ${TEST} == patchcheck && ${MULTI}
 TEST_TYPE = patchcheck
@@ -72,3 +108,4 @@ PATCHCHECK_END = ${PATCH_END}
 CHECKOUT = ${PATCH_CHECKOUT}
 # Use multi to test different compilers?
 MAKE_CMD = CC=gcc-4.5.1 make
+BUILD_TYPE = ${DO_BUILD_TYPE}

tools/testing/ktest/ktest.pl

@@ -126,6 +126,7 @@ my $start_minconfig_defined;
 my $output_minconfig;
 my $minconfig_type;
 my $use_output_minconfig;
+my $warnings_file;
 my $ignore_config;
 my $ignore_errors;
 my $addconfig;
@@ -193,6 +194,9 @@ my $patchcheck_end;
 # which would require more options.
 my $buildonly = 1;
 
+# tell build not to worry about warnings, even when WARNINGS_FILE is set
+my $warnings_ok = 0;
+
 # set when creating a new config
 my $newconfig = 0;
 
@@ -235,6 +239,7 @@ my %option_map = (
     "START_MIN_CONFIG"		=> \$start_minconfig,
     "MIN_CONFIG_TYPE"		=> \$minconfig_type,
     "USE_OUTPUT_MIN_CONFIG"	=> \$use_output_minconfig,
+    "WARNINGS_FILE"		=> \$warnings_file,
     "IGNORE_CONFIG"		=> \$ignore_config,
     "TEST"			=> \$run_test,
     "ADD_CONFIG"		=> \$addconfig,
@@ -618,6 +623,18 @@ sub set_value {
     if ($buildonly && $lvalue =~ /^TEST_TYPE(\[.*\])?$/ && $prvalue ne "build") {
 	# Note if a test is something other than build, then we
 	# will need other manditory options.
+	if ($prvalue ne "install") {
+	    # for bisect, we need to check BISECT_TYPE
+	    if ($prvalue ne "bisect") {
+		$buildonly = 0;
+	    }
+	} else {
+	    # install still limits some manditory options.
+	    $buildonly = 2;
+	}
+    }
+
+    if ($buildonly && $lvalue =~ /^BISECT_TYPE(\[.*\])?$/ && $prvalue ne "build") {
 	if ($prvalue ne "install") {
 	    $buildonly = 0;
 	} else {
@@ -1062,7 +1079,7 @@ sub read_config {
 }
 
 sub __eval_option {
-    my ($option, $i) = @_;
+    my ($name, $option, $i) = @_;
 
     # Add space to evaluate the character before $
     $option = " $option";
@@ -1094,7 +1111,11 @@ sub __eval_option {
 	my $o = "$var\[$i\]";
 	my $parento = "$var\[$parent\]";
 
-	if (defined($opt{$o})) {
+	# If a variable contains itself, use the default var
+	if (($var eq $name) && defined($opt{$var})) {
+	    $o = $opt{$var};
+	    $retval = "$retval$o";
+	} elsif (defined($opt{$o})) {
 	    $o = $opt{$o};
 	    $retval = "$retval$o";
 	} elsif ($repeated && defined($opt{$parento})) {
@@ -1118,7 +1139,7 @@ sub __eval_option {
 }
 
 sub eval_option {
-    my ($option, $i) = @_;
+    my ($name, $option, $i) = @_;
 
     my $prev = "";
 
@@ -1134,7 +1155,7 @@ sub eval_option {
 		"Check for recursive variables\n";
 	}
 	$prev = $option;
-	$option = __eval_option($option, $i);
+	$option = __eval_option($name, $option, $i);
     }
 
     return $option;
@@ -1191,11 +1212,24 @@ sub reboot {
     }
 
     if (defined($time)) {
-	if (wait_for_monitor($time, $reboot_success_line)) {
+
+	# We only want to get to the new kernel, don't fail
+	# if we stumble over a call trace.
+	my $save_ignore_errors = $ignore_errors;
+	$ignore_errors = 1;
+
+	# Look for the good kernel to boot
+	if (wait_for_monitor($time, "Linux version")) {
 	    # reboot got stuck?
 	    doprint "Reboot did not finish. Forcing power cycle\n";
 	    run_command "$power_cycle";
 	}
+
+	$ignore_errors = $save_ignore_errors;
+
+	# Still need to wait for the reboot to finish
+	wait_for_monitor($time, $reboot_success_line);
+
 	end_monitor;
     }
 }
@@ -1279,6 +1313,7 @@ sub start_monitor {
 }
 
 sub end_monitor {
+    return if (!defined $console);
     if (--$monitor_cnt) {
 	return;
     }
@@ -1585,7 +1620,7 @@ sub wait_for_input
 
     $rin = '';
     vec($rin, fileno($fp), 1) = 1;
-    $ready = select($rin, undef, undef, $time);
+    ($ready, $time) = select($rin, undef, undef, $time);
 
     $line = "";
 
@@ -1891,23 +1926,102 @@ sub get_version {
 
 sub start_monitor_and_boot {
     # Make sure the stable kernel has finished booting
-    start_monitor;
-    wait_for_monitor 5;
-    end_monitor;
+
+    # Install bisects, don't need console
+    if (defined $console) {
+	start_monitor;
+	wait_for_monitor 5;
+	end_monitor;
+    }
 
     get_grub_index;
     get_version;
     install;
 
-    start_monitor;
+    start_monitor if (defined $console);
     return monitor;
 }
 
+my $check_build_re = ".*:.*(warning|error|Error):.*";
+my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})";
+
+sub process_warning_line {
+    my ($line) = @_;
+
+    chomp $line;
+
+    # for distcc heterogeneous systems, some compilers
+    # do things differently causing warning lines
+    # to be slightly different. This makes an attempt
+    # to fixe those issues.
+
+    # chop off the index into the line
+    # using distcc, some compilers give different indexes
+    # depending on white space
+    $line =~ s/^(\s*\S+:\d+:)\d+/$1/;
+
+    # Some compilers use UTF-8 extended for quotes and some don't.
+    $line =~ s/$utf8_quote/'/g;
+
+    return $line;
+}
+
+# Read buildlog and check against warnings file for any
+# new warnings.
+#
+# Returns 1 if OK
+#         0 otherwise
 sub check_buildlog {
+    return 1 if (!defined $warnings_file);
+
+    my %warnings_list;
+
+    # Failed builds should not reboot the target
+    my $save_no_reboot = $no_reboot;
+    $no_reboot = 1;
+
+    if (-f $warnings_file) {
+	open(IN, $warnings_file) or
+	    dodie "Error opening $warnings_file";
+
+	while (<IN>) {
+	    if (/$check_build_re/) {
+		my $warning = process_warning_line $_;
+		
+		$warnings_list{$warning} = 1;
+	    }
+	}
+	close(IN);
+    }
+
+    # If warnings file didn't exist, and WARNINGS_FILE exist,
+    # then we fail on any warning!
+
+    open(IN, $buildlog) or dodie "Can't open $buildlog";
+    while (<IN>) {
+	if (/$check_build_re/) {
+	    my $warning = process_warning_line $_;
+
+	    if (!defined $warnings_list{$warning}) {
+		fail "New warning found (not in $warnings_file)\n$_\n";
+		$no_reboot = $save_no_reboot;
+		return 0;
+	    }
+	}
+    }
+    $no_reboot = $save_no_reboot;
+    close(IN);
+}
+
+sub check_patch_buildlog {
     my ($patch) = @_;
 
     my @files = `git show $patch | diffstat -l`;
 
+    foreach my $file (@files) {
+	chomp $file;
+    }
+
     open(IN, "git show $patch |") or
 	dodie "failed to show $patch";
     while (<IN>) {
@@ -3055,11 +3169,13 @@ sub patchcheck {
 	    build "oldconfig" or return 0;
 	}
 
-
-	if (!defined($ignored_warnings{$sha1})) {
-	    check_buildlog $sha1 or return 0;
+	# No need to do per patch checking if warnings file exists
+	if (!defined($warnings_file) && !defined($ignored_warnings{$sha1})) {
+	    check_patch_buildlog $sha1 or return 0;
 	}
 
+	check_buildlog or return 0;
+
 	next if ($type eq "build");
 
 	my $failed = 0;
@@ -3617,6 +3733,39 @@ sub make_min_config {
     return 1;
 }
 
+sub make_warnings_file {
+    my ($i) = @_;
+
+    if (!defined($warnings_file)) {
+	dodie "Must define WARNINGS_FILE for make_warnings_file test";
+    }
+
+    if ($build_type eq "nobuild") {
+	dodie "BUILD_TYPE can not be 'nobuild' for make_warnings_file test";
+    }
+
+    build $build_type or dodie "Failed to build";
+
+    open(OUT, ">$warnings_file") or dodie "Can't create $warnings_file";
+
+    open(IN, $buildlog) or dodie "Can't open $buildlog";
+    while (<IN>) {
+
+	# Some compilers use UTF-8 extended for quotes
+	# for distcc heterogeneous systems, this causes issues
+	s/$utf8_quote/'/g;
+
+	if (/$check_build_re/) {
+	    print OUT;
+	}
+    }
+    close(IN);
+
+    close(OUT);
+
+    success $i;
+}
+
 $#ARGV < 1 or die "ktest.pl version: $VERSION\n   usage: ktest.pl config-file\n";
 
 if ($#ARGV == 0) {
@@ -3662,7 +3811,7 @@ EOF
 read_config $ktest_config;
 
 if (defined($opt{"LOG_FILE"})) {
-    $opt{"LOG_FILE"} = eval_option($opt{"LOG_FILE"}, -1);
+    $opt{"LOG_FILE"} = eval_option("LOG_FILE", $opt{"LOG_FILE"}, -1);
 }
 
 # Append any configs entered in manually to the config file.
@@ -3739,7 +3888,7 @@ sub set_test_option {
     my $option = __set_test_option($name, $i);
     return $option if (!defined($option));
 
-    return eval_option($option, $i);
+    return eval_option($name, $option, $i);
 }
 
 # First we need to do is the builds
@@ -3818,9 +3967,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 	$run_type = $bisect_type;
     } elsif ($test_type eq "config_bisect") {
 	$run_type = $config_bisect_type;
-    }
-
-    if ($test_type eq "make_min_config") {
+    } elsif ($test_type eq "make_min_config") {
+	$run_type = "";
+    } elsif ($test_type eq "make_warnings_file") {
 	$run_type = "";
     }
 
@@ -3877,10 +4026,15 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     } elsif ($test_type eq "make_min_config") {
 	make_min_config $i;
 	next;
+    } elsif ($test_type eq "make_warnings_file") {
+	$no_reboot = 1;
+	make_warnings_file $i;
+	next;
     }
 
     if ($build_type ne "nobuild") {
 	build $build_type or next;
+	check_buildlog or next;
     }
 
     if ($test_type eq "install") {

tools/testing/ktest/sample.conf

@@ -793,6 +793,20 @@
 # Example for a virtual guest call "Guest".
 #POWER_OFF = virsh destroy Guest
 
+# To have the build fail on "new" warnings, create a file that
+# contains a list of all known warnings (they must match exactly
+# to the line with 'warning:', 'error:' or 'Error:'. If the option
+# WARNINGS_FILE is set, then that file will be read, and if the
+# build detects a warning, it will examine this file and if the
+# warning does not exist in it, it will fail the build.
+#
+# Note, if this option is defined to a file that does not exist
+# then any warning will fail the build.
+#  (see make_warnings_file below)
+#
+# (optional, default undefined)
+#WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file
+
 # The way to execute a command on the target
 # (default ssh $SSH_USER@$MACHINE $SSH_COMMAND";)
 # The variables SSH_USER, MACHINE and SSH_COMMAND are defined
@@ -1222,3 +1236,33 @@
 #  MIN_CONFIG_TYPE = test
 #  TEST = ssh ${USER}@${MACHINE} echo hi
 #
+#
+#
+#
+# For TEST_TYPE = make_warnings_file
+#
+# If you want the build to fail when a new warning is discovered
+# you set the WARNINGS_FILE to point to a file of known warnings.
+#
+# The test "make_warnings_file" will let you create a new warnings
+# file before you run other tests, like patchcheck.
+#
+# What this test does is to run just a build, you still need to
+# specify BUILD_TYPE to tell the test what type of config to use.
+# A BUILD_TYPE of nobuild will fail this test.
+#
+# The test will do the build and scan for all warnings. Any warning
+# it discovers will be saved in the WARNINGS_FILE (required) option.
+#
+# It is recommended (but not necessary) to make sure BUILD_NOCLEAN is
+# off, so that a full build is done (make mrproper is performed).
+# That way, all warnings will be captured.
+#
+# Example:
+#
+#  TEST_TYPE = make_warnings_file
+#  WARNINGS_FILE = ${OUTPUT_DIR}
+#  BUILD_TYPE = useconfig:oldconfig
+#  CHECKOUT = v3.8
+#  BUILD_NOCLEAN = 0
+#