Commit c6fd2807 authored by Jeff Garzik's avatar Jeff Garzik

Move libata to drivers/ata.

parent 79ed35a9
......@@ -18,6 +18,8 @@ source "drivers/ide/Kconfig"
source "drivers/scsi/Kconfig"
source "drivers/ata/Kconfig"
source "drivers/cdrom/Kconfig"
source "drivers/md/Kconfig"
......
......@@ -34,6 +34,7 @@ obj-$(CONFIG_PPC_PMAC) += macintosh/
obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_FC4) += fc4/
obj-$(CONFIG_SCSI) += scsi/
obj-$(CONFIG_ATA) += ata/
obj-$(CONFIG_FUSION) += message/
obj-$(CONFIG_IEEE1394) += ieee1394/
obj-y += cdrom/
......
config ATA
tristate "ATA device support"
depends on SCSI
---help---
If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
any other ATA device under Linux, say Y and make sure that you know
the name of your ATA host adapter (the card inside your computer
that "speaks" the ATA protocol, also called ATA controller),
because you will be asked for it.
config SCSI_SATA_AHCI
tristate "AHCI SATA support"
depends on ATA && PCI
help
This option enables support for AHCI Serial ATA.
If unsure, say N.
config SCSI_SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
depends on ATA && PCI
help
This option enables support for Broadcom/Serverworks/Apple K2
SATA support.
If unsure, say N.
config SCSI_ATA_PIIX
tristate "Intel PIIX/ICH SATA support"
depends on ATA && PCI
help
This option enables support for ICH5/6/7/8 Serial ATA.
If PATA support was enabled previously, this enables
support for select Intel PIIX/ICH PATA host controllers.
If unsure, say N.
config SCSI_SATA_MV
tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
depends on ATA && PCI && EXPERIMENTAL
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] chips.
If unsure, say N.
config SCSI_SATA_NV
tristate "NVIDIA SATA support"
depends on ATA && PCI
help
This option enables support for NVIDIA Serial ATA.
If unsure, say N.
config SCSI_PDC_ADMA
tristate "Pacific Digital ADMA support"
depends on ATA && PCI
help
This option enables support for Pacific Digital ADMA controllers
If unsure, say N.
config SCSI_SATA_QSTOR
tristate "Pacific Digital SATA QStor support"
depends on ATA && PCI
help
This option enables support for Pacific Digital Serial ATA QStor.
If unsure, say N.
config SCSI_SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
depends on ATA && PCI
help
This option enables support for Promise Serial ATA TX2/TX4.
If unsure, say N.
config SCSI_SATA_SX4
tristate "Promise SATA SX4 support"
depends on ATA && PCI && EXPERIMENTAL
help
This option enables support for Promise Serial ATA SX4.
If unsure, say N.
config SCSI_SATA_SIL
tristate "Silicon Image SATA support"
depends on ATA && PCI
help
This option enables support for Silicon Image Serial ATA.
If unsure, say N.
config SCSI_SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on ATA && PCI
help
This option enables support for Silicon Image 3124/3132 Serial ATA.
If unsure, say N.
config SCSI_SATA_SIS
tristate "SiS 964/180 SATA support"
depends on ATA && PCI
help
This option enables support for SiS Serial ATA 964/180.
If unsure, say N.
config SCSI_SATA_ULI
tristate "ULi Electronics SATA support"
depends on ATA && PCI
help
This option enables support for ULi Electronics SATA.
If unsure, say N.
config SCSI_SATA_VIA
tristate "VIA SATA support"
depends on ATA && PCI
help
This option enables support for VIA Serial ATA.
If unsure, say N.
config SCSI_SATA_VITESSE
tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
depends on ATA && PCI
help
This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
If unsure, say N.
config SCSI_SATA_INTEL_COMBINED
bool
depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX)
default y
obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o
obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o
obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o
obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o
obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o
obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o
obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o
libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o
......@@ -50,7 +50,6 @@
#include <linux/jiffies.h>
#include <linux/scatterlist.h>
#include <scsi/scsi.h>
#include "scsi_priv.h"
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
......
......@@ -39,7 +39,7 @@
#include <scsi/scsi_eh.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
#include "scsi_transport_api.h"
#include "../scsi/scsi_transport_api.h"
#include <linux/libata.h>
......
......@@ -471,67 +471,6 @@ config SCSI_IN2000
source "drivers/scsi/megaraid/Kconfig.megaraid"
config SCSI_SATA
tristate "Serial ATA (SATA) support"
depends on SCSI
help
This driver family supports Serial ATA host controllers
and devices.
If unsure, say N.
config SCSI_SATA_AHCI
tristate "AHCI SATA support"
depends on SCSI_SATA && PCI
help
This option enables support for AHCI Serial ATA.
If unsure, say N.
config SCSI_SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
depends on SCSI_SATA && PCI
help
This option enables support for Broadcom/Serverworks/Apple K2
SATA support.
If unsure, say N.
config SCSI_ATA_PIIX
tristate "Intel PIIX/ICH SATA support"
depends on SCSI_SATA && PCI
help
This option enables support for ICH5/6/7/8 Serial ATA.
If PATA support was enabled previously, this enables
support for select Intel PIIX/ICH PATA host controllers.
If unsure, say N.
config SCSI_SATA_MV
tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] chips.
If unsure, say N.
config SCSI_SATA_NV
tristate "NVIDIA SATA support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for NVIDIA Serial ATA.
If unsure, say N.
config SCSI_PDC_ADMA
tristate "Pacific Digital ADMA support"
depends on SCSI_SATA && PCI
help
This option enables support for Pacific Digital ADMA controllers
If unsure, say N.
config SCSI_HPTIOP
tristate "HighPoint RocketRAID 3xxx Controller support"
depends on SCSI && PCI
......@@ -542,83 +481,6 @@ config SCSI_HPTIOP
To compile this driver as a module, choose M here; the module
will be called hptiop. If unsure, say N.
config SCSI_SATA_QSTOR
tristate "Pacific Digital SATA QStor support"
depends on SCSI_SATA && PCI
help
This option enables support for Pacific Digital Serial ATA QStor.
If unsure, say N.
config SCSI_SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
depends on SCSI_SATA && PCI
help
This option enables support for Promise Serial ATA TX2/TX4.
If unsure, say N.
config SCSI_SATA_SX4
tristate "Promise SATA SX4 support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for Promise Serial ATA SX4.
If unsure, say N.
config SCSI_SATA_SIL
tristate "Silicon Image SATA support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for Silicon Image Serial ATA.
If unsure, say N.
config SCSI_SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for Silicon Image 3124/3132 Serial ATA.
If unsure, say N.
config SCSI_SATA_SIS
tristate "SiS 964/180 SATA support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for SiS Serial ATA 964/180.
If unsure, say N.
config SCSI_SATA_ULI
tristate "ULi Electronics SATA support"
depends on SCSI_SATA && PCI && EXPERIMENTAL
help
This option enables support for ULi Electronics SATA.
If unsure, say N.
config SCSI_SATA_VIA
tristate "VIA SATA support"
depends on SCSI_SATA && PCI
help
This option enables support for VIA Serial ATA.
If unsure, say N.
config SCSI_SATA_VITESSE
tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
depends on SCSI_SATA && PCI
help
This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
If unsure, say N.
config SCSI_SATA_INTEL_COMBINED
bool
depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX)
default y
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
......
......@@ -122,21 +122,6 @@ obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
obj-$(CONFIG_SCSI_IPR) += ipr.o
obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/
obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o
obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o
obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o
obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o
obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o
obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o
obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o
obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o
obj-$(CONFIG_ARM) += arm/
......@@ -166,7 +151,6 @@ ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
zalon7xx-objs := zalon.o ncr53c8xx.o
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o
oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o
# Files generated that shall be removed upon make clean
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment