Commit c73c556c authored by Darrick J. Wong's avatar Darrick J. Wong Committed by Jean Delvare

hwmon: (adt7473) Fix some bogosity in documentation file

Signed-off-by: default avatarDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent ddedc658
...@@ -14,14 +14,14 @@ Description ...@@ -14,14 +14,14 @@ Description
This driver implements support for the Analog Devices ADT7473 chip family. This driver implements support for the Analog Devices ADT7473 chip family.
The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0
specification. Using an analog to digital converter it measures three (3) specification. Using an analog to digital converter it measures three (3)
temperatures and two (2) voltages. It has three (3) 16-bit counters for temperatures and two (2) voltages. It has four (4) 16-bit counters for
measuring fan speed. There are three (3) PWM outputs that can be used measuring fan speed. There are three (3) PWM outputs that can be used
to control fan speed. to control fan speed.
A sophisticated control system for the PWM outputs is designed into the A sophisticated control system for the PWM outputs is designed into the
LM85 that allows fan speed to be adjusted automatically based on any of the ADT7473 that allows fan speed to be adjusted automatically based on any of the
three temperature sensors. Each PWM output is individually adjustable and three temperature sensors. Each PWM output is individually adjustable and
programmable. Once configured, the ADT7473 will adjust the PWM outputs in programmable. Once configured, the ADT7473 will adjust the PWM outputs in
response to the measured temperatures without further host intervention. response to the measured temperatures without further host intervention.
...@@ -46,14 +46,6 @@ from the raw value to get the temperature value. ...@@ -46,14 +46,6 @@ from the raw value to get the temperature value.
The Analog Devices datasheet is very detailed and describes a procedure for The Analog Devices datasheet is very detailed and describes a procedure for
determining an optimal configuration for the automatic PWM control. determining an optimal configuration for the automatic PWM control.
Hardware Configurations
-----------------------
The ADT7473 chips have an optional SMBALERT output that can be used to
signal the chipset in case a limit is exceeded or the temperature sensors
fail. Individual sensor interrupts can be masked so they won't trigger
SMBALERT. The SMBALERT output if configured replaces the PWM2 function.
Configuration Notes Configuration Notes
------------------- -------------------
...@@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following: ...@@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following:
* PWM Control * PWM Control
* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and * pwm#_auto_point1_pwm and temp#_auto_point1_temp and
* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - * pwm#_auto_point2_pwm and temp#_auto_point2_temp -
point1: Set the pwm speed at a lower temperature bound. point1: Set the pwm speed at a lower temperature bound.
point2: Set the pwm speed at a higher temperature bound. point2: Set the pwm speed at a higher temperature bound.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment