Commit c7582ff7 authored by Andy Shevchenko's avatar Andy Shevchenko

platform/x86: intel_cht_int33fe: Fix spelling issues

Fix spelling issues over the comments in the code.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: default avatarHans de Goede <hdegoede@redhat.com>
Tested-by: default avatarHans de Goede <hdegoede@redhat.com>
Reviewed-by: default avatarHeikki Krogerus <heikki.krogerus@linux.intel.com>
parent 7b839f76
...@@ -6,14 +6,14 @@ ...@@ -6,14 +6,14 @@
* *
* Some Intel Cherry Trail based device which ship with Windows 10, have * Some Intel Cherry Trail based device which ship with Windows 10, have
* this weird INT33FE ACPI device with a CRS table with 4 I2cSerialBusV2 * this weird INT33FE ACPI device with a CRS table with 4 I2cSerialBusV2
* resources, for 4 different chips attached to various i2c busses: * resources, for 4 different chips attached to various I²C buses:
* 1. The Whiskey Cove pmic, which is also described by the INT34D3 ACPI device * 1. The Whiskey Cove PMIC, which is also described by the INT34D3 ACPI device
* 2. Maxim MAX17047 Fuel Gauge Controller * 2. Maxim MAX17047 Fuel Gauge Controller
* 3. FUSB302 USB Type-C Controller * 3. FUSB302 USB Type-C Controller
* 4. PI3USB30532 USB switch * 4. PI3USB30532 USB switch
* *
* So this driver is a stub / pseudo driver whose only purpose is to * So this driver is a stub / pseudo driver whose only purpose is to
* instantiate i2c-clients for chips 2 - 4, so that standard i2c drivers * instantiate I²C clients for chips 2 - 4, so that standard I²C drivers
* for these chips can bind to the them. * for these chips can bind to the them.
*/ */
...@@ -29,11 +29,11 @@ ...@@ -29,11 +29,11 @@
#include "intel_cht_int33fe_common.h" #include "intel_cht_int33fe_common.h"
/* /*
* Grrr I severly dislike buggy BIOS-es. At least one BIOS enumerates * Grrr, I severely dislike buggy BIOS-es. At least one BIOS enumerates
* the max17047 both through the INT33FE ACPI device (it is right there * the max17047 both through the INT33FE ACPI device (it is right there
* in the resources table) as well as through a separate MAX17047 device. * in the resources table) as well as through a separate MAX17047 device.
* *
* These helpers are used to work around this by checking if an i2c-client * These helpers are used to work around this by checking if an I²C client
* for the max17047 has already been registered. * for the max17047 has already been registered.
*/ */
static int cht_int33fe_check_for_max17047(struct device *dev, void *data) static int cht_int33fe_check_for_max17047(struct device *dev, void *data)
...@@ -235,9 +235,9 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data) ...@@ -235,9 +235,9 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047); i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047);
if (max17047) { if (max17047) {
/* Pre-existing i2c-client for the max17047, add device-props */ /* Pre-existing I²C client for the max17047, add device properties */
set_secondary_fwnode(&max17047->dev, fwnode); set_secondary_fwnode(&max17047->dev, fwnode);
/* And re-probe to get the new device-props applied. */ /* And re-probe to get the new device properties applied */
ret = device_reprobe(&max17047->dev); ret = device_reprobe(&max17047->dev);
if (ret) if (ret)
dev_warn(dev, "Reprobing max17047 error: %d\n", ret); dev_warn(dev, "Reprobing max17047 error: %d\n", ret);
...@@ -272,7 +272,7 @@ int cht_int33fe_typec_probe(struct cht_int33fe_data *data) ...@@ -272,7 +272,7 @@ int cht_int33fe_typec_probe(struct cht_int33fe_data *data)
* must be registered before the fusb302 is instantiated, otherwise * must be registered before the fusb302 is instantiated, otherwise
* it will end up with a dummy-regulator. * it will end up with a dummy-regulator.
* Note "cht_wc_usb_typec_vbus" comes from the regulator_init_data * Note "cht_wc_usb_typec_vbus" comes from the regulator_init_data
* which is defined in i2c-cht-wc.c from where the bq24292i i2c-client * which is defined in i2c-cht-wc.c from where the bq24292i I²C client
* gets instantiated. We use regulator_get_optional here so that we * gets instantiated. We use regulator_get_optional here so that we
* don't end up getting a dummy-regulator ourselves. * don't end up getting a dummy-regulator ourselves.
*/ */
...@@ -283,7 +283,7 @@ int cht_int33fe_typec_probe(struct cht_int33fe_data *data) ...@@ -283,7 +283,7 @@ int cht_int33fe_typec_probe(struct cht_int33fe_data *data)
} }
regulator_put(regulator); regulator_put(regulator);
/* The FUSB302 uses the irq at index 1 and is the only irq user */ /* The FUSB302 uses the IRQ at index 1 and is the only IRQ user */
fusb302_irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 1); fusb302_irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 1);
if (fusb302_irq < 0) { if (fusb302_irq < 0) {
if (fusb302_irq != -EPROBE_DEFER) if (fusb302_irq != -EPROBE_DEFER)
...@@ -295,7 +295,7 @@ int cht_int33fe_typec_probe(struct cht_int33fe_data *data) ...@@ -295,7 +295,7 @@ int cht_int33fe_typec_probe(struct cht_int33fe_data *data)
if (ret) if (ret)
return ret; return ret;
/* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047 */ /* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047() */
ret = cht_int33fe_register_max17047(dev, data); ret = cht_int33fe_register_max17047(dev, data);
if (ret) if (ret)
goto out_remove_nodes; goto out_remove_nodes;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment