Commit c7d8669f authored by Tony Lindgren's avatar Tony Lindgren

bus: ti-sysc: Fix watchdog quirk handling

I noticed that when probed with ti-sysc, watchdog can trigger on am3, am4
and dra7 causing a device reset.

Turns out I made several mistakes implementing the watchdog quirk handling:

1. We must do both writes to spr register

2. We must also call the reset quirk on disable

3. On am3 and am4 we need to also set swsup quirk flag

I probably only tested this earlier with watchdog service running when the
watchdog never gets disabled.

Fixes: 4e23be47 ("bus: ti-sysc: Add support for module specific reset quirks")
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 54ecb8f7
......@@ -74,6 +74,7 @@ static const char * const clock_names[SYSC_MAX_CLOCKS] = {
* @clk_disable_quirk: module specific clock disable quirk
* @reset_done_quirk: module specific reset done quirk
* @module_enable_quirk: module specific enable quirk
* @module_disable_quirk: module specific disable quirk
*/
struct sysc {
struct device *dev;
......@@ -100,6 +101,7 @@ struct sysc {
void (*clk_disable_quirk)(struct sysc *sysc);
void (*reset_done_quirk)(struct sysc *sysc);
void (*module_enable_quirk)(struct sysc *sysc);
void (*module_disable_quirk)(struct sysc *sysc);
};
static void sysc_parse_dts_quirks(struct sysc *ddata, struct device_node *np,
......@@ -959,6 +961,9 @@ static int sysc_disable_module(struct device *dev)
if (ddata->offsets[SYSC_SYSCONFIG] == -ENODEV)
return 0;
if (ddata->module_disable_quirk)
ddata->module_disable_quirk(ddata);
regbits = ddata->cap->regbits;
reg = sysc_read(ddata, ddata->offsets[SYSC_SYSCONFIG]);
......@@ -1248,6 +1253,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_MODULE_QUIRK_SGX),
SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
SYSC_MODULE_QUIRK_WDT),
/* Watchdog on am3 and am4 */
SYSC_QUIRK("wdt", 0x44e35000, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
SYSC_MODULE_QUIRK_WDT | SYSC_QUIRK_SWSUP_SIDLE),
#ifdef DEBUG
SYSC_QUIRK("adc", 0, 0, 0x10, -1, 0x47300001, 0xffffffff, 0),
......@@ -1440,14 +1448,14 @@ static void sysc_reset_done_quirk_wdt(struct sysc *ddata)
!(val & 0x10), 100,
MAX_MODULE_SOFTRESET_WAIT);
if (error)
dev_warn(ddata->dev, "wdt disable spr failed\n");
dev_warn(ddata->dev, "wdt disable step1 failed\n");
sysc_write(ddata, wps, 0x5555);
sysc_write(ddata, spr, 0x5555);
error = readl_poll_timeout(ddata->module_va + wps, val,
!(val & 0x10), 100,
MAX_MODULE_SOFTRESET_WAIT);
if (error)
dev_warn(ddata->dev, "wdt disable wps failed\n");
dev_warn(ddata->dev, "wdt disable step2 failed\n");
}
static void sysc_init_module_quirks(struct sysc *ddata)
......@@ -1471,8 +1479,10 @@ static void sysc_init_module_quirks(struct sysc *ddata)
if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_SGX)
ddata->module_enable_quirk = sysc_module_enable_quirk_sgx;
if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_WDT)
if (ddata->cfg.quirks & SYSC_MODULE_QUIRK_WDT) {
ddata->reset_done_quirk = sysc_reset_done_quirk_wdt;
ddata->module_disable_quirk = sysc_reset_done_quirk_wdt;
}
}
static int sysc_clockdomain_init(struct sysc *ddata)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment