ARM: i.MX28: dts: rename usbphy pin names

The pins have nothing todo with the phy layer. We better rename them, so
it gets clear they are routed to the ehci core not to any phy.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx28-cfa10037.dts

@@ -54,7 +54,7 @@ usbphy1: usbphy@8007e000 {
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};

arch/arm/boot/dts/imx28-cfa10049.dts

@@ -298,7 +298,7 @@ lradc@80050000 {
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};

arch/arm/boot/dts/imx28-cfa10057.dts

@@ -134,7 +134,7 @@ usbphy1: usbphy@8007e000 {
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};

arch/arm/boot/dts/imx28-cfa10058.dts

@@ -101,7 +101,7 @@ usbphy1: usbphy@8007e000 {
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};

arch/arm/boot/dts/imx28-m28cu3.dts

@@ -180,7 +180,7 @@ ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			disable-over-current;
 			status = "okay";
 		};

arch/arm/boot/dts/imx28-m28evk.dts

@@ -248,14 +248,14 @@ ahb@80080000 {
 		usb0: usb@80080000 {
 			vbus-supply = <&reg_usb0_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy0_pins_a>;
+			pinctrl-0 = <&usb0_pins_a>;
 			status = "okay";
 		};
 
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			status = "okay";
 		};
 

arch/arm/boot/dts/imx28-sps1.dts

@@ -106,7 +106,7 @@ ahb@80080000 {
 		usb0: usb@80080000 {
 			vbus-supply = <&reg_usb0_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy0_pins_b>;
+			pinctrl-0 = <&usb0_pins_b>;
 			status = "okay";
 		};
 

arch/arm/boot/dts/imx28.dtsi

@@ -783,7 +783,7 @@ MX28_PAD_SSP3_SS0__SSP3_D3
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy0_pins_a: usbphy0@0 {
+				usb0_pins_a: usb0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
@@ -793,7 +793,7 @@ MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy0_pins_b: usbphy0@1 {
+				usb0_pins_b: usb0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
 						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
@@ -803,7 +803,7 @@ MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy1_pins_a: usbphy1@0 {
+				usb1_pins_a: usb1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT